ACPI / APM - Battery level not readable on HP Omnibook XE3

From: Lars Duesing (ld@stud.fh-muenchen.de)
Date: Mon Dec 03 2001 - 04:28:05 EST


Hi List,

I do have some nice problem.
I got a new Omnibook XE3/1066, and wanted to install Linux.
Problems are growing big :)

All information regards to kernel 2.5.0.

One of my Problems is: I cannot read battery-level trough either acpi
nor apm.
On acpi kernel tells me on cat /proc/acpi/battery/1/info:
Present: yes
Design Capacity: 5400 mAh
Last Full Capacity: 5400 mAh
...
Model Number: LIP9071
...
Battery Type: LiON
OEM Info: HP

so far so good.
cat /proc/acpi/battery/1/status:
Present: yes
Error reading battery status (_BST)

ouch.
best thing - next cat /proc/acpi/battery/1/info:
Present: yes
Error reading battery information (_BIF)

double ouch.

Using APM results are more or less the same.

any hints?

thanks

        Lars Duesing

-- 
======================================================================
This mail may contain private and/or confidential information. 
If you are not the intended recipient, please discard this mail 
immediately. Any unauthorized use of the information in this mail is 
prohibited by international law.

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Fri Dec 07 2001 - 21:00:22 EST