Linus, Alan,
Please include this update for dmfe.c in your next release(s). It is
a cleanup that takes it one big step further towards beeing 64-bit and big
endian clean. Entry level ethtool support is also added.
This patch includes the jiffies fix that was posted by Andreas Dilger a
couple of days ago.
/Tobias
diff -ru linux-2.4.14.orig/drivers/net/dmfe.c linux-2.4.14/drivers/net/dmfe.c
--- linux-2.4.14.orig/drivers/net/dmfe.c Tue Oct 23 21:28:21 2001
+++ linux-2.4.14/drivers/net/dmfe.c Tue Nov 6 21:23:46 2001
@@ -1,6 +1,4 @@
/*
- dmfe.c: Version 1.36p1 2001-05-12 for Linux kernel 2.4.x
-
A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast
ethernet driver for Linux.
Copyright (C) 1997 Sten Wang
@@ -38,19 +36,33 @@
Tobias Ringstrom <tori@unhappy.mine.nu> :
Cleaned up and added SMP safety. Thanks go to Jeff Garzik,
- Andrew Morton and Frank Davis for the SMP safety fixes.
+ Andrew Morton and Frank Davis for the SMP safety fixes.
+
+ Vojtech Pavlik <vojtech@suse.cz> :
+ Cleaned up pointer arithmetics.
+ Fixed a lot of 64bit issues.
+ Cleaned up printk()s a bit.
+ Fixed some obvious big endian problems.
+
+ Tobias Ringstrom <tori@unhappy.mine.nu> :
+ Use time_after for jiffies calculation. Added ethtool
+ support. Updated PCI resource allocation. Do not
+ forget to unmap PCI mapped skbs.
TODO
Implement pci_driver::suspend() and pci_driver::resume()
power management methods.
- Check and fix on 64bit and big endian boxes.
+ Check on 64 bit boxes.
+ Check and fix on big endian boxes.
Test and make sure PCI latency is now correct for all cases.
*/
-#define DMFE_VERSION "1.36p1 (May 12, 2001)"
+#define DRV_NAME "dmfe"
+#define DRV_VERSION "1.36.3"
+#define DRV_RELDATE "2001-11-06"
#include <linux/module.h>
@@ -68,6 +80,7 @@
#include <linux/version.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
@@ -76,10 +89,7 @@
#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/dma.h>
-
-#if BITS_PER_LONG == 64
-#error FIXME: driver does not support 64-bit platforms
-#endif
+#include <asm/uaccess.h>
/* Board/System/Debug information/definition ---------------- */
@@ -130,9 +140,9 @@
#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */
#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */
-#define DMFE_DBUG(dbug_now, msg, value) if (dmfe_debug || (dbug_now)) printk(KERN_ERR "<DMFE>: %s %lx\n", (msg), (long) (value))
+#define DMFE_DBUG(dbug_now, msg, value) if (dmfe_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
-#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR "<DMFE>: Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
/* CR9 definition: SROM/MII */
@@ -160,26 +170,22 @@
/* Structure/enum declaration ------------------------------- */
struct tx_desc {
- u32 tdes0, tdes1, tdes2, tdes3;
- u32 tx_skb_ptr;
- u32 tx_buf_ptr;
- u32 next_tx_desc;
- u32 reserved;
-};
+ u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+ char *tx_buf_ptr; /* Data for us */
+ struct tx_desc *next_tx_desc;
+} __attribute__(( aligned(32) ));
struct rx_desc {
- u32 rdes0, rdes1, rdes2, rdes3;
- u32 rx_skb_ptr;
- u32 rx_buf_ptr;
- u32 next_rx_desc;
- u32 reserved;
-};
+ u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
+ struct sk_buff *rx_skb_ptr; /* Data for us */
+ struct rx_desc *next_rx_desc;
+} __attribute__(( aligned(32) ));
struct dmfe_board_info {
u32 chip_id; /* Chip vendor/Device ID */
u32 chip_revision; /* Chip revision */
struct DEVICE *next_dev; /* next device */
- struct pci_dev * net_dev; /* PCI device */
+ struct pci_dev *pdev; /* PCI device */
spinlock_t lock;
long ioaddr; /* I/O base address */
@@ -206,10 +212,10 @@
struct rx_desc *first_rx_desc;
struct rx_desc *rx_insert_ptr;
