Hello,
sis5513.c is finally working here accross several cold/warm reboots. The
system is now running md5sum over huge files in UDMA 5 transfer mode
simultaneously on 2 drives without error for the last hour.
If you want (sis ide and ATA/100 -> you want) to test it, apply the
attached diff (done against 2.4.17, ask me if you want a patch against
another version) or
copy
http://gyver.homeip.net/sis5513.c
to your [linux-src]/drivers/ide directory
Please report any success/failure. In case of failure, please send me
your kernel SIS5513 boot messages.
As usual, you should backup your data before using this driver, ...
LB.
--- linux-orig/drivers/ide/sis5513.c Fri Sep 7 18:28:38 2001
+++ linux/drivers/ide/sis5513.c Mon Dec 31 00:06:45 2001
@@ -37,8 +37,11 @@
#define SIS5513_FLAG_ATA_16 0x00000001
#define SIS5513_FLAG_ATA_33 0x00000002
#define SIS5513_FLAG_ATA_66 0x00000004
+#define SIS5513_FLAG_ATA_100 0x00000008
#define SIS5513_FLAG_LATENCY 0x00000010
+static unsigned int capabilities = 0x00000000;
+
static const struct {
const char *name;
unsigned short host_id;
@@ -48,15 +51,15 @@
{ "SiS540", PCI_DEVICE_ID_SI_540, SIS5513_FLAG_ATA_66, },
{ "SiS620", PCI_DEVICE_ID_SI_620, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS630", PCI_DEVICE_ID_SI_630, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS635", PCI_DEVICE_ID_SI_635, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
+ { "SiS635", PCI_DEVICE_ID_SI_635, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
{ "SiS640", PCI_DEVICE_ID_SI_640, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS645", PCI_DEVICE_ID_SI_645, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS650", PCI_DEVICE_ID_SI_650, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS730", PCI_DEVICE_ID_SI_730, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS735", PCI_DEVICE_ID_SI_735, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS740", PCI_DEVICE_ID_SI_740, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS745", PCI_DEVICE_ID_SI_745, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
- { "SiS750", PCI_DEVICE_ID_SI_750, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
+ { "SiS645", PCI_DEVICE_ID_SI_645, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS650", PCI_DEVICE_ID_SI_650, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS730", PCI_DEVICE_ID_SI_730, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS735", PCI_DEVICE_ID_SI_735, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS740", PCI_DEVICE_ID_SI_740, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS745", PCI_DEVICE_ID_SI_745, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
+ { "SiS750", PCI_DEVICE_ID_SI_750, SIS5513_FLAG_ATA_100|SIS5513_FLAG_LATENCY, },
{ "SiS5591", PCI_DEVICE_ID_SI_5591, SIS5513_FLAG_ATA_33, },
{ "SiS5597", PCI_DEVICE_ID_SI_5597, SIS5513_FLAG_ATA_33, },
{ "SiS5600", PCI_DEVICE_ID_SI_5600, SIS5513_FLAG_ATA_33, },
@@ -148,6 +151,17 @@
"6 PCICLK", "12 PCICLK"
};
+static char* cycle_time_ata100[] = {
+ "Reserved", "2 CLK",
+ "3 CLK", "4 CLK",
+ "5 CLK", "6 CLK",
+ "7 CLK", "8 CLK",
+ "9 CLK", "10 CLK",
+ "11 CLK", "12 CLK",
+ "Reserved", "Reserved",
+ "Reserved", "Reserved"
+};
+
static int sis_get_info (char *buffer, char **addr, off_t offset, int count)
{
int rc;
@@ -189,11 +203,19 @@
p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n",
(reg & 0x80) ? "Enabled" : "Disabled",
(reg1 & 0x80) ? "Enabled" : "Disabled");
- p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n",
- cycle_time[(reg & 0x70) >> 4], cycle_time[(reg1 & 0x70) >> 4]);
