On 20011112 Linus Torvalds wrote:
>
>Ok, this kernel hopefully contains all the high-priority merges with Alan,
>which means that as far as that is concerned, I'm done with 2.4.x and
>ready to pass it on to Marcelo.
>
>Which means that I'd also like people to double-check that there are no
>embarrassing missing pieces due to the merge (or other patches).
>
This is an update-cleanup of the i2c code to the current CVS. In short,
it adds version info printing and some CONFIG_ cleanups (there were
CONFIG_ vars defined in Config.in that had been renamed inside the code).
Please consider for next pre of 2.4.15.
--- linux-old/Documentation/i2c/writing-clients Tue Nov 13 00:31:34 CET 2001
+++ linux/Documentation/i2c/writing-clients Tue Nov 13 00:31:34 CET 2001
@@ -366,5 +366,5 @@
The detect client function is called by i2c_probe or i2c_detect.
The `kind' parameter contains 0 if this call is due to a `force'
-parameter, and 0 otherwise (for i2c_detect, it contains 0 if
+parameter, and -1 otherwise (for i2c_detect, it contains 0 if
this call is due to the generic `force' parameter, and the chip type
number if it is due to a specific `force' parameter).
--- linux-old/drivers/i2c/i2c-algo-bit.c Tue Nov 13 00:31:36 CET 2001
+++ linux/drivers/i2c/i2c-algo-bit.c Tue Nov 13 00:31:36 CET 2001
@@ -22,5 +22,5 @@
Frodo Looijaard <frodol@dds.nl> */
-/* $Id: i2c-algo-bit.c,v 1.30 2001/07/29 02:44:25 mds Exp $ */
+/* $Id: i2c-algo-bit.c,v 1.33 2001/10/14 15:04:46 mds Exp $ */
#include <linux/kernel.h>
@@ -610,5 +609,5 @@
int __init i2c_algo_bit_init (void)
{
- printk("i2c-algo-bit.o: i2c bit algorithm module\n");
+ printk("i2c-algo-bit.o: i2c bit algorithm module version %s (%s)\n", I2C_VERSION, I2C_DATE);
return 0;
}
--- linux-old/drivers/i2c/i2c-algo-pcf.c Tue Nov 13 00:31:37 CET 2001
+++ linux/drivers/i2c/i2c-algo-pcf.c Tue Nov 13 00:31:37 CET 2001
@@ -151,6 +150,5 @@
/* check to see S1 now used as R/W ctrl -
PCF8584 does that when ESO is zero */
- /* PCF also resets PIN bit */
- if ((temp = get_pcf(adap, 1)) != (0)) {
+ if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) {
DEB2(printk("i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp));
return -ENXIO; /* definetly not PCF8584 */
@@ -168,5 +166,5 @@
set_pcf(adap, 1, I2C_PCF_PIN | I2C_PCF_ES1);
/* check to see S2 now selected */
- if ((temp = get_pcf(adap, 1)) != I2C_PCF_ES1) {
+ if (((temp = get_pcf(adap, 1)) & 0x7f) != I2C_PCF_ES1) {
DEB2(printk("i2c-algo-pcf.o: PCF detection failed -- can't select S2 (0x%02x).\n", temp));
return -ENXIO;
@@ -525,5 +523,5 @@
int __init i2c_algo_pcf_init (void)
{
- printk("i2c-algo-pcf.o: i2c pcf8584 algorithm module\n");
+ printk("i2c-algo-pcf.o: i2c pcf8584 algorithm module version %s (%s)\n", I2C_VERSION, I2C_DATE);
return 0;
}
--- linux-old/drivers/i2c/i2c-core.c Tue Nov 13 00:31:40 CET 2001
+++ linux/drivers/i2c/i2c-core.c Tue Nov 13 00:31:40 CET 2001
@@ -21,5 +21,5 @@
All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl> */
-/* $Id: i2c-core.c,v 1.64 2001/08/13 01:35:56 mds Exp $ */