struct rx_desc *rx_ready_ptr; /* packet come pointer */
- unsigned long tx_packet_cnt; /* transmitted packet count */
- unsigned long tx_queue_cnt; /* wait to send packet count */
- unsigned long rx_avail_cnt; /* available rx descriptor count */
- unsigned long interval_rx_cnt; /* rx packet count a callback time */
+ unsigned long tx_packet_cnt; /* transmitted packet count */
+ unsigned long tx_queue_cnt; /* wait to send packet count */
+ unsigned long rx_avail_cnt; /* available rx descriptor count */
+ unsigned long interval_rx_cnt; /* rx packet count a callback time */
u16 HPNA_command; /* For HPNA register 16 */
u16 HPNA_timer; /* For HPNA remote device check */
@@ -263,7 +269,8 @@
/* Global variable declaration ----------------------------- */
static int __devinitdata printed_version;
static char version[] __devinitdata =
- KERN_INFO "Davicom DM9xxx net driver, version " DMFE_VERSION "\n";
+ KERN_INFO DRV_NAME ": Davicom DM9xxx net driver, version "
+ DRV_VERSION " (" DRV_RELDATE ")\n";
static int dmfe_debug;
static unsigned char dmfe_media_mode = DMFE_AUTO;
@@ -358,7 +365,7 @@
static u16 read_srom_word(long ,int);
static void dmfe_interrupt(int , void *, struct pt_regs *);
static void dmfe_descriptor_init(struct dmfe_board_info *, unsigned long);
-static void allocated_rx_buffer(struct dmfe_board_info *);
+static void allocate_rx_buffer(struct dmfe_board_info *);
static void update_cr6(u32, unsigned long);
static void send_filter_frame(struct DEVICE * ,int);
static void dm9132_id_table(struct DEVICE * ,int);
@@ -371,7 +378,7 @@
static void dmfe_timer(unsigned long);
static void dmfe_rx_packet(struct DEVICE *, struct dmfe_board_info *);
static void dmfe_free_tx_pkt(struct DEVICE *, struct dmfe_board_info *);
-static void dmfe_reused_skb(struct dmfe_board_info *, struct sk_buff *);
+static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *);
static void dmfe_dynamic_reset(struct DEVICE *);
static void dmfe_free_rxbuffer(struct dmfe_board_info *);
static void dmfe_init_dm910x(struct DEVICE *);
@@ -391,31 +398,46 @@
static int __devinit dmfe_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- unsigned long pci_iobase;
- u8 pci_irqline;
struct dmfe_board_info *db; /* board information structure */
- int i;
struct net_device *dev;
u32 dev_rev, pci_pmr;
+ int i, err;
+
+ DMFE_DBUG(0, "dmfe_init_one()", 0);
if (!printed_version++)
printk(version);
- DMFE_DBUG(0, "dmfe_init_one()", 0);
+ /* Init network device */
+ dev = alloc_etherdev(sizeof(*db));
+ if (dev == NULL)
+ return -ENOMEM;
+ SET_MODULE_OWNER(dev);
+
+ if (pci_set_dma_mask(pdev, 0xffffffff)) {
+ printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+ err = -ENODEV;
+ goto err_out_free;
+ }
/* Enable Master/IO access, Disable memory access */
- i = pci_enable_device(pdev);
- if (i)
- return i;
- pci_set_master(pdev);
+ err = pci_enable_device(pdev);
+ if (err)
+ goto err_out_free;
+
+ if (!pci_resource_start(pdev, 0)) {
+ printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
- pci_iobase = pci_resource_start(pdev, 0);
- pci_irqline = pdev->irq;
+ /* Read Chip revision */
+ pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
- /* iobase check */
- if (pci_iobase == 0) {
- printk(KERN_ERR "<DMFE>: I/O base is zero\n");
- return -ENODEV;
+ if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev, dev_rev)) ) {
+ printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+ err = -ENODEV;
+ goto err_out_disable;
}
#if 0 /* pci_{enable_device,set_master} sets minimum latency for us now */
@@ -427,37 +449,20 @@
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);
#endif
- /* Read Chip revision */
- pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
