On Thu, 21 Feb 2002, Mike Fedyk wrote:
> Is that because one of the connector holes is blocked on the cable conector?
>
> If so, I have had success with just breaking the correct pin so that the 80
> pin cable can be plugged into old motherboard IDE connectors. As always
> with hardware mods, YMMV.
But if I use the old motherboard IDE connector I'll not be using
DMA66, so no need to use those new cables if I have a chunk of the other
cables... (even if I agree that hardware mods are possible, I avoid them
while I can)
Thanks,
Cesar Suga <sartre@linuxbr.com>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Feb 23 2002 - 21:00:39 EST