This skript'n'patch creates Documentation/scsi and moves the scsi-related
documentation into. The docs are collected from Documentation/ and
drivers/scsi/*.
It also does:
-kill Changelog.serverraid. It's an older copy of Changelog.ids,
-fixes the references to the docs in drivers and Config.help,
-renames the files from README.* to *.txt to look the same way like the other
Documentation directories.
-makes some minor changes (all but one cosmetic) to the docs. The one not
cosmetic is the patch to cpqfc.txt, which kills 2 lines describing how to
include the driver into the kernel.
Depends on my patch to Documentation/00-INDEX!
Eike
Here comes the script:
---------------------
#!/bin/bash
mkdir Documentation/scsi
mv drivers/scsi/README.* Documentation/scsi/
rm drivers/scsi/ChangeLog.serverraid
mv drivers/scsi/ChangeLog.* Documentation/scsi/
mv drivers/scsi/LICENSE.FlashPoint Documentation/scsi/
mv drivers/scsi/aic7xxx_old/README.aic7xxx Documentation/scsi/README.aic7xxx_old
mv drivers/scsi/sym53c8xx_2/ChangeLog.txt Documentation/scsi/ChangeLog.sym53c8xx_2
mv drivers/scsi/sym53c8xx_2/Documentation.txt Documentation/scsi/README.sym53c8xx_2
mv drivers/scsi/cpqfc.Readme Documentation/scsi/cpqfc.txt
mv Documentation/scsi.txt Documentation/scsi/
mv Documentation/scsi-generic.txt Documentation/scsi/
mv Documentation/README.nsp_cs.eng Documentation/scsi/NinjaSCSI.txt
cd Documentation/scsi
for i in README.*; do
mv $i `echo $i| sed 's/README\.//'`.txt
done
cd ../..
---------------------
diff -Naur linux-2.5.7-scsi-doc-moved/Documentation/00-INDEX linux-2.5.7-scsi-doc/Documentation/00-INDEX
--- linux-2.5.7-scsi-doc-moved/Documentation/00-INDEX Sun Mar 24 20:59:55 2002
+++ linux-2.5.7-scsi-doc/Documentation/00-INDEX Sun Mar 24 20:59:12 2002
@@ -34,8 +34,6 @@
- info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux
README.moxa
- release notes for Moxa mutiport serial card.
-README.nsp_cs.eng
- - info on WorkBiT NinjaSCSI-3/32Bi driver.
SAK.txt
- info on Secure Attention Keys.
SubmittingDrivers
@@ -188,10 +186,8 @@
- directory with info on using Linux on the IBM S390.
sh/
- directory with info on porting Linux to a new architecture.
-scsi-generic.txt
- - info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
-scsi.txt
- - short blurb on using SCSI support as a module.
+scsi/
+ - directory with info on Linux scsi support.
serial-console.txt
- how to set up Linux with a serial line console as the default.