-
- /* Init network device */
- dev = alloc_etherdev(sizeof(*db));
- if (dev == NULL)
- return -ENOMEM;
- SET_MODULE_OWNER(dev);
-
- /* IO range check */
- if (pci_resource_len (pdev, 0) < (CHK_IO_SIZE(pdev, dev_rev)) ) {
- printk(KERN_ERR "<DMFE>: Allocated I/O size too small\n");
- goto err_out;
- }
-
- if (!request_region(pci_iobase,
- pci_resource_len (pdev, 0),
- dev->name)) {
- printk(KERN_ERR "<DMFE>: I/O conflict : IO=%lx Range=%x\n",
- pci_iobase, CHK_IO_SIZE(pdev, dev_rev));
- goto err_out;
+ if (pci_request_regions(pdev, DRV_NAME)) {
+ printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+ err = -ENODEV;
+ goto err_out_disable;
}
/* Init system & device */
db = dev->priv;
- /* Allocated Tx/Rx descriptor memory */
+ /* Allocate Tx/Rx descriptor memory */
db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
- db->first_tx_desc = (struct tx_desc *)db->desc_pool_ptr;
+ db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
db->first_tx_desc_dma = db->desc_pool_dma_ptr;
db->buf_pool_start = db->buf_pool_ptr;
db->buf_pool_dma_start = db->buf_pool_dma_ptr;
@@ -465,13 +470,13 @@
pdev->driver_data = dev;
db->chip_id = ent->driver_data;
- db->ioaddr = pci_iobase;
+ db->ioaddr = pci_resource_start(pdev, 0);
db->chip_revision = dev_rev;
- db->net_dev = pdev;
+ db->pdev = pdev;
- dev->base_addr = pci_iobase;
- dev->irq = pci_irqline;
+ dev->base_addr = db->ioaddr;
+ dev->irq = pdev->irq;
pci_set_drvdata(pdev, dev);
dev->open = &dmfe_open;
dev->hard_start_xmit = &dmfe_start_xmit;
@@ -490,29 +495,37 @@
/* read 64 word srom data */
for (i = 0; i < 64; i++)
- ((u16 *) db->srom)[i] = read_srom_word(pci_iobase, i);
+ ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
/* Set Node address */
for (i = 0; i < 6; i++)
dev->dev_addr[i] = db->srom[20 + i];
- i = register_netdev (dev);
- if (i) goto err_out;
-
- printk(KERN_INFO "%s: Davicom DM%04lx at 0x%lx,",
- dev->name,
- ent->driver_data >> 16,
- pci_iobase);
+ err = register_netdev (dev);
+ if (err)
+ goto err_out_res;
+
+ printk(KERN_INFO "%s: Davicom DM%04lx at pci%s,",
+ dev->name,
+ ent->driver_data >> 16,
+ pdev->slot_name);
for (i = 0; i < 6; i++)
printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
- printk(", IRQ %d\n", pci_irqline);
+ printk(", irq %d.\n", dev->irq);
+
+ pci_set_master(pdev);
return 0;
-err_out:
+err_out_res:
+ pci_release_regions(pdev);
+err_out_disable:
+ pci_disable_device(pdev);
+err_out_free:
pci_set_drvdata(pdev, NULL);
kfree(dev);
- return -ENODEV;
+
+ return err;
}
@@ -524,14 +537,13 @@
DMFE_DBUG(0, "dmfe_remove_one()", 0);
if (dev) {
- pci_free_consistent(db->net_dev, sizeof(struct tx_desc) *
+ pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
db->desc_pool_dma_ptr);
- pci_free_consistent(db->net_dev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+ pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
db->buf_pool_ptr, db->buf_pool_dma_ptr);
unregister_netdev(dev);
- release_region(dev->base_addr,
- CHK_IO_SIZE(pdev, db->chip_revision));
+ pci_release_regions(pdev);
kfree(dev); /* free board information */
pci_set_drvdata(pdev, NULL);
}
@@ -552,7 +564,7 @@
DMFE_DBUG(0, "dmfe_open", 0);
- ret = request_irq(dev->irq, &dmfe_interrupt, SA_SHIRQ, dev->name, dev);
+ ret = request_irq(dev->irq, &dmfe_interrupt, SA_SHIRQ, dev->name, dev);
if (ret)
return ret;
@@ -683,7 +695,7 @@
/* Too large packet check */
if (skb->len > MAX_PACKET_SIZE) {
- printk(KERN_ERR "<DMFE>: big packet = %d\n", (u16)skb->len);
+ printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
dev_kfree_skb(skb);
return 0;
}
@@ -693,7 +705,7 @@
/* No Tx resource check, it never happen nromally */
