On Mon, 25 Feb 2002, Manohar Pradhan wrote:
> Hi All,
>
> If the Hard Drive is died, means I will need to replace. I have backup
> for the Data in that /www partition.
>
> Means when I replace new HDD, I will have to partition/format using
> fdisk /sda ?
>
> >From my partition info,
>
> /dev/sdb6 917072 732972 137516 84% /
> /dev/sda1 18820 5811 12037 33% /boot
> /dev/sda6 2218336 462492 1643156 22% /www
> /dev/sda5 5297560 418936 4609520 8% /home
> /dev/sda7 1210440 711516 437436 62% /software
> /dev/sdb1 5550188 50896 5217356 1% /usr
> /dev/sdb5 2016016 28572 1885032 1% /var
>
>
> My problematic HDD is /sda so if I replace this HDD, how can I boot as
> boot images are in /sda1 /boot partition. How can I copy this boot
> images to somewhere and make it work and what will be the process?
>
> I know if I reboot and replace the HDD, it will give problem while
> booting, any Idea to struggle with this?
>
> Thanks a lot for all your help.
>
> Regards
> Manohar
>
>
Simple. This assumes your boot drive (/dev/sda) is still readable.
(1) Comment out (in /etc/fstab) everything that mounts anything you
don't need for the basic system. This is just to simplify things
when you are working.
(2) Make a floppy disk that boots linux and uses the current root
file-system (man rdev). If you don't need modules to boot it's just
`cp /boot/vmlinuz-whatever-rev-is /dev/fd0`
`rdev /dev/fd0 /dev/sdb6`
Boot, using your floppy, to make certain your system comes up okay.
(3) Shut down and install your new SCSI disk as the next highest
SCSI device number. This will make it /dev/sdc because you have
/dev/sda and /dev/sdb.
(4) Reboot. Your new SCSI disk will be /dev/sdc.
(5) Using fdisk, partition it like /dev/sda, the one you are
replacing.
(6) `mkfs` on each partition.
(7) Mount each partition, one at a time, off from /mnt and tar
your files to it like:
mount /dev/sdc1 /mnt # will be /boot
cd /boot
tar -clf - . | (cd /mnt; tar -xvpf -)
umount/mnt
Do this for each parition.
(8) Shut down, and change the SCSI address of /dev/sdc to the address
of the drive you are replacing /dev/sda (change to device 0). Remove
the bad drive.
(9) Reboot using the floppy.
(10) Execute lilo, this will make the new drive bootable.
(11) Un-comment /etc/fstab stuff.
(12) Execute mount -a
Done, remove floppy and reboot.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.1 on an i686 machine (797.90 BogoMips).
111,111,111 * 111,111,111 = 12,345,678,987,654,321
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 28 2002 - 21:00:18 EST