problem whit kernel 2.4.X

From: victor (ixnay@infonegocio.com)
Date: Sat Nov 03 2001 - 17:59:20 EST

Next message: arjan@fenrus.demon.nl: "Re: Adaptec vs Symbios performance"
Previous message: Stephan von Krawczynski: "Adaptec vs Symbios performance"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello

i cant boot ok with a kernel 2.4.X (any version)

i compile and boot the 2.2.19 whitout problem (the 2.2.20 problem is in other mail) but when i boot whit 2.4 series the
scsi subsystem fails

i have a alcor alphastation 5/266 and this are the loop messages

the scsi controller is a Qlogic isp 1020 and the driver i am using is
Qlogic PCI

scsi: aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 0
scsi: aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 0
scsi: aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 0
scsi: aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 0

what i am doing wrog :?

thaks in advantage

-- Best regards, victor mailto:ixnay@infonegocio.com

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Next message: arjan@fenrus.demon.nl: "Re: Adaptec vs Symbios performance"
Previous message: Stephan von Krawczynski: "Adaptec vs Symbios performance"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Wed Nov 07 2001 - 21:00:21 EST