sgi-visws.txt
diff -Naur linux-2.5.7-scsi-doc-moved/Documentation/scsi/00-INDEX linux-2.5.7-scsi-doc/Documentation/scsi/00-INDEX
--- linux-2.5.7-scsi-doc-moved/Documentation/scsi/00-INDEX Thu Jan 1 01:00:00 1970
+++ linux-2.5.7-scsi-doc/Documentation/scsi/00-INDEX Thu Mar 21 08:42:22 2002
@@ -0,0 +1,66 @@
+00-INDEX
+ - this file
+53c700.txt
+ - info on driver for 53c700 based adapters
+AM53C974.txt
+ - info on driver for AM53c974 based adapters
+BusLogic.txt
+ - info on driver for adapters with BusLogic chips
+ChangeLog
+ - Changes to scsi files, if not listed elsewhere
+ChangeLog.ips
+ - IBM ServeRAID driver Changelog
+ChangeLog.ncr53c8xx
+ - Changes to ncr53c8xx driver
+ChangeLog.sym53c8xx
+ - Changes to sym53c8xx driver
+ChangeLog.sym53c8xx_2
+ - Changes to second generation of sym53c8xx driver
+FlashPoint.txt
+ - info on driver for BusLogic FlashPoint adapters
+LICENSE.FlashPoint
+ - Licence of the Flashpoint driver
+Mylex.txt
+ - info on driver for Mylex adapters
+NinjaSCSI.txt
+ - info on WorkBiT NinjaSCSI-32/32Bi driver
+aha152x.txt
+ - info on driver for Adaptec AHA152x based adapters
+aic7xxx.txt
+ - info on driver for Adaptec controllers
+aic7xxx_old.txt
+ - info on driver for Adaptec controllers, old generation
+cpqfc.txt
+ - info on driver for Compaq Tachyon TS adapters
+dpti.txt
+ - info on driver for DPT SmartRAID and Adaptec I2O RAID based adapters
+dtc3x80.txt
+ - info on driver for DTC 2x80 based adapters
+g_NCR5380.txt
+ - info on driver for NCR5380 and NCR53c400 based adapters
+ibmmca.txt
+ - info on driver for IBM adapters with MCA bus
+in2000.txt
+ - info on in2000 driver
+ncr53c7xx.txt
+ - info on driver for NCR53c7xx based adapters
+ncr53c8xx.txt
+ - info on driver for NCR53c8xx based adapters
+osst.txt
+ - info on driver for OnStream SC-x0 SCSI tape
+ppa.txt
+ - info on driver for IOmega zip drive
+qlogicfas.txt
+ - info on driver for QLogic FASxxx based adapters
+qlogicisp.txt
+ - info on driver for QLogic ISP 1020 based adapters
+scsi-generic.txt
+ - info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
+scsi.txt
+ - short blurb on using SCSI support as a module.
+st.txt
+ - info on scsi tape driver
+sym53c8xx_2.txt
+ - info on second generation driver for sym53c8xx based adapters
+tmscsim.txt
+ - info on driver for AM53c974 based adapters
diff -Naur linux-2.5.7-scsi-doc-moved/Documentation/scsi/ChangeLog.ips linux-2.5.7-scsi-doc/Documentation/scsi/ChangeLog.ips
--- linux-2.5.7-scsi-doc-moved/Documentation/scsi/ChangeLog.ips Tue Mar 19 11:21:46 2002
+++ linux-2.5.7-scsi-doc/Documentation/scsi/ChangeLog.ips Tue Mar 19 10:53:49 2002
@@ -86,4 +86,3 @@
- Fixed read/write errors when the adapter is using an
8K stripe size.
-
\ No newline at end of file
diff -Naur linux-2.5.7-scsi-doc-moved/Documentation/scsi/ChangeLog.sym53c8xx_2 linux-2.5.7-scsi-doc/Documentation/scsi/ChangeLog.sym53c8xx_2
--- linux-2.5.7-scsi-doc-moved/Documentation/scsi/ChangeLog.sym53c8xx_2 Tue Mar 19 11:21:45 2002
+++ linux-2.5.7-scsi-doc/Documentation/scsi/ChangeLog.sym53c8xx_2 Tue Mar 19 10:53:49 2002
@@ -142,7 +142,3 @@
consistent with what archs are expecting.
- Use MMIO per default for Power PC instead of some fake normal IO,
as Paul Mackerras stated that MMIO works fine now on this arch.
-
-
-
-
diff -Naur linux-2.5.7-scsi-doc-moved/Documentation/scsi/FlashPoint.txt linux-2.5.7-scsi-doc/Documentation/scsi/FlashPoint.txt
--- linux-2.5.7-scsi-doc-moved/Documentation/scsi/FlashPoint.txt Tue Mar 19 11:21:46 2002
+++ linux-2.5.7-scsi-doc/Documentation/scsi/FlashPoint.txt Tue Mar 19 10:53:49 2002
@@ -60,7 +60,7 @@
Mylex Corp.
