Re: 2.4.16 with es1370 pci

From: Wakko Warner (wakko@animx.eu.org)
Date: Sat Feb 02 2002 - 15:37:42 EST


> > used the 2nd dsp on this card since this boot, but I know it works since I
> > used it the last boot. When the first quits, they both are gone. But
> > seeing how no interrupts are being delivered, makes sense (see below)
>
> Boot withg the "noapic" option. Quite how your system has managed to
> lose an interrupt in the APIC hardware I don't know, but the APIC's
> certainly have bugs. It could also be an edge/level trigger but if the BIOS
> confused it because IRQ15 was for some kind of IDE device, but I see no
> evidence of that.
>
> If it happens with APIC disabled ("noapic") then the second option might
> be worth investigating.

It's been a while since I've added more to this.

so far, alan, noapic has kept my es1370 card working w/o problems. Any clue
why it doesn't work when apic is used? It will usually stop working during
play and will not work again until a reboot. (I don't even need to
hardreset the system)

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Feb 07 2002 - 21:00:24 EST