+/* $Id: i2c-core.c,v 1.69 2001/10/28 20:41:47 mds Exp $ */
#include <linux/module.h>
@@ -37,5 +36,5 @@
#include <linux/init.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,1)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)
#define init_MUTEX(s) do { *(s) = MUTEX; } while(0)
#endif
@@ -1264,5 +1263,5 @@
static int __init i2c_init(void)
{
- printk("i2c-core.o: i2c core module\n");
+ printk("i2c-core.o: i2c core module version %s (%s)\n", I2C_VERSION, I2C_DATE);
memset(adapters,0,sizeof(adapters));
memset(drivers,0,sizeof(drivers));
@@ -1285,11 +1284,11 @@
extern int i2c_algo_bit_init(void);
#endif
-#ifdef CONFIG_I2C_PHILIPSPAR
+#ifdef CONFIG_I2C_BITLP
extern int i2c_bitlp_init(void);
#endif
-#ifdef CONFIG_I2C_ELV
+#ifdef CONFIG_I2C_BITELV
extern int i2c_bitelv_init(void);
#endif
-#ifdef CONFIG_I2C_VELLEMAN
+#ifdef CONFIG_I2C_BITVELLE
extern int i2c_bitvelle_init(void);
#endif
@@ -1301,5 +1300,5 @@
extern int i2c_algo_pcf_init(void);
#endif
-#ifdef CONFIG_I2C_ELEKTOR
+#ifdef CONFIG_I2C_PCFISA
extern int i2c_pcfisa_init(void);
#endif
@@ -1330,11 +1329,11 @@
i2c_algo_bit_init();
#endif
-#ifdef CONFIG_I2C_PHILIPSPAR
+#ifdef CONFIG_I2C_BITLP
i2c_bitlp_init();
#endif
-#ifdef CONFIG_I2C_ELV
+#ifdef CONFIG_I2C_BITELV
i2c_bitelv_init();
#endif
-#ifdef CONFIG_I2C_VELLEMAN
+#ifdef CONFIG_I2C_BITVELLE
i2c_bitvelle_init();
#endif
@@ -1344,5 +1343,5 @@
i2c_algo_pcf_init();
#endif
-#ifdef CONFIG_I2C_ELEKTOR
+#ifdef CONFIG_I2C_PCFISA
i2c_pcfisa_init();
#endif
--- linux-old/drivers/i2c/i2c-dev.c Tue Nov 13 00:31:41 CET 2001
+++ linux/drivers/i2c/i2c-dev.c Tue Nov 13 00:31:41 CET 2001
@@ -29,5 +29,5 @@
<pmhahn@titan.lahn.de> */
-/* $Id: i2c-dev.c,v 1.40 2001/08/25 01:28:01 mds Exp $ */
+/* $Id: i2c-dev.c,v 1.43 2001/10/14 15:04:46 mds Exp $ */
#include <linux/config.h>
@@ -488,5 +487,5 @@
int res;
- printk("i2c-dev.o: i2c /dev entries driver module\n");
+ printk("i2c-dev.o: i2c /dev entries driver module version %s (%s)\n", I2C_VERSION, I2C_DATE);
i2cdev_initialized = 0;
--- linux-old/drivers/i2c/i2c-elektor.c Tue Nov 13 00:31:42 CET 2001
+++ linux/drivers/i2c/i2c-elektor.c Tue Nov 13 00:31:42 CET 2001
@@ -75,5 +74,6 @@
int address = ctl ? (base + 1) : base;
- if (ctl && irq) {
+ /* enable irq if any specified for serial operation */
+ if (ctl && irq && (val & I2C_PCF_ESO)) {
val |= I2C_PCF_ENI;
}
@@ -274,5 +274,5 @@
}
- printk("i2c-elektor.o: i2c pcf8584-isa adapter module\n");
+ printk("i2c-elektor.o: i2c pcf8584-isa adapter module version %s (%s)\n", I2C_VERSION, I2C_DATE);
if (base == 0) {
@@ -284,6 +284,8 @@
#endif
if (pcf_isa_init() == 0) {
- if (i2c_pcf_add_bus(&pcf_isa_ops) < 0)
+ if (i2c_pcf_add_bus(&pcf_isa_ops) < 0) {
+ pcf_isa_exit();
return -ENODEV;
+ }
} else {
return -ENODEV;
--- linux-old/drivers/i2c/i2c-elv.c Tue Nov 13 00:31:43 CET 2001
+++ linux/drivers/i2c/i2c-elv.c Tue Nov 13 00:31:43 CET 2001
@@ -22,5 +22,5 @@
Frodo Looijaard <frodol@dds.nl> */
-/* $Id: i2c-elv.c,v 1.17 2001/07/29 02:44:25 mds Exp $ */