510/796-6100
peters@mylex.com
-
+
ANNOUNCEMENT
BusLogic FlashPoint LT/BT-948 Upgrade Program
1 February 1996
diff -Naur linux-2.5.7-scsi-doc-moved/Documentation/scsi/cpqfc.txt linux-2.5.7-scsi-doc/Documentation/scsi/cpqfc.txt
--- linux-2.5.7-scsi-doc-moved/Documentation/scsi/cpqfc.txt Tue Mar 19 11:21:46 2002
+++ linux-2.5.7-scsi-doc/Documentation/scsi/cpqfc.txt Tue Mar 19 14:11:56 2002
@@ -91,8 +91,6 @@
using "qa_test" (esp. io_test script) suite modified from Unix tests.
Installation:
-copy file cpqfcTS.patch to /usr/src/linux
-patch -p1 < cpqfcTS.patch
make menuconfig
(select SCSI low-level, Compaq FC HBA)
make dep
diff -Naur linux-2.5.7-scsi-doc-moved/Documentation/scsi/dtc3x80.txt linux-2.5.7-scsi-doc/Documentation/scsi/dtc3x80.txt
--- linux-2.5.7-scsi-doc-moved/Documentation/scsi/dtc3x80.txt Tue Mar 19 11:21:46 2002
+++ linux-2.5.7-scsi-doc/Documentation/scsi/dtc3x80.txt Tue Mar 19 10:53:49 2002
@@ -41,5 +41,3 @@
nowhere, I give up. So.....This driver does NOT use interrupts, even
if you have the card jumpered to an IRQ. Probably nobody will ever
care.
-
-
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/Config.help linux-2.5.7-scsi-doc/drivers/scsi/Config.help
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/Config.help Tue Mar 19 11:21:46 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/Config.help Tue Mar 19 15:12:43 2002
@@ -29,7 +29,7 @@
inserted in and removed from the running kernel whenever you want).
The module will be called sd_mod.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
- <file:Documentation/scsi.txt>. Do not compile this driver as a
+ <file:Documentation/scsi/scsi.txt>. Do not compile this driver as a
module if your root file system (the one containing the directory /)
is located on a SCSI disk. In this case, do not compile the driver
for your SCSI host adapter (below) as a module either.
@@ -51,14 +51,14 @@
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, and
- <file:drivers/scsi/README.st> in the kernel source. This is NOT for
- SCSI CD-ROMs.
+ <file:Documentation/scsi/st.txt> in the kernel source. This is
+ NOT for SCSI CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called st.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
- <file:Documentation/scsi.txt>.
+ <file:Documentation/scsi/scsi.txt>.
CONFIG_CHR_DEV_OSST
The OnStream SC-x0 SCSI tape drives can not be driven by the
@@ -70,7 +70,7 @@
tapes (QIC-157) and can be driven by the standard driver st.
For more information, you may have a look at the SCSI-HOWTO
<http://www.linuxdoc.org/docs.html#howto> and
- <file:drivers/scsi/README.osst> in the kernel source.
+ <file:Documentation/scsi/osst.txt> in the kernel source.
More info on the OnStream driver may be found on
<http://linux1.onstream.nl/test/>
Please also have a look at the standard st docu, as most of it
@@ -80,7 +80,7 @@
inserted in and removed from the running kernel whenever you want).
The module will be called osst.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
- <file:Documentation/scsi.txt>.
+ <file:Documentation/scsi/scsi.txt>.
CONFIG_BLK_DEV_SR
If you want to use a SCSI CD-ROM under Linux, say Y and read the
@@ -92,7 +92,7 @@
inserted in and removed from the running kernel whenever you want).
The module will be called sr_mod.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
- <file:Documentation/scsi.txt>.
+ <file:Documentation/scsi/scsi.txt>.
