Hi,
Trying to get a Minolta dimage scan dual (photo scanner) using an
Adaptec AHA-2940 Ultra scsi controller gave the following error:
Feb 4 22:30:27 rim kernel: PCI: Found IRQ 5 for device 00:0a.0
Feb 4 22:30:27 rim kernel: scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
Feb 4 22:30:27 rim kernel: <Adaptec 2940 SCSI adapter>
Feb 4 22:30:27 rim kernel: aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
Feb 4 22:30:27 rim kernel:
Feb 4 22:30:43 rim kernel: scsi2: brkadrint, Scratch or SCB Memory Parity Error at seqaddr = 0x1
Feb 4 22:30:43 rim kernel: scsi2: Dumping Card State while idle, at SEQADDR 0x1
Feb 4 22:30:43 rim kernel: ACCUM = 0x3, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
Feb 4 22:30:43 rim kernel: HCNT = 0x0
Feb 4 22:30:43 rim kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
Feb 4 22:30:43 rim kernel: DFCNTRL = 0x4, DFSTATUS = 0x6d
Feb 4 22:30:43 rim kernel: LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
Feb 4 22:30:43 rim kernel: SSTAT0 = 0x5, SSTAT1 = 0x0
Feb 4 22:30:43 rim kernel: STACK == 0x17, 0x186, 0x0, 0x0
Feb 4 22:30:43 rim kernel: SCB count = 4
Feb 4 22:30:43 rim kernel: Kernel NEXTQSCB = 2
Feb 4 22:30:43 rim kernel: Card NEXTQSCB = 2
Feb 4 22:30:43 rim kernel: QINFIFO entries:
Feb 4 22:30:43 rim kernel: Waiting Queue entries:
Feb 4 22:30:43 rim kernel: Disconnected Queue entries:
Feb 4 22:30:43 rim kernel: QOUTFIFO entries:
Feb 4 22:30:43 rim kernel: Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Feb 4 22:30:43 rim kernel: Pending list:
Feb 4 22:30:43 rim kernel: Kernel Free SCB list: 3 1 0
Feb 4 22:30:49 rim kernel: scsi2:0:1:0: Attempting to queue an ABORT message
Feb 4 22:30:49 rim kernel: scsi2: Dumping Card State while idle, at SEQADDR 0x18
Feb 4 22:30:49 rim kernel: ACCUM = 0x0, SINDEX = 0x0, DINDEX = 0x0, ARG_2 = 0x0
Feb 4 22:30:49 rim kernel: HCNT = 0x0
Feb 4 22:30:49 rim kernel: SCSISEQ = 0x0, SBLKCTL = 0xc0
Feb 4 22:30:49 rim kernel: DFCNTRL = 0x0, DFSTATUS = 0x29
Feb 4 22:30:49 rim kernel: LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x0
Feb 4 22:30:49 rim kernel: SSTAT0 = 0x0, SSTAT1 = 0x8
Feb 4 22:30:49 rim kernel: STACK == 0x17, 0x0, 0x0, 0x0
Feb 4 22:30:49 rim kernel: SCB count = 4
Feb 4 22:30:49 rim kernel: Kernel NEXTQSCB = 3
Feb 4 22:30:49 rim kernel: Card NEXTQSCB = 0
Feb 4 22:30:49 rim kernel: QINFIFO entries: 3 2
Feb 4 22:30:49 rim kernel: Waiting Queue entries: 0:255 1:255 2:255 3:255 4:255 5:255 6:255 7:255 8:255 9:255 10:255 11:255 12:255 13:255 14:255 15:255
Feb 4 22:30:49 rim kernel: Disconnected Queue entries: 0:255 1:255 2:255 3:255 4:255 5:255 6:255 7:255 8:255 9:255 10:255 11:255 12:255 13:255 14:255 15:255
Feb 4 22:30:49 rim kernel: QOUTFIFO entries:
Feb 4 22:30:49 rim kernel: Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Feb 4 22:30:49 rim kernel: Pending list: 2
Feb 4 22:30:49 rim kernel: Kernel Free SCB list: 1 0
Feb 4 22:30:49 rim kernel: Untagged Q(1): 2
Feb 4 22:30:49 rim kernel: DevQ(0:1:0): 0 waiting
Feb 4 22:30:49 rim kernel: qinpos = 0, SCB index = 3
Feb 4 22:30:49 rim kernel: Kernel panic: Loop 1
Feb 4 22:30:49 rim kernel:
This is on liunx-2.4.18-pre7-ac3.
The scanner is the only device on the scsi controller.
>From above I don't know if this really has to do with the scanner
or if it is the contrller itself, but during boot of the system
the scanner is seen by the 2940...
-Marcel
--
======-------- Marcel J.E. Mol MESA Consulting B.V.
=======--------- ph. +31-(0)6-54724868 P.O. Box 112
=======--------- marcel@mesa.nl 2630 AC Nootdorp
__==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands ____
They couldn't think of a number, Linux user 1148 -- counter.li.org
so they gave me a name! -- Rupert Hine -- www.ruperthine.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 07 2002 - 21:00:38 EST