+/* $Id: i2c-elv.c,v 1.20 2001/10/14 15:04:46 mds Exp $ */
#include <linux/kernel.h>
@@ -171,5 +169,5 @@
int __init i2c_bitelv_init(void)
{
- printk("i2c-elv.o: i2c ELV parallel port adapter module\n");
+ printk("i2c-elv.o: i2c ELV parallel port adapter module version %s (%s)\n", I2C_VERSION, I2C_DATE);
if (base==0) {
/* probe some values */
--- linux-old/include/linux/i2c-id.h Tue Nov 13 00:31:43 CET 2001
+++ linux/include/linux/i2c-id.h Tue Nov 13 00:31:43 CET 2001
@@ -21,5 +21,5 @@
/* ------------------------------------------------------------------------- */
-/* $Id: i2c-id.h,v 1.35 2001/08/12 17:22:20 mds Exp $ */
+/* $Id: i2c-id.h,v 1.40 2001/11/11 22:16:33 mds Exp $ */
#ifndef I2C_ID_H
@@ -128,4 +128,7 @@
#define I2C_DRIVERID_IT87 1026
#define I2C_DRIVERID_CH700X 1027 /* single driver for CH7003-7009 digital pc to tv encoders */
+#define I2C_DRIVERID_FSCPOS 1028
+#define I2C_DRIVERID_FSCSCY 1029
+#define I2C_DRIVERID_PCF8591 1030
/*
@@ -144,5 +147,6 @@
#define I2C_ALGO_SAA7146 0x060000 /* SAA 7146 video decoder bus */
#define I2C_ALGO_ACB 0x070000 /* ACCESS.bus algorithm */
-
+#define I2C_ALGO_IIC 0x080000 /* ITE IIC bus */
+#define I2C_ALGO_SAA7134 0x090000
#define I2C_ALGO_EC 0x100000 /* ACPI embedded controller */
@@ -189,4 +193,7 @@
/* --- MPC8xx PowerPC adapters */
#define I2C_HW_MPC8XX_EPON 0x00 /* Eponymous MPC8xx I2C adapter */
+
+/* --- ITE based algorithms */
+#define I2C_HW_I_IIC 0x00 /* controller on the ITE */
/* --- SMBus only adapters */
--- linux-old/drivers/i2c/i2c-pcf8584.h Tue Nov 13 00:31:43 CET 2001
+++ linux/drivers/i2c/i2c-pcf8584.h Tue Nov 13 00:31:43 CET 2001
@@ -22,5 +22,5 @@
/* With some changes from Frodo Looijaard <frodol@dds.nl> */
-/* $Id: i2c-pcf8584.h,v 1.3 2000/01/18 23:54:07 frodo Exp $ */
+/* $Id: i2c-pcf8584.h,v 1.4 2001/10/02 00:07:37 mds Exp $ */
#ifndef I2C_PCF8584_H
--- linux-old/drivers/i2c/i2c-philips-par.c Tue Nov 13 00:31:44 CET 2001
+++ linux/drivers/i2c/i2c-philips-par.c Tue Nov 13 00:31:44 CET 2001
@@ -22,5 +22,5 @@
Frodo Looijaard <frodol@dds.nl> */
-/* $Id: i2c-philips-par.c,v 1.18 2000/07/06 19:21:49 frodo Exp $ */
+/* $Id: i2c-philips-par.c,v 1.21 2001/10/14 15:04:46 mds Exp $ */
#include <linux/kernel.h>
@@ -265,5 +264,5 @@
struct parport *port;
#endif
- printk("i2c-philips-par.o: i2c Philips parallel port adapter module\n");
+ printk("i2c-philips-par.o: i2c Philips parallel port adapter module version %s (%s)\n", I2C_VERSION, I2C_DATE);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,4)
--- linux-old/drivers/i2c/i2c-proc.c Tue Nov 13 00:31:46 CET 2001
+++ linux/drivers/i2c/i2c-proc.c Tue Nov 13 00:31:46 CET 2001
@@ -39,8 +39,4 @@
#include <linux/init.h>
-/* FIXME need i2c versioning */
-#define LM_DATE "20010825"
-#define LM_VERSION "2.6.1"
-
#ifndef THIS_MODULE
#define THIS_MODULE NULL
@@ -859,5 +853,5 @@
int __init sensors_init(void)
{
- printk("i2c-proc.o version %s (%s)\n", LM_VERSION, LM_DATE);
+ printk("i2c-proc.o version %s (%s)\n", I2C_VERSION, I2C_DATE);
i2c_initialized = 0;
if (!