- p += sprintf(p, " Data Active Time %s \t Data Active Time %s\n",
- active_time[(reg & 0x07)], active_time[(reg1 &0x07)] );
-
+ if (capabilities && SIS5513_FLAG_ATA_100) {
+ p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n",
+ cycle_time_ata100[reg & 0x0F], cycle_time_ata100[reg1 & 0x0F]);
+ rc = pci_read_config_byte(bmide_dev, 0x40, ®);
+ rc = pci_read_config_byte(bmide_dev, 0x44, ®1);
+ p += sprintf(p, " Data Active Time %s \t Data Active Time %s\n",
+ active_time[(reg & 0x70) >> 4], active_time[(reg1 & 0x70) >> 4]);
+ } else {
+ p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n",
+ cycle_time[(reg & 0x70) >> 4], cycle_time[(reg1 & 0x70) >> 4]);
+ p += sprintf(p, " Data Active Time %s \t Data Active Time %s\n",
+ active_time[(reg & 0x07)], active_time[(reg1 &0x07)] );
+ }
rc = pci_read_config_byte(bmide_dev, 0x40, ®);
rc = pci_read_config_byte(bmide_dev, 0x44, ®1);
p += sprintf(p, " Data Recovery Time %s \t Data Recovery Time %s\n",
@@ -213,10 +235,19 @@
p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n",
(reg & 0x80) ? "Enabled" : "Disabled",
(reg1 & 0x80) ? "Enabled" : "Disabled");
- p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n",
- cycle_time[(reg & 0x70) >> 4], cycle_time[(reg1 & 0x70) >> 4]);
- p += sprintf(p, " Data Active Time %s \t Data Active Time %s\n",
- active_time[(reg & 0x07)], active_time[(reg1 &0x07)] );
+ if (capabilities && SIS5513_FLAG_ATA_100) {
+ p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n",
+ cycle_time_ata100[reg & 0x0F], cycle_time_ata100[reg1 & 0x0F]);
+ rc = pci_read_config_byte(bmide_dev, 0x42, ®);
+ rc = pci_read_config_byte(bmide_dev, 0x46, ®1);
+ p += sprintf(p, " Data Active Time %s \t Data Active Time %s\n",
+ active_time[(reg & 0x70) >> 4], active_time[(reg1 & 0x70) >> 4]);
+ } else {
+ p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n",
+ cycle_time[(reg & 0x70) >> 4], cycle_time[(reg1 & 0x70) >> 4]);
+ p += sprintf(p, " Data Active Time %s \t Data Active Time %s\n",
+ active_time[(reg & 0x07)], active_time[(reg1 &0x07)] );
+ }
rc = pci_read_config_byte(bmide_dev, 0x42, ®);
rc = pci_read_config_byte(bmide_dev, 0x46, ®1);
@@ -229,6 +260,7 @@
byte sis_proc = 0;
extern char *ide_xfer_verbose (byte xfer_rate);
+/* Enables Prefetch and Postwrite on drive */
static void config_drive_art_rwp (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
@@ -243,8 +275,10 @@
if ((reg4bh & rw_prefetch) != rw_prefetch)
pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
+ printk("SIS5513: config_drive_art_rwp, drive %d\n", drive->dn);
}
+/* Set active and recovery time */
static void config_art_rwp_pio (ide_drive_t *drive, byte pio)
{
ide_hwif_t *hwif = HWIF(drive);
@@ -274,6 +308,8 @@
timing = (xfer_pio >= pio) ? xfer_pio : pio;
+ printk("SIS5513: config_drive_art_rwp_pio, drive %d, pio %d, timing %d\n",
+ drive->dn, pio, timing);
/*
* Mode 0 Mode 1 Mode 2 Mode 3 Mode 4
* Active time 8T (240ns) 6T (180ns) 4T (120ns) 3T (90ns) 3T (90ns)
@@ -291,6 +327,19 @@
default: return;
}
+ if (capabilities && SIS5513_FLAG_ATA_100) {
+ switch(timing) { /* active recovery
+ v v */
+ case 4: test1 = 0x30|0x01; break;
+ case 3: test1 = 0x30|0x03; break;
+ case 2: test1 = 0x40|0x04; break;
+ case 1: test1 = 0x60|0x07; break;
+ default: break;
+ }
+ pci_write_config_byte(dev, drive_pci, test1);
+ return; /* temporary hack for tests */
+ }
+
pci_read_config_byte(dev, drive_pci, &test1);
pci_read_config_byte(dev, drive_pci|0x01, &test2);
@@ -298,8 +347,8 @@
* Do a blanket clear of active and recovery timings.