if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) {
spin_unlock_irqrestore(&db->lock, flags);
- printk(KERN_ERR "<DMFE>: No Tx resource %ld\n", db->tx_queue_cnt);
+ printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_queue_cnt);
return 1;
}
@@ -702,11 +714,11 @@
/* transmit this packet */
txptr = db->tx_insert_ptr;
- memcpy( (char *) txptr->tx_buf_ptr, (char *) skb->data, skb->len);
+ memcpy(txptr->tx_buf_ptr, skb->data, skb->len);
txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
/* Point to next transmit free descriptor */
- db->tx_insert_ptr = (struct tx_desc *) txptr->next_tx_desc;
+ db->tx_insert_ptr = txptr->next_tx_desc;
/* Transmit Packet Process */
if ( (!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT) ) {
@@ -765,7 +777,7 @@
#if 0
/* show statistic counter */
- printk("<DMFE>: FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
+ printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
db->tx_fifo_underrun, db->tx_excessive_collision,
db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
@@ -822,9 +834,9 @@
if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
dmfe_rx_packet(dev, db);
- /* reallocated rx descriptor buffer */
+ /* reallocate rx descriptor buffer */
if (db->rx_avail_cnt<RX_DESC_CNT)
- allocated_rx_buffer(db);
+ allocate_rx_buffer(db);
/* Free the transmitted descriptor */
if ( db->cr5_data & 0x01)
@@ -852,11 +864,13 @@
{
struct tx_desc *txptr;
unsigned long ioaddr = dev->base_addr;
+ u32 tdes0;
txptr = db->tx_remove_ptr;
while(db->tx_packet_cnt) {
- /* printk("<DMFE>: tdes0=%x\n", txptr->tdes0); */
- if (txptr->tdes0 & 0x80000000)
+ tdes0 = le32_to_cpu(txptr->tdes0);
+ /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+ if (tdes0 & 0x80000000)
break;
/* A packet sent completed */
@@ -864,38 +878,38 @@
db->stats.tx_packets++;
/* Transmit statistic counter */
- if ( txptr->tdes0 != 0x7fffffff ) {
- /* printk("<DMFE>: tdes0=%x\n", txptr->tdes0); */
- db->stats.collisions += (txptr->tdes0 >> 3) & 0xf;
- db->stats.tx_bytes += txptr->tdes1 & 0x7ff;
- if (txptr->tdes0 & TDES0_ERR_MASK) {
+ if ( tdes0 != 0x7fffffff ) {
+ /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+ db->stats.collisions += (tdes0 >> 3) & 0xf;
+ db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
+ if (tdes0 & TDES0_ERR_MASK) {
db->stats.tx_errors++;
- if (txptr->tdes0 & 0x0002) { /* UnderRun */
+ if (tdes0 & 0x0002) { /* UnderRun */
db->tx_fifo_underrun++;
if ( !(db->cr6_data & CR6_SFT) ) {
db->cr6_data = db->cr6_data | CR6_SFT;
update_cr6(db->cr6_data, db->ioaddr);
}
}
- if (txptr->tdes0 & 0x0100)
+ if (tdes0 & 0x0100)
db->tx_excessive_collision++;
- if (txptr->tdes0 & 0x0200)
+ if (tdes0 & 0x0200)
db->tx_late_collision++;
- if (txptr->tdes0 & 0x0400)
+ if (tdes0 & 0x0400)
db->tx_no_carrier++;
- if (txptr->tdes0 & 0x0800)
+ if (tdes0 & 0x0800)
db->tx_loss_carrier++;
- if (txptr->tdes0 & 0x4000)
+ if (tdes0 & 0x4000)
db->tx_jabber_timeout++;
}
}
- txptr = (struct tx_desc *) txptr->next_tx_desc;
+ txptr = txptr->next_tx_desc;
}/* End of while */
/* Update TX remove pointer to next */
- db->tx_remove_ptr = (struct tx_desc *) txptr;
+ db->tx_remove_ptr = txptr;
/* Send the Tx packet in queue */
if ( (db->tx_packet_cnt < TX_MAX_SEND_CNT) && db->tx_queue_cnt ) {
@@ -921,49 +935,51 @@
struct rx_desc *rxptr;
struct sk_buff *skb;
int rxlen;
+ u32 rdes0;
rxptr = db->rx_ready_ptr;
while(db->rx_avail_cnt) {
- if (rxptr->rdes0 & 0x80000000) /* packet owner check */
+ rdes0 = le32_to_cpu(rxptr->rdes0);
+ if (rdes0 & 0x80000000) /* packet owner check */
break;
db->rx_avail_cnt--;
db->interval_rx_cnt++;
- if ( (rxptr->rdes0 & 0x300) != 0x300) {
+ pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+ if ( (rdes0 & 0x300) != 0x300) {