@@ -904,3 +900,4 @@
return i2c_cleanup();
}
+
#endif /* MODULE */
--- linux-old/drivers/i2c/i2c-velleman.c Tue Nov 13 00:31:47 CET 2001
+++ linux/drivers/i2c/i2c-velleman.c Tue Nov 13 00:31:47 CET 2001
@@ -19,5 +19,5 @@
/* ------------------------------------------------------------------------- */
-/* $Id: i2c-velleman.c,v 1.19 2000/01/24 02:06:33 mds Exp $ */
+/* $Id: i2c-velleman.c,v 1.22 2001/10/14 15:04:46 mds Exp $ */
#include <linux/kernel.h>
@@ -161,5 +160,5 @@
int __init i2c_bitvelle_init(void)
{
- printk("i2c-velleman.o: i2c Velleman K8000 adapter module\n");
+ printk("i2c-velleman.o: i2c Velleman K8000 adapter module version %s (%s)\n", I2C_VERSION, I2C_DATE);
if (base==0) {
/* probe some values */
--- linux-old/drivers/i2c/Config.in Tue Nov 13 00:31:48 CET 2001
+++ linux/drivers/i2c/Config.in Tue Nov 13 00:31:48 CET 2001
@@ -11,20 +11,14 @@
dep_tristate 'I2C bit-banging interfaces' CONFIG_I2C_ALGOBIT $CONFIG_I2C
if [ "$CONFIG_I2C_ALGOBIT" != "n" ]; then
- dep_tristate ' Philips style parallel port adapter' CONFIG_I2C_PHILIPSPAR $CONFIG_I2C_ALGOBIT $CONFIG_PARPORT
- dep_tristate ' ELV adapter' CONFIG_I2C_ELV $CONFIG_I2C_ALGOBIT
- dep_tristate ' Velleman K9000 adapter' CONFIG_I2C_VELLEMAN $CONFIG_I2C_ALGOBIT
+ dep_tristate ' Philips style parallel port adapter' CONFIG_I2C_BITLP $CONFIG_I2C_ALGOBIT $CONFIG_PARPORT
+ dep_tristate ' ELV adapter' CONFIG_I2C_BITELV $CONFIG_I2C_ALGOBIT
+ dep_tristate ' Velleman K9000 adapter' CONFIG_I2C_BITVELLE $CONFIG_I2C_ALGOBIT
fi
dep_tristate 'I2C PCF 8584 interfaces' CONFIG_I2C_ALGOPCF $CONFIG_I2C
if [ "$CONFIG_I2C_ALGOPCF" != "n" ]; then
- dep_tristate ' Elektor ISA card' CONFIG_I2C_ELEKTOR $CONFIG_I2C_ALGOPCF
+ dep_tristate ' Elektor ISA card' CONFIG_I2C_PCFISA $CONFIG_I2C_ALGOPCF
fi
- if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
- dep_tristate 'ITE I2C Algorithm' CONFIG_ITE_I2C_ALGO $CONFIG_I2C
- if [ "$CONFIG_ITE_I2C_ALGO" != "n" ]; then
- dep_tristate ' ITE I2C Adapter' CONFIG_ITE_I2C_ADAP $CONFIG_ITE_I2C_ALGO
- fi
- fi
if [ "$CONFIG_8xx" = "y" ]; then
dep_tristate 'MPC8xx CPM I2C interface' CONFIG_I2C_ALGO8XX $CONFIG_I2C
@@ -33,4 +27,5 @@
fi
fi
+
if [ "$CONFIG_405" = "y" ]; then
dep_tristate 'PPC 405 I2C Algorithm' CONFIG_I2C_PPC405_ALGO $CONFIG_I2C
@@ -44,4 +39,5 @@
dep_tristate 'I2C device interface' CONFIG_I2C_CHARDEV $CONFIG_I2C
+
dep_tristate 'I2C /proc interface (required for hardware sensors)' CONFIG_I2C_PROC $CONFIG_I2C
--- linux-old/drivers/i2c/Makefile Tue Nov 13 00:31:48 CET 2001
+++ linux/drivers/i2c/Makefile Tue Nov 13 00:31:48 CET 2001
@@ -5,17 +5,14 @@
O_TARGET := i2c.o
-export-objs := i2c-core.o i2c-algo-bit.o i2c-algo-pcf.o \
- i2c-algo-ite.o i2c-proc.o
+export-objs := i2c-core.o i2c-algo-bit.o i2c-algo-pcf.o i2c-proc.o
obj-$(CONFIG_I2C) += i2c-core.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o
-obj-$(CONFIG_I2C_PHILIPSPAR) += i2c-philips-par.o
-obj-$(CONFIG_I2C_ELV) += i2c-elv.o
-obj-$(CONFIG_I2C_VELLEMAN) += i2c-velleman.o
+obj-$(CONFIG_I2C_BITLP) += i2c-philips-par.o
+obj-$(CONFIG_I2C_BITELV) += i2c-elv.o
+obj-$(CONFIG_I2C_BITVELLE) += i2c-velleman.o
obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o
-obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
-obj-$(CONFIG_ITE_I2C_ALGO) += i2c-algo-ite.o
-obj-$(CONFIG_ITE_I2C_ADAP) += i2c-adap-ite.o
+obj-$(CONFIG_I2C_PCFISA) += i2c-elektor.o
obj-$(CONFIG_I2C_PROC) += i2c-proc.o
--- linux-old/Documentation/Configure.help Tue Nov 13 00:31:49 CET 2001
+++ linux/Documentation/Configure.help Tue Nov 13 00:31:49 CET 2001
@@ -16041,14 +16041,32 @@
unless you are absolutely sure.
+UltraSPARC-III bootbus i2c controller driver
+CONFIG_BBC_I2C
+ The BBC devices on the UltraSPARC III have two I2C controllers. The
+ first I2C controller connects mainly to configuration PROMs (NVRAM,
+ CPU configuration, DIMM types, etc.). The second I2C controller
+ connects to environmental control devices such as fans and
+ temperature sensors. The second controller also connects to the
+ smartcard reader, if present. Say Y to enable support for these.
+
+I2C /proc support
+CONFIG_I2C_PROC
+ This provides support for i2c device entries in the /proc filesystem.
+ The entries will be found in /proc/sys/dev/sensors.
+
+ This code is also available as a module. If you want to compile
+ it as a module, say M here and read <file:Documentation/modules.txt>.
+ The module will be called i2c-proc.o.
+
I2C support
CONFIG_I2C
I2C (pronounce: I-square-C) is a slow serial bus protocol used in
- many micro controller applications and developed by Philips. SMBus,
- or System Management Bus is a subset of the I2C protocol. More
+ many micro controller applications and developed by Philips. SMBus,
+ or System Management Bus is a subset of the I2C protocol. More
information is contained in the directory <file:Documentation/i2c/>,
especially in the file called "summary" there.
Both I2C and SMBus are supported here. You will need this for
- hardware sensors support, and also for Video For Linux support.
+ hardware sensors support, and also for Video for Linux support.
Specifically, if you want to use a BT848 based frame grabber/overlay
boards under Linux, say Y here and also to "I2C bit-banging
@@ -16056,41 +16074,29 @@
If you want I2C support, you should say Y here and also to the
- specific driver for your bus adapter(s) below. If you say Y to
+ specific driver for your bus adapter(s) below. If you say Y to
"/proc file system" below, you will then get a /proc interface which
is documented in <file:Documentation/i2c/proc-interface>.
- This I2C support is also available as a module. If you want to
+ This I2C support is also available as a module. If you want to
compile it as a module, say M here and read
- <file:Documentation/modules.txt>.
- The module will be called i2c-core.o.
-
-UltraSPARC-III bootbus i2c controller driver
-CONFIG_BBC_I2C
- The BBC devices on the UltraSPARC III have two I2C controllers. The
- first I2C controller connects mainly to configuration PROMs (NVRAM,
- CPU configuration, DIMM types, etc.). The second I2C controller
- connects to environmental control devices such as fans and
- temperature sensors. The second controller also connects to the
- smartcard reader, if present. Say Y to enable support for these.
+ <file:Documentation/modules.txt>. The module will be called i2c-core.o.