CONFIG_SR_EXTRA_DEVS
This controls the amount of additional space allocated in tables for
@@ -133,8 +133,8 @@
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> and
- <file:Documentation/scsi.txt>. The module will be called sg.o. If unsure,
- say N.
+ <file:Documentation/scsi/scsi.txt>. The module will be called sg.o.
+ If unsure, say N.
CONFIG_SCSI_MULTI_LUN
If you have a SCSI device that supports more than one LUN (Logical
@@ -194,7 +194,7 @@
It is explained in section 3.3 of the SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. You might also want to
- read the file <file:drivers/scsi/README.aha152x>.
+ read the file <file:Documentation/scsi/aha152x.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
@@ -229,7 +229,7 @@
CONFIG_SCSI_DPT_I2O
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
- driver by Deanna Bonds. See <file:drivers/scsi/README.dpti>.
+ driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
@@ -266,7 +266,7 @@
Information on the configuration options for this controller can be
found by checking the help file for each of the available
configuration options. You should read
- <file:drivers/scsi/aic7xxx_old/README.aic7xxx> at a minimum before
+ <file:Documentation/scsi/aic7xxx_old.txt> at a minimum before
contacting the maintainer with any questions. The SCSI-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>, can also
be of great help.
@@ -289,19 +289,19 @@
If you say Y here, you can still turn off TCQ on troublesome devices
with the use of the tag_info boot parameter. See the file
- <file:drivers/scsi/README.aic7xxx> for more information on that and
- other aic7xxx setup commands. If this option is turned off, you may
- still enable TCQ on known good devices by use of the tag_info boot
- parameter.
+ <file:Documentation/scsi/aic7xxx_old.txt> for more information on
+ that and other aic7xxx setup commands. If this option is turned off,
+ you may still enable TCQ on known good devices by use of the tag_info
+ boot parameter.
If you are unsure about your devices then it is safest to say N
here.
However, TCQ can increase performance on some hard drives by as much
as 50% or more, so it is recommended that if you say N here, you
- should at least read the <file:drivers/scsi/README.aic7xxx> file so
- you will know how to enable this option manually should your drives
- prove to be safe in regards to TCQ.
+ should at least read the <file:Documentation/scsi/aic7xxx_old.txt>
+ file so you will know how to enable this option manually should your
+ drives prove to be safe in regards to TCQ.
Conversely, certain drives are known to lock up or cause bus resets
when TCQ is enabled on them. If you have a Western Digital
@@ -358,10 +358,10 @@
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, and the files
- <file:drivers/scsi/README.BusLogic> and
- <file:drivers/scsi/README.FlashPoint> for more information. If this
- driver does not work correctly without modification, please contact
- the author, Leonard N. Zubkoff, by email to lnz@dandelion.com.
+ <file:Documentation/scsi/BusLogic.txt> and
+ <file:Documentation/scsi/FlashPoint.txt> for more information. If
+ this driver does not work correctly without modification, please
+ contact the author, Leonard N. Zubkoff, by email to lnz@dandelion.com.
You can also build this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
@@ -377,7 +377,8 @@
CONFIG_SCSI_CPQFCTS
Say Y here to compile in support for the Compaq StorageWorks Fibre
- Channel 64-bit/66Mhz Host Bus Adapter.
+ Channel 64-bit/66Mhz Host Bus Adapter. Read
+ <file:Documentation/scsi/cpqfc.txt> for more information.
CONFIG_SCSI_DMX3191D
This is support for Domex DMX3191D SCSI Host Adapters.
@@ -391,7 +392,7 @@
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, and the file
- <file:drivers/scsi/README.dtc3x80>.
+ <file:Documentation/scsi/dtc3x80.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
@@ -507,7 +508,7 @@
for the Trantor T130B in its default configuration; you might have
to pass a command line option to the kernel at boot time if it does
not detect your card. See the file
- <file:drivers/scsi/README.g_NCR5380> for details.
+ <file:Documentation/scsi/g_NCR5380.txt> for details.
