PROBLEM: system hangs on dual 1GHz PIII system with 2.4.13-ac8
Full Description:
This system has frequent lockups. Lockups used to occur every few days
or as infrequently as once per two weeks. That was with the early 2.4.x
kernels. Since moving to the latest stable ac-series kernel, the kernel
stayed up two weeks (to the day) before the system hung.
Keywords: SMP, Dual CPU PIII, kernel hang, Paging Request, Virtual Address
Kernel version (from /proc/version):
Linux version 2.4.13-ac8 (root@willscarlet) (gcc version 2.96 20000731
(Red Hat Linux 7.1 2.96-98)) #2 SMP Mon Nov 19 16:05:19 EST 2001
Oops output run through ksymoops:
ksymoops 2.4.1 on i686 2.4.13-ac8. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.13-ac8/ (default)
-m /boot/System.map-2.4.13-ac8 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Unable to handle kernel paging request at virtual address 810426b4
c0112995
*pde = 00000000
Oops: 0002
CPU: 1
EIP: 0010:[smp_apic_timer_interrupt+21/272] Not tainted
EIP: 0010:[<c0112995>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010046
eax: 3036342d ebx: 00000000 ecx: 000002df edx: e5027af8
esi: 3036342d edi: 080d6fec ebp: c2c8c31c esp: e5027ad0
ds: 0018 es: 0018 ss: 0018
Process mvall (pid: 21006, stackpage=e5026000)
Stack: d67cb720 bffff9bc bffff6e8 00000b5c 00001000 fe00a484 080d6fec
c2c8c31c
c010b491 e5027af8 00001000 000002df e5027ba0 fe00a484 080d6fec
c2c8c31c
00000000 00000018 fe000018 ffffffef c0128d20 00000010 00010206
00000001
Call Trace: [call_apic_timer_interrupt+5/16] [file_read_actor+112/224]
[do_generic_file_read+550/1216] [generic_file_read+94/128]
[file_read_actor+0/224]
Call Trace: [<c010b491>] [<c0128d20>] [<c0128a16>] [<c0128dee>]
[<c0128cb0>]
[<c0136e46>] [<c0106f1b>] [<c0106f1b>] [<c01173b4>] [<c011ad2a>]
[<c0136989>]
[<c012701f>] [<c0106f1b>] [<c0136989>] [<c012701f>] [<c0106f1b>]
[<c0106f1b>]
Code: ff 04 b5 00 56 2b c0 c1 e0 05 89 1d b0 e0 ff ff ff 80 24 b5
>>EIP; c0112995 <smp_apic_timer_interrupt+15/110> <=====
Trace; c010b491 <call_apic_timer_interrupt+5/10>
Trace; c0128d20 <file_read_actor+70/e0>
Trace; c0128a16 <do_generic_file_read+226/4c0>
Trace; c0128dee <generic_file_read+5e/80>
Trace; c0128cb0 <file_read_actor+0/e0>
Trace; c0136e46 <sys_read+96/d0>
Trace; c0106f1b <system_call+2f/34>
Trace; c0106f1b <system_call+2f/34>
Trace; c01173b4 <__mmdrop+24/30>
Trace; c011ad2a <do_exit+21a/230>
Trace; c0136989 <filp_close+89/a0>
Trace; c012701f <sys_munmap+2f/50>
Trace; c0106f1b <system_call+2f/34>
Trace; c0136989 <filp_close+89/a0>
Trace; c012701f <sys_munmap+2f/50>
Trace; c0106f1b <system_call+2f/34>
Trace; c0106f1b <system_call+2f/34>
Code; c0112995 <smp_apic_timer_interrupt+15/110>
00000000 <_EIP>:
Code; c0112995 <smp_apic_timer_interrupt+15/110> <=====
0: ff 04 b5 00 56 2b c0 incl 0xc02b5600(,%esi,4) <=====
Code; c011299c <smp_apic_timer_interrupt+1c/110>
7: c1 e0 05 shl $0x5,%eax
Code; c011299f <smp_apic_timer_interrupt+1f/110>
a: 89 1d b0 e0 ff ff mov %ebx,0xffffe0b0
Code; c01129a5 <smp_apic_timer_interrupt+25/110>
10: ff 80 24 b5 00 00 incl 0xb524(%eax)
1 warning issued. Results may not be reliable.
Script to reproduce: N/A ... seems to occure randomly, even under light
load.
Environment:
Software (report from ver_linux):
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux willscarlet 2.4.13-ac8 #2 SMP Mon Nov 19 16:05:19 EST 2001 i686
unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11f
mount 2.11g
modutils 2.4.6
e2fsprogs 1.23
PPP 2.4.1
isdn4k-utils 3.1pre1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded eepro100 st ext3 jbd
* This is a Redhat 7.2 system (upgraded from RH 7.1.) The kernel is a
vanilla 2.4.13 kernel with the 2.4.13-ac8 patch applied and then compiled.