I2C bit-banging interfaces
CONFIG_I2C_ALGOBIT
This allows you to use a range of I2C adapters called bit-banging
- adapters. Say Y if you own an I2C adapter belonging to this class
+ adapters. Say Y if you own an I2C adapter belonging to this class
and then say Y to the specific driver for you adapter below.
- This support is also available as a module. If you want to compile
- it as a module, say M here and read
- <file:Documentation/modules.txt>.
+ This support is also available as a module. If you want to compile
+ it as a module, say M here and read <file:Documentation/modules.txt>.
The module will be called i2c-algo-bit.o.
Philips style parallel port adapter
-CONFIG_I2C_PHILIPSPAR
- This supports parallel-port I2C adapters made by Philips. Say Y if
+CONFIG_I2C_BITLP
+ This supports parallel-port I2C adapters made by Philips. Say Y if
you own such an adapter.
- This driver is also available as a module. If you want to compile
- it as a module, say M here and read
- <file:Documentation/modules.txt>.
+ This driver is also available as a module. If you want to compile
+ it as a module, say M here and read <file:Documentation/modules.txt>.
The module will be called i2c-philips-par.o.
@@ -16099,21 +16105,19 @@
ELV adapter
-CONFIG_I2C_ELV
- This supports parallel-port I2C adapters called ELV. Say Y if you
+CONFIG_I2C_BITELV
+ This supports parallel-port I2C adapters called ELV. Say Y if you
own such an adapter.
- This driver is also available as a module. If you want to compile
- it as a module, say M here and read
- <file:Documentation/modules.txt>.
+ This driver is also available as a module. If you want to compile
+ it as a module, say M here and read <file:Documentation/modules.txt>.
The module will be called i2c-elv.o.
Velleman K9000 adapter
-CONFIG_I2C_VELLEMAN
- This supports the Velleman K9000 parallel-port I2C adapter. Say Y
- if you own such an adapter.
-
- This driver is also available as a module. If you want to compile
- it as a module, say M here and read
- <file:Documentation/modules.txt>.
+CONFIG_I2C_BITVELLE
+ This supports the Velleman K9000 parallel-port I2C adapter. Say Y if
+ you own such an adapter.
+
+ This driver is also available as a module. If you want to compile
+ it as a module, say M here and read <file:Documentation/modules.txt>.
The module will be called i2c-velleman.o.
@@ -16124,17 +16128,15 @@
Y to the specific driver for you adapter below.
- This support is also available as a module. If you want to compile
- it as a module, say M here and read
- <file:Documentation/modules.txt>.
+ This support is also available as a module. If you want to compile
+ it as a module, say M here and read <file:Documentation/modules.txt>.
The module will be called i2c-algo-pcf.o.
Elektor ISA card
-CONFIG_I2C_ELEKTOR
- This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
- such an adapter.
-
- This driver is also available as a module. If you want to compile
- it as a module, say M here and read
- <file:Documentation/modules.txt>.
+CONFIG_I2C_PCFISA
+ This supports the PCF8584 ISA bus I2C adapter. Say Y if you own such
+ an adapter.
+
+ This driver is also available as a module. If you want to compile
+ it as a module, say M here and read <file:Documentation/modules.txt>.
The module will be called i2c-elektor.o.
@@ -16142,11 +16144,10 @@
CONFIG_I2C_CHARDEV
Say Y here to use i2c-* device files, usually found in the /dev
- directory on your system. They make it possible to have user-space
- programs use the I2C bus. Information on how to do this is
- contained in the file <file:Documentation/i2c/dev-interface>.
-
- This code is also available as a module. If you want to compile
- it as a module, say M here and read
- <file:Documentation/modules.txt>.
+ directory on your system. They make it possible to have user-space
+ programs use the I2C bus. Information on how to do this is contained
+ in the file <file:Documentation/i2c/dev-interface>.
+
+ This code is also available as a module. If you want to compile
+ it as a module, say M here and read <file:Documentation/modules.txt>.
The module will be called i2c-dev.o.
-- J.A. Magallon # Let the source be with you... mailto:jamagallon@able.es Mandrake Linux release 8.2 (Cooker) for i586 Linux werewolf 2.4.15-pre3-beo #1 SMP Mon Nov 12 00:04:41 CET 2001 i686 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Nov 15 2001 - 21:00:31 EST