CONFIG_SCSI_G_NCR5380_PORT
The NCR5380 and NCR53c400 SCSI controllers come in two varieties:
@@ -536,8 +537,8 @@
<http://www.linuxdoc.org/docs.html#howto>. If it doesn't work out
of the box, you may have to change some settings in
<file:drivers/scsi/53c7,8xx.h>. Please read
- <file:drivers/scsi/README.ncr53c7xx> for the available boot time
- command line options.
+ <file:Documentation/scsi/ncr53c7xx.txt> for the available boot
+ time command line options.
Note: there is another driver for the 53c8xx family of controllers
("NCR53C8XX SCSI support" below). If you want to use them both, you
@@ -581,7 +582,7 @@
If your system has problems using this new major version of the
SYM53C8XX driver, you may switch back to driver version 1.
- Please read <file:drivers/scsi/sym53c8xx_2/Documentation.txt> for more
+ Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more
information.
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
@@ -638,7 +639,7 @@
only one may be active at a time. If you have a 53c8xx board, you
probably do not want to use the "NCR53c7,8xx SCSI support".
- Please read <file:drivers/scsi/README.ncr53c8xx> for more
+ Please read <file:Documentation/scsi/ncr53c8xx.txt> for more
information.
CONFIG_SCSI_SYM53C8XX
@@ -662,7 +663,7 @@
SYM53C8XX driver, thus allowing the NCR53C8XX driver to attach them.
The 'excl' option is also supported by the NCR53C8XX driver.
- Please read <file:drivers/scsi/README.ncr53c8xx> for more
+ Please read <file:Documentation/scsi/ncr53c8xx.txt> for more
information.
CONFIG_SCSI_NCR53C8XX_SYNC
@@ -856,8 +857,8 @@
CONFIG_SCSI_IN2000
This is support for an ISA bus SCSI host adapter. You'll find more
- information in <file:drivers/scsi/README.in2000>. If it doesn't work
- out of the box, you may have to change the jumpers for IRQ or
+ information in <file:Documentation/scsi/in2000.txt>. If it doesn't
+ work out of the box, you may have to change the jumpers for IRQ or
address selection.
If you want to compile this as a module ( = code which can be
@@ -937,7 +938,7 @@
SCSI support"), below.
Information about this driver is contained in
- <file:drivers/scsi/README.qlogicfas>. You should also read the
+ <file:Documentation/scsi/qlogicfas.txt>. You should also read the
SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
@@ -954,7 +955,7 @@
If you say Y here, make sure to choose "BIOS" at the question "PCI
access mode".
- Please read the file <file:drivers/scsi/README.qlogicisp>. You
+ Please read the file <file:Documentation/scsi/qlogicisp.txt>. You
should also read the SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
@@ -1133,7 +1134,7 @@
chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
PCscsi/PCnet (Am53/79C974) solutions.
- Documentation can be found in <file:drivers/scsi/README.tmscsim>.
+ Documentation can be found in <file:Documentation/scsi/tmscsim.txt>.
Note that this driver does NOT support Tekram DC390W/U/F, which are
based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
@@ -1150,7 +1151,7 @@
EEPROM to get initial values for its settings, such as speed,
termination, etc. If it can't find this EEPROM, it will use
defaults or the user supplied boot/module parameters. For details
- on driver configuration see <file:drivers/scsi/README.tmscsim>.
+ on driver configuration see <file:Documentation/scsi/tmscsim.txt>.
If you say Y here and if no EEPROM is found, the driver gives up and
thus only supports Tekram DC390(T) adapters. This can be useful if
@@ -1161,7 +1162,7 @@
CONFIG_SCSI_AM53C974
This is support for the AM53/79C974 SCSI host adapters. Please read
- <file:drivers/scsi/README.AM53C974> for details. Also, the
+ <file:Documentation/scsi/AM53C974.txt> for details. Also, the
SCSI-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, is for you.
@@ -1210,8 +1211,8 @@
newer drives)", below.