The system is a dual CPU -- 1GHz PIII -- Via Apollo Pro chipset based
system with SCSI on the mother board. It has 2GB physical RAM and .5GB
swap space.
Processor information (from /proc/cpuinfo):
WS$more /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 1004.520
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse
bogomips : 2005.40
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 1004.520
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse
bogomips : 2005.40
Module information (from /proc/modules):
WS$cat /proc/modules
eepro100 17408 1
st 26352 0 (unused)
ext3 58192 4 (autoclean)
jbd 38720 4 (autoclean) [ext3]
Loaded driver and hardware information (/proc/ioports, /proc/iomem):
WS$cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
a800-a8ff : Adaptec 7892A
a800-a8ff : aic7xxx
b000-b0ff : LSI Logic / Symbios Logic (formerly NCR) 53c1010 Ultra3 SCSI
Adapter (#2)
b000-b0ff : sym53c8xx
b400-b4ff : LSI Logic / Symbios Logic (formerly NCR) 53c1010 Ultra3 SCSI
Adapter
b400-b4ff : sym53c8xx
b800-b83f : Intel Corporation 82557 [Ethernet Pro 100]
b800-b83f : eepro100
d000-d01f : VIA Technologies, Inc. UHCI USB (#2)
d400-d41f : VIA Technologies, Inc. UHCI USB
d800-d80f : VIA Technologies, Inc. Bus Master IDE
e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
WS$cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000cc7ff : Extension ROM
000d0000-000d65ff : Extension ROM
000f0000-000fffff : System ROM
00100000-7fffbfff : System RAM
00100000-00219640 : Kernel code
00219641-0026dc9f : Kernel data
7fffc000-7fffefff : ACPI Tables
7ffff000-7fffffff : ACPI Non-volatile Storage
ea800000-ea800fff : Adaptec 7892A
ea800000-ea800fff : aic7xxx
eb000000-eb001fff : LSI Logic / Symbios Logic (formerly NCR) 53c1010
Ultra3 SCSI Adapter (#2)
eb800000-eb8003ff : LSI Logic / Symbios Logic (formerly NCR) 53c1010
Ultra3 SCSI Adapter (#2)
ec000000-ec001fff : LSI Logic / Symbios Logic (formerly NCR) 53c1010
Ultra3 SCSI Adapter
ec800000-ec8003ff : LSI Logic / Symbios Logic (formerly NCR) 53c1010
Ultra3 SCSI Adapter
ed000000-ed0fffff : Intel Corporation 82557 [Ethernet Pro 100]
ed800000-ed800fff : Intel Corporation 82557 [Ethernet Pro 100]
ed800000-ed800fff : eepro100
ee000000-efdfffff : PCI Bus #01
ee000000-eeffffff : nVidia Corporation NV15 (Geforce2 Pro)
eff00000-fbffffff : PCI Bus #01
f0000000-f7ffffff : nVidia Corporation NV15 (Geforce2 Pro)
fc000000-fdffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x]
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
PCI information ('lspci -vvv' as root):
WS$lspci -vvv|more
00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev c4)
Subsystem: Asustek Computer, Inc.: Unknown device 8038
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: ee000000-efdfffff
Prefetchable memory behind bridge: eff00000-fbffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
Subsystem: Asustek Computer, Inc.: Unknown device 8038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if
00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 18
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if
00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if
00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 18
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if
00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Management
Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ed800000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b800 [size=64]
Region 2: Memory at ed000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
00:08.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c1010
Ultra3 SCSI Adapter (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at b400 [size=256]
Region 1: Memory at ec800000 (64-bit, non-prefetchable) [size=1K]
Region 3: Memory at ec000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.1 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c1010
Ultra3 SCSI Adapter (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), cache line size 08
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at b000 [size=256]
Region 1: Memory at eb800000 (64-bit, non-prefetchable) [size=1K]
Region 3: Memory at eb000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 SCSI storage controller: Adaptec 7892A (rev 02)
Subsystem: Adaptec: Unknown device e2a0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 19
BIST result: 00
Region 0: I/O ports at a800 [disabled] [size=256]
Region 1: Memory at ea800000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV15 (Geforce2 GTS)
(rev a3) (prog-if 00 [VGA])
Subsystem: LeadTek Research Inc.: Unknown device 2842
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at efff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
SCSI information (from /proc/scsi/scsi):
WS$cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: ARCHIVE Model: Python 04106-XXX Rev: 735B
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: QUANTUM Model: ATLAS10K2-TY367L Rev: DDD6
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 08 Lun: 00
Vendor: IBM Model: DDYS-T36950N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 10 Lun: 00
Vendor: SEAGATE Model: ST118273W Rev: 6244
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 11 Lun: 00
Vendor: IBM Model: DDYS-T36950N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
* Please let me know if there is anything I can do to assist in
troubleshooting, or if you need more information.
Thanks!
Brian (brianm@fsg1.nws.noaa.gov)
This archive was generated by hypermail 2b29 : Fri Dec 07 2001 - 21:00:22 EST