Hi,
Hardware and driver details are at the end; first, the problem:
I've been getting messages like these in the kernel logs on one of our
colocated servers:
sym53c875E-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
sym53c875E-0:0: ERROR (81:0) (8-0-0) (10/9d) @ (script 38:f31c0004).
sym53c875E-0: script cmd = e21c0004
sym53c875E-0: regdump: da 00 00 9d 47 10 00 07 04 08 80 00 80 00 0f 02 63 00 00 00 02 ff ff ff.
sym53c875E-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
scsi : aborting command due to timeout : pid 7737, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 00 3c 80 00 00 80 00
sym53c8xx_abort: pid=7737 serial_number=7752 serial_number_at_timeout=7752
SCSI host 0 abort (pid 7737) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
sym53c8xx_reset: pid=7737 reset_flags=2 serial_number=7752 serial_number_at_timeout=7752
I thought this might be due to a bad card / cable so yesterday the ISP
replaced the SCSI card and cable with another pair. This morning I've
got these in the logs:
sym53c875E-0: interrupted SCRIPT address not found.
sym53c875E-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
sym53c875E-0: interrupted SCRIPT address not found.
sym53c875E-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
sym53c875E-0:0: ERROR (81:0) (8-0-0) (10/9d) @ (script 38:f31c0004).
sym53c875E-0: script cmd = e21c0004
sym53c875E-0: regdump: da 00 00 9d 47 10 00 0f 00 08 80 00 80 00 07 02 63 00 00 00 02 ff ff ff.
sym53c875E-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
sym53c875E-0: interrupted SCRIPT address not found.
sym53c875E-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
I'd really appreciate if somebody could shed some light on this and
recommend a solution. This has already caused a filesystem corruption
and a forced reboot.
I'm not on the list, so please Cc to berkan@runtime-collective.com
if you reply.
Cheers,
Berkan
Kernel: Linux 2.2.20pre11 for Intel x86
SCSI hardware and driver:
[relevant bits from boot messages]
sym53c8xx: at PCI bus 0, device 11, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875E detected with Tekram NVRAM
sym53c875E-0: rev 0x26 on pci bus 0 device 11 function 0 irq 10
sym53c875E-0: Tekram format NVRAM, ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.1-20000726
scsi : 1 host.
Vendor: IBM Model: DDYS-T09170N Rev: S80D
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
scsi : detected 1 SCSI disk total.
sym53c875E-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17916240 [8748 MB] [8.7 GB]
[from lspci -v]
00:0b.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 26)
Subsystem: Symbios Logic Inc. (formerly NCR): Unknown device 1000
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at b800
Memory at da800000 (32-bit, non-prefetchable)
Memory at da000000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 1
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Nov 07 2001 - 21:00:28 EST