For more information about this driver and how to use it you should
- read the file <file:drivers/scsi/README.ppa>. You should also read
- the SCSI-HOWTO, which is available from
+ read the file <file:Documentation/scsi/ppa.txt>. You should also
+ read the SCSI-HOWTO, which is available from
<http://www.linuxdoc.org/docs.html#howto>. If you use this driver,
you will still be able to use the parallel port for other tasks,
such as a printer; it is safe to compile both drivers into the
@@ -1236,8 +1237,8 @@
here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
For more information about this driver and how to use it you should
- read the file <file:drivers/scsi/README.ppa>. You should also read
- the SCSI-HOWTO, which is available from
+ read the file <file:Documentation/scsi/ppa.txt>. You should also
+ read the SCSI-HOWTO, which is available from
<http://www.linuxdoc.org/docs.html#howto>. If you use this driver,
you will still be able to use the parallel port for other tasks,
such as a printer; it is safe to compile both drivers into the
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/FlashPoint.c linux-2.5.7-scsi-doc/drivers/scsi/FlashPoint.c
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/FlashPoint.c Tue Mar 19 11:21:45 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/FlashPoint.c Tue Mar 19 10:53:49 2002
@@ -11,7 +11,8 @@
Copyright 1995-1996 by Mylex Corporation. All Rights Reserved
This file is available under both the GNU General Public License
- and a BSD-style copyright; see LICENSE.FlashPoint for details.
+ and a BSD-style copyright; see Documentation/scsi/LICENSE.FlashPoint for
+ details.
*/
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/aha152x.c linux-2.5.7-scsi-doc/drivers/scsi/aha152x.c
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/aha152x.c Tue Mar 19 11:21:45 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/aha152x.c Tue Mar 19 14:34:26 2002
@@ -211,7 +211,7 @@
*
**************************************************************************
- see README.aha152x for configuration details
+ see Documentation/scsi/aha152x.txt for configuration details
**************************************************************************/
@@ -1834,7 +1834,7 @@
"aha152x: unable to verify geometry for disk with >1GB.\n"
" Using default translation. Please verify yourself.\n"
" Perhaps you need to enable extended translation in the driver.\n"
- " See /usr/src/linux/drivers/scsi/README.aha152x for details.\n");
+ " See /usr/src/linux/Documentation/scsi/aha152x.txt for details.\n");
}
} else {
info_array[0] = info[0];
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/aic7xxx/aic7xxx_linux.c linux-2.5.7-scsi-doc/drivers/scsi/aic7xxx/aic7xxx_linux.c
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/aic7xxx/aic7xxx_linux.c Tue Mar 19 11:21:45 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/aic7xxx/aic7xxx_linux.c Tue Mar 19 14:37:19 2002
@@ -1076,7 +1076,7 @@
aic7xxx_setup(aic7xxx);
if (dummy_buffer[0] != 'P')
printk(KERN_WARNING
-"aic7xxx: Please read the file /usr/src/linux/drivers/scsi/README.aic7xxx\n"
+"aic7xxx: Please read the file /usr/src/linux/Documentation/scsi/aic7xxx.txt\n"
"aic7xxx: to see the proper way to specify options to the aic7xxx module\n"
"aic7xxx: Specifically, don't use any commas when passing arguments to\n"
"aic7xxx: insmod or else it might trash certain memory areas.\n");
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/aic7xxx_old.c linux-2.5.7-scsi-doc/drivers/scsi/aic7xxx_old.c
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/aic7xxx_old.c Tue Mar 19 11:21:46 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/aic7xxx_old.c Tue Mar 19 14:37:57 2002
@@ -9487,8 +9487,8 @@
if(aic7xxx)
aic7xxx_setup(aic7xxx);
if(dummy_buffer[0] != 'P')
