Re: Problem with gigabit NIC acenic: 3c985b-sx

From: Jeff Garzik (jgarzik@mandrakesoft.com)
Date: Tue Nov 06 2001 - 11:21:22 EST

Next message: Richard B. Johnson: "RE: Mylex/Compaq RAID controller placement in config"
Previous message: Marek Michalkiewicz: "deactivate_page in loop.c, min/max in isofs/compress.c"
In reply to: Chun-Ying Huang: "Problem with gigabit NIC acenic: 3c985b-sx"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Chun-Ying Huang wrote:
>
> Dear all:
>
> I've install a 3c985b-sx NIC on my linux 2.4.13 box.
> But when loading the 'acenic' module, it shows the message:
>
> eth1: 3Com 3C985 Gigabit Ethernet at 0xdf020000, irq 10
> Tigon II (Rev. 6), Firmware: 12.4.11, MAC: 00:60:08:f7:04:1e
> PCI bus width: 32 bits, speed: 33MHz, latency: 64 clks
> eth1: Firmware NOT running!

should be fixed in 2.4.14.

-- Jeff Garzik | Only so many songs can be sung Building 1024 | with two lips, two lungs, and one tongue. MandrakeSoft | - nomeansno

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Next message: Richard B. Johnson: "RE: Mylex/Compaq RAID controller placement in config"
Previous message: Marek Michalkiewicz: "deactivate_page in loop.c, min/max in isofs/compress.c"
In reply to: Chun-Ying Huang: "Problem with gigabit NIC acenic: 3c985b-sx"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Wed Nov 07 2001 - 21:00:30 EST