/* A packet without First/Last flag */
- /* reused this SKB */
- DMFE_DBUG(0, "Reused SK buffer, rdes0", rxptr->rdes0);
- dmfe_reused_skb(db, (struct sk_buff *) rxptr->rx_skb_ptr);
+ /* reuse this SKB */
+ DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+ dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
} else {
/* A packet with First/Last flag */
- rxlen = ( (rxptr->rdes0 >> 16) & 0x3fff) - 4;
+ rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
/* error summary bit check */
- if (rxptr->rdes0 & 0x8000) {
+ if (rdes0 & 0x8000) {
/* This is a error packet */
- //printk("<DMFE>: rdes0: %lx\n", rxptr->rdes0);
+ //printk(DRV_NAME ": rdes0: %lx\n", rdes0);
db->stats.rx_errors++;
- if (rxptr->rdes0 & 1)
+ if (rdes0 & 1)
db->stats.rx_fifo_errors++;
- if (rxptr->rdes0 & 2)
+ if (rdes0 & 2)
db->stats.rx_crc_errors++;
- if (rxptr->rdes0 & 0x80)
+ if (rdes0 & 0x80)
db->stats.rx_length_errors++;
}
- if ( !(rxptr->rdes0 & 0x8000) ||
+ if ( !(rdes0 & 0x8000) ||
((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
- skb = (struct sk_buff *) rxptr->rx_skb_ptr;
+ skb = rxptr->rx_skb_ptr;
/* Received Packet CRC check need or not */
if ( (db->dm910x_chk_mode & 1) &&
(cal_CRC(skb->tail, rxlen, 1) !=
- (*(unsigned long *) (skb->tail+rxlen) )
- ) ) {
+ (*(u32 *) (skb->tail+rxlen) ))) { /* FIXME (?) */
/* Found a error received packet */
- dmfe_reused_skb(db, (struct sk_buff *) rxptr->rx_skb_ptr);
+ dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
db->dm910x_chk_mode = 3;
} else {
/* Good packet, send to upper layer */
@@ -971,11 +987,11 @@
if ( (rxlen < RX_COPY_SIZE) &&
( (skb = dev_alloc_skb(rxlen + 2) )
!= NULL) ) {
- /* size less than COPY_SIZE, allocated a rxlen SKB */
+ /* size less than COPY_SIZE, allocate a rxlen SKB */
skb->dev = dev;
skb_reserve(skb, 2); /* 16byte align */
- memcpy(skb_put(skb, rxlen), ((struct sk_buff *) rxptr->rx_skb_ptr)->tail, rxlen);
- dmfe_reused_skb(db, (struct sk_buff *) rxptr->rx_skb_ptr);
+ memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen);
+ dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
} else {
skb->dev = dev;
skb_put(skb, rxlen);
@@ -988,12 +1004,12 @@
}
} else {
/* Reuse SKB buffer when the packet is error */
- DMFE_DBUG(0, "Reused SK buffer, rdes0", rxptr->rdes0);
- dmfe_reused_skb(db, (struct sk_buff *) rxptr->rx_skb_ptr);
+ DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+ dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
}
}
- rxptr = (struct rx_desc *) rxptr->next_rx_desc;
+ rxptr = rxptr->next_rx_desc;
}
db->rx_ready_ptr = rxptr;
@@ -1051,19 +1067,57 @@
/*
+ * Process the ethtool ioctl command
+ */
+
+static int dmfe_ethtool_ioctl(struct net_device *dev, void *useraddr)
+{
+ struct dmfe_board_info *db = dev->priv;
+ struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
+ u32 ethcmd;
+
+ if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd)))
+ return -EFAULT;
+
+ switch (ethcmd) {
+ case ETHTOOL_GDRVINFO:
+ strcpy(info.driver, DRV_NAME);
+ strcpy(info.version, DRV_VERSION);
+ if (db->pdev)
+ strcpy(info.bus_info, db->pdev->slot_name);
+ else
+ sprintf(info.bus_info, "EISA 0x%lx %d",
+ dev->base_addr, dev->irq);
+ if (copy_to_user(useraddr, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+
+/*
* Process the upper socket ioctl command
*/
static int dmfe_do_ioctl(struct DEVICE *dev, struct ifreq *ifr, int cmd)
{
+ int retval = -EOPNOTSUPP;
DMFE_DBUG(0, "dmfe_do_ioctl()", 0);
- return 0;
+
+ switch(cmd) {
+ case SIOCETHTOOL:
+ return dmfe_ethtool_ioctl(dev, (void*)ifr->ifr_data);
+ }
+
+ return retval;
}
/*
* A periodic timer routine
- * Dynamic media sense, allocated Rx buffer...