- printk(KERN_WARNING "aic7xxx: Please read the file /usr/src/linux/drivers"
- "/scsi/README.aic7xxx\n"
+ printk(KERN_WARNING "aic7xxx: Please read the file /usr/src/linux"
+ "Documentation/scsi/aic7xxx_old.txt\n"
"aic7xxx: to see the proper way to specify options to the aic7xxx "
"module\n"
"aic7xxx: Specifically, don't use any commas when passing arguments to\n"
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/dpt/dpti_ioctl.h linux-2.5.7-scsi-doc/drivers/scsi/dpt/dpti_ioctl.h
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/dpt/dpti_ioctl.h Tue Mar 19 11:21:45 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/dpt/dpti_ioctl.h Tue Mar 19 14:40:06 2002
@@ -5,7 +5,8 @@
copyright : (C) 2001 by Adaptec
email : deanna_bonds@adaptec.com
- See README.dpti for history, notes, license info, and credits
+ See Documentation/scsi/dpti.txt for history, notes, license info and
+ credits
***************************************************************************/
/***************************************************************************
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/dpt_i2o.c linux-2.5.7-scsi-doc/drivers/scsi/dpt_i2o.c
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/dpt_i2o.c Tue Mar 19 11:21:45 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/dpt_i2o.c Tue Mar 19 14:39:27 2002
@@ -8,7 +8,8 @@
July 30, 2001 First version being submitted
for inclusion in the kernel. V2.4
- See README.dpti for history, notes, license info, and credits
+ See Documentation/scsi/dpti.txt for history, notes, license info and
+ credits
***************************************************************************/
/***************************************************************************
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/dpti.h linux-2.5.7-scsi-doc/drivers/scsi/dpti.h
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/dpti.h Tue Mar 19 11:21:45 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/dpti.h Tue Mar 19 14:39:11 2002
@@ -5,7 +5,8 @@
copyright : (C) 2001 by Adaptec
email : deanna_bonds@adaptec.com
- See README.dpti for history, notes, license info, and credits
+ See Documentation/scsi/dpti.txt for history, notes, license info and
+ credits
***************************************************************************/
/***************************************************************************
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/ibmmca.c linux-2.5.7-scsi-doc/drivers/scsi/ibmmca.c
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/ibmmca.c Tue Mar 19 11:21:45 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/ibmmca.c Tue Mar 19 14:57:34 2002
@@ -4,8 +4,8 @@
Copyright (c) 1995 Strom Systems, Inc. under the terms of the GNU
General Public License. Written by Martin Kolinek, December 1995.
Further development by: Chris Beauregard, Klaus Kudielka, Michael Lang
- See the file README.ibmmca for a detailed description of this driver,
- the commandline arguments and the history of its development.
+ See the file Documentation/scsi/ibmmca.txt for a detailed description of
+ this driver, the commandline arguments and the history of its development.
See the WWW-page: http://www.uni-mainz.de/~langm000/linux.html for latest
updates, info and ADF-files for adapters supported by this driver.
*/
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/ibmmca.h linux-2.5.7-scsi-doc/drivers/scsi/ibmmca.h
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/ibmmca.h Tue Mar 19 11:21:45 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/ibmmca.h Tue Mar 19 15:15:26 2002
@@ -1,8 +1,9 @@
/*
* Low Level Driver for the IBM Microchannel SCSI Subsystem
- * (Headerfile, see README.ibmmca for description of the IBM MCA SCSI-driver
- * For use under the GNU General Public License within the Linux-kernel project.