*/
- test1 &= ~0x07;
- test2 &= ~0x0F;
+ test1 &= ~0x0F;
+ test2 &= ~0x07;
switch(timing) {
case 4: test1 |= 0x01; test2 |= 0x03; break;
@@ -340,6 +389,9 @@
byte drive_pci, test1, test2;
byte unmask, four_two, mask = 0;
+ printk("SIS5513: sis5513_tune_chipset, drive %d, speed %d\n",
+ drive->dn, speed);
+
if (host_dev) {
switch(host_dev->device) {
case PCI_DEVICE_ID_SI_530:
@@ -379,6 +431,7 @@
pci_read_config_byte(dev, drive_pci, &test1);
pci_read_config_byte(dev, drive_pci|0x01, &test2);
+ /* If not an UDMA mode switch off udma bit */
if ((speed <= XFER_MW_DMA_2) && (test2 & 0x80)) {
pci_write_config_byte(dev, drive_pci|0x01, test2 & ~0x80);
pci_read_config_byte(dev, drive_pci|0x01, &test2);
@@ -386,7 +439,31 @@
pci_write_config_byte(dev, drive_pci|0x01, test2 & ~unmask);
}
- switch(speed) {
+ if (capabilities & SIS5513_FLAG_ATA_100) {
+ switch(speed) {
+#ifdef CONFIG_BLK_DEV_IDEDMA
+ case XFER_UDMA_5: mask = 0x01; break;
+ case XFER_UDMA_4: mask = 0x02; break;
+ case XFER_UDMA_3: mask = 0x04; break;
+ case XFER_UDMA_2: mask = 0x05; break;
+ case XFER_UDMA_1: mask = 0x07; break;
+ case XFER_UDMA_0: mask = 0x0B; break;
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_MW_DMA_0:
+ case XFER_SW_DMA_2:
+ case XFER_SW_DMA_1:
+ case XFER_SW_DMA_0: break;
+#endif /* CONFIG_BLK_DEV_IDEDMA */
+ case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4));
+ case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3));
+ case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2));
+ case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
+ case XFER_PIO_0:
+ default: return((int) config_chipset_for_pio(drive, 0));
+ }
+ } else {
+ switch(speed) {
#ifdef CONFIG_BLK_DEV_IDEDMA
case XFER_UDMA_5: mask = 0x80; break;
case XFER_UDMA_4: mask = 0x90; break;
@@ -407,10 +484,16 @@
case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
case XFER_PIO_0:
default: return((int) config_chipset_for_pio(drive, 0));
+ }
}
- if (speed > XFER_MW_DMA_2)
- pci_write_config_byte(dev, drive_pci|0x01, test2|mask);
+ if (speed > XFER_MW_DMA_2) {
+ if (capabilities & SIS5513_FLAG_ATA_100) {
+ pci_write_config_byte(dev, drive_pci|0x01, 0x80|mask);
+ } else {
+ pci_write_config_byte(dev, drive_pci|0x01, test2|mask);
+ }
+ }
drive->current_speed = speed;
return ((int) ide_config_drive_speed(drive, speed));
@@ -437,6 +520,9 @@
byte udma_66 = eighty_ninty_three(drive);
byte ultra_100 = 0;
+ printk("SIS5513: config_chipset_for_dma, drive %d, ultra %d\n",
+ drive->dn, ultra);
+
if (host_dev) {
switch(host_dev->device) {
case PCI_DEVICE_ID_SI_635:
@@ -583,6 +669,7 @@
continue;
host_dev = host;
+ capabilities = SiSHostChipInfo[i].flags;
printk(SiSHostChipInfo[i].name);
printk("\n");
if (SiSHostChipInfo[i].flags & SIS5513_FLAG_LATENCY) {
@@ -592,12 +679,22 @@
}
if (host_dev) {
- byte reg52h = 0;
+ if (capabilities & SIS5513_FLAG_ATA_100) {
+ byte reg49h = 0;
- pci_read_config_byte(dev, 0x52, ®52h);
- if (!(reg52h & 0x04)) {
- /* set IDE controller to operate in Compabitility mode only */
- pci_write_config_byte(dev, 0x52, reg52h|0x04);
+ pci_read_config_byte(dev, 0x49, ®49h);
+ if (!(reg49h & 0x01)) {
+ /* set IDE controller to operate in Compabitility mode only */
+ pci_write_config_byte(dev, 0x49, reg49h|0x01);
+ }
+ } else {
+ byte reg52h = 0;
+
+ pci_read_config_byte(dev, 0x52, ®52h);
+ if (!(reg52h & 0x04)) {
+ /* set IDE controller to operate in Compabitility mode only */
+ pci_write_config_byte(dev, 0x52, reg52h|0x04);
+ }
}
#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS)
if (!sis_proc) {
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Dec 31 2001 - 21:00:23 EST