+ * Dynamic media sense, allocate Rx buffer...
*/
static void dmfe_timer(unsigned long data)
@@ -1109,11 +1163,11 @@
/* TX polling kick monitor */
if ( db->tx_packet_cnt &&
- ((jiffies - dev->trans_start) > DMFE_TX_KICK) ) {
+ time_after(jiffies, dev->trans_start + DMFE_TX_KICK) ) {
outl(0x1, dev->base_addr + DCR1); /* Tx polling again */
/* TX Timeout */
- if ( (jiffies - dev->trans_start) > DMFE_TX_TIMEOUT ) {
+ if ( time_after(jiffies, dev->trans_start + DMFE_TX_TIMEOUT) ) {
db->reset_TXtimeout++;
db->wait_reset = 1;
printk(KERN_WARNING "%s: Tx timeout - resetting\n",
@@ -1244,35 +1298,36 @@
/* free allocated rx buffer */
while (db->rx_avail_cnt) {
- dev_kfree_skb( (void *) (db->rx_ready_ptr->rx_skb_ptr) );
- db->rx_ready_ptr = (struct rx_desc *) db->rx_ready_ptr->next_rx_desc;
+ dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
+ db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
db->rx_avail_cnt--;
}
}
/*
- * Reused the SK buffer
+ * Reuse the SK buffer
*/
-static void dmfe_reused_skb(struct dmfe_board_info *db, struct sk_buff * skb)
+static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb)
{
struct rx_desc *rxptr = db->rx_insert_ptr;
- if (!(rxptr->rdes0 & 0x80000000)) {
- rxptr->rx_skb_ptr = (u32) skb;
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->net_dev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
+ rxptr->rx_skb_ptr = skb;
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
db->rx_avail_cnt++;
- db->rx_insert_ptr = (struct rx_desc *) rxptr->next_rx_desc;
+ db->rx_insert_ptr = rxptr->next_rx_desc;
} else
- DMFE_DBUG(0, "SK Buffer reused method error", db->rx_avail_cnt);
+ DMFE_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
}
/*
* Initialize transmit/Receive descriptor
- * Using Chain structure, and allocated Tx/Rx buffer
+ * Using Chain structure, and allocate Tx/Rx buffer
*/
static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioaddr)
@@ -1292,8 +1347,8 @@
outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
/* rx descriptor start pointer */
- db->first_rx_desc = (struct rx_desc *) ( (u32) db->first_tx_desc + sizeof(struct rx_desc) * TX_DESC_CNT );
- db->first_rx_desc_dma = ( db->first_tx_desc_dma + sizeof(struct rx_desc) * TX_DESC_CNT);
+ db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
db->rx_insert_ptr = db->first_rx_desc;
db->rx_ready_ptr = db->first_rx_desc;
outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
@@ -1303,18 +1358,18 @@
tmp_buf_dma = db->buf_pool_dma_start;
tmp_tx_dma = db->first_tx_desc_dma;
for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
- tmp_tx->tx_buf_ptr = (u32) tmp_buf;
+ tmp_tx->tx_buf_ptr = tmp_buf;
tmp_tx->tdes0 = cpu_to_le32(0);
tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
tmp_tx_dma += sizeof(struct tx_desc);
tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
- tmp_tx->next_tx_desc = (u32) ((u32) tmp_tx + sizeof(struct tx_desc));
- tmp_buf = (unsigned char *) ((u32) tmp_buf + TX_BUF_ALLOC);
+ tmp_tx->next_tx_desc = tmp_tx + 1;
+ tmp_buf = tmp_buf + TX_BUF_ALLOC;
tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
}
(--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
- tmp_tx->next_tx_desc = (u32) db->first_tx_desc;