- * This include file works only correctly with kernel 2.4.0 or higher!!! */
+ * (Headerfile, see Documentation/scsi/ibmmca.txt for description of the
+ * IBM MCA SCSI-driver For use under the GNU General Public License within
+ * the Linux-kernel project. This include file works only correctly with
+ * kernel 2.4.0 or higher!!! */
#ifndef _IBMMCA_H
#define _IBMMCA_H
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/ncr53c8xx.c linux-2.5.7-scsi-doc/drivers/scsi/ncr53c8xx.c
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/ncr53c8xx.c Tue Mar 19 11:21:46 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/ncr53c8xx.c Tue Mar 19 15:15:48 2002
@@ -1625,7 +1625,7 @@
** Possible data corruption during Memory Write and Invalidate.
** This work-around resets the addressing logic prior to the
** start of the first MOVE of a DATA IN phase.
- ** (See README.ncr53c8xx for more information)
+ ** (See Documentation/scsi/ncr53c8xx.txt for more information)
*/
SCR_JUMPR ^ IFFALSE (IF (SCR_DATA_IN)),
20,
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/osst.c linux-2.5.7-scsi-doc/drivers/scsi/osst.c
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/osst.c Tue Mar 19 11:21:46 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/osst.c Tue Mar 19 14:58:07 2002
@@ -1,6 +1,6 @@
/*
SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
- file README.st for more information.
+ file Documentation/scsi/st.txt for more information.
History:
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/qla1280.c linux-2.5.7-scsi-doc/drivers/scsi/qla1280.c
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/qla1280.c Tue Mar 19 11:21:46 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/qla1280.c Tue Mar 19 14:59:28 2002
@@ -776,8 +776,8 @@
if(options)
qla1280_setup(options, NULL);
if(dummy_buffer[0] != 'P')
- printk(KERN_WARNING "qla1280: Please read the file /usr/src/linux/drivers"
- "/scsi/README.qla1280\n"
+ printk(KERN_WARNING "qla1280: Please read the file /usr/src/linux"
+ "/Documentation/scsi/qla1280.txt\n"
"qla1280: to see the proper way to specify options to the qla1280 "
"module\n"
"qla1280: Specifically, don't use any commas when passing arguments to\n"
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/st.c linux-2.5.7-scsi-doc/drivers/scsi/st.c
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/st.c Tue Mar 19 11:21:45 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/st.c Tue Mar 19 14:59:57 2002
@@ -1,6 +1,6 @@
/*
SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
- file README.st for more information.
+ file Documentation/scsi/st.txt for more information.
History:
Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
@@ -3638,7 +3638,7 @@
}
#ifndef MODULE
-/* Set the boot options. Syntax is defined in README.st.
+/* Set the boot options. Syntax is defined in Documentation/scsi/st.txt.
*/
static int __init st_setup(char *str)
{
diff -Naur linux-2.5.7-scsi-doc-moved/drivers/scsi/tmscsim.c linux-2.5.7-scsi-doc/drivers/scsi/tmscsim.c
--- linux-2.5.7-scsi-doc-moved/drivers/scsi/tmscsim.c Tue Mar 19 11:21:46 2002
+++ linux-2.5.7-scsi-doc/drivers/scsi/tmscsim.c Tue Mar 19 15:03:03 2002
@@ -5,7 +5,8 @@
* Bus Master Host Adapter *
* (C)Copyright 1995-1996 Tekram Technology Co., Ltd. *
***********************************************************************/
-/* (C) Copyright: put under GNU GPL in 10/96 (see README.tmscsim) *
+/* (C) Copyright: put under GNU GPL in 10/96 *
+ * (see Documentation/scsi/tmscsim.txt) *
*************************************************************************/
/* $Id: tmscsim.c,v 2.60.2.30 2000/12/20 01:07:12 garloff Exp $ */
/* Enhancements and bugfixes by *
@@ -1523,7 +1524,7 @@
DC390_write32 (DMA_ScsiBusCtrl, EN_INT_ON_PCI_ABORT);
PDEVSET1; PCI_READ_CONFIG_WORD(PDEV, PCI_STATUS, &pstat);
printk ("DC390: Register dump: PCI Status: %04x\n", pstat);
- printk ("DC390: In case of driver trouble read linux/drivers/scsi/README.tmscsim\n");
+ printk ("DC390: In case of driver trouble read linux/Documentation/scsi/tmscsim.txt\n");
};
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Mar 31 2002 - 22:00:09 EST