+ tmp_tx->next_tx_desc = db->first_tx_desc;
/* Init Receive descriptor chain */
tmp_rx_dma=db->first_rx_desc_dma;
@@ -1323,13 +1378,13 @@
tmp_rx->rdes1 = cpu_to_le32(0x01000600);
tmp_rx_dma += sizeof(struct rx_desc);
tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
- tmp_rx->next_rx_desc = (u32) ((u32) tmp_rx + sizeof(struct rx_desc));
+ tmp_rx->next_rx_desc = tmp_rx + 1;
}
(--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
- tmp_rx->next_rx_desc = (u32) db->first_rx_desc;
+ tmp_rx->next_rx_desc = db->first_rx_desc;
- /* pre-allocated Rx buffer */
- allocated_rx_buffer(db);
+ /* pre-allocate Rx buffer */
+ allocate_rx_buffer(db);
}
@@ -1438,7 +1493,7 @@
}
/* prepare the setup frame */
- db->tx_insert_ptr = (struct tx_desc *) txptr->next_tx_desc;
+ db->tx_insert_ptr = txptr->next_tx_desc;
txptr->tdes1 = cpu_to_le32(0x890000c0);
/* Resource Check and Send the setup packet */
@@ -1457,10 +1512,10 @@
/*
* Allocate rx buffer,
- * As possible as allocated maxiumn Rx buffer
+ * As possible as allocate maxiumn Rx buffer
*/
-static void allocated_rx_buffer(struct dmfe_board_info *db)
+static void allocate_rx_buffer(struct dmfe_board_info *db)
{
struct rx_desc *rxptr;
struct sk_buff *skb;
@@ -1470,10 +1525,11 @@
while(db->rx_avail_cnt < RX_DESC_CNT) {
if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
break;
- rxptr->rx_skb_ptr = (u32) skb; /* FIXME */
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->net_dev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ rxptr->rx_skb_ptr = skb; /* FIXME (?) */
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
- rxptr = (struct rx_desc *) rxptr->next_rx_desc;
+ rxptr = rxptr->next_rx_desc;
db->rx_avail_cnt++;
}
@@ -1540,7 +1596,7 @@
phy_mode = phy_read(db->ioaddr, db->phy_addr, 7, db->chip_id) & 0xf000;
else /* DM9102/DM9102A */
phy_mode = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0xf000;
- /* printk("<DMFE>: Phy_mode %x ",phy_mode); */
+ /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
switch (phy_mode) {
case 0x1000: db->op_mode = DMFE_10MHF; break;
case 0x2000: db->op_mode = DMFE_10MFD; break;
@@ -1830,7 +1886,7 @@
if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) {
/* SROM V4.01 */
/* Get NIC support media mode */
- db->NIC_capability = *(u16 *) (&srom[34]);
+ db->NIC_capability = le16_to_cpup(srom + 34);
db->PHY_reg4 = 0;
for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) {
switch( db->NIC_capability & tmp_reg ) {
@@ -1842,7 +1898,7 @@
}
/* Media Mode Force or not check */
- dmfe_mode = *( (int *) &srom[34]) & *( (int *) &srom[36] );
+ dmfe_mode = le32_to_cpup(srom + 34) & le32_to_cpup(srom + 36);
switch(dmfe_mode) {
case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */
case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */
@@ -2024,7 +2080,7 @@
MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)");
MODULE_PARM_DESC(mode, "Davicom DM9xxx: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function (bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)");
-
+
/* Description:
* when user used insmod to add module, system invoked init_module()
* to initilize and register.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Nov 07 2001 - 21:00:32 EST