Re: Intel EEPro 100 with kernel drivers

From: Juergen Hasch (Hasch@t-online.de)
Date: Thu Nov 01 2001 - 03:48:56 EST


> Here's the full /proc/net/PRO_LAN_Adapters/eth0.info output (after NFS
> timeouts):
>
> gekko:~# cat /proc/net/PRO_LAN_Adapters/eth0.info
> Description Intel(R) 8255x-based Ethernet Adapter
> Driver_Name e100
> Driver_Version 1.6.22
> PCI_Vendor 0x8086
> PCI_Device_ID 0x1229
> PCI_Subsystem_Vendor 0x1028
> PCI_Subsystem_ID 0x009b
> PCI_Revision_ID 0x0008
> PCI_Bus 2
> PCI_Slot 4
> IRQ 16
> System_Device_Name eth0
> Current_HWaddr 00:B0:D0:F0:8B:65
> Permanent_HWaddr 00:B0:D0:F0:8B:65
> Part_Number 07195d-000
>
> Link up
> Speed 100
> Duplex full
> State up
>
> Rx_Packets 27747043
> Tx_Packets 25999146
> Rx_Bytes 1730389022
> Tx_Bytes 21884644
> Rx_Errors 0
> Tx_Errors 0
> Rx_Dropped 0
> Tx_Dropped 0
> Multicast 0
> Collisions 0
> Rx_Length_Errors 0
> Rx_Over_Errors 0
> Rx_CRC_Errors 0
> Rx_Frame_Errors 0
> Rx_FIFO_Errors 0
> Rx_Missed_Errors 0
> Tx_Aborted_Errors 0
> Tx_Carrier_Errors 0
> Tx_FIFO_Errors 0
> Tx_Heartbeat_Errors 0
> Tx_Window_Errors 0
>
> Rx_TCP_Checksum_Good 0
> Rx_TCP_Checksum_Bad 0
> Tx_TCP_Checksum_Good 0
> Tx_TCP_Checksum_Bad 0
>
> Tx_Abort_Late_Coll 0
> Tx_Deferred_Ok 0
> Tx_Single_Coll_Ok 0
> Tx_Multi_Coll_Ok 0
> Rx_Long_Length_Errors 0
> Rx_Align_Errors 0
>
> Tx_Flow_Control_Pause 0
> Rx_Flow_Control_Pause 0
> Rx_Flow_Control_Unsup 0
>
> Tx_TCO_Packets 0
> Rx_TCO_Packets 1
> scbp = 0xf89da000 bddp = 0xf77568c0

Well this doesn't look exactly the same as on the system I had problems with.
But your Rx_TCO_Packets counter is 1, so this may be related
(I also got Rx overrun errors). It may be that your BMC receives the packet
and simply chooses to ignore it because it is no valid server management
packet.

Could you make another test and take a look at the eth0.info ?
I could reproduce the problem when copying a large file over NFS, but not
when transferring it via ftp. Try this a few times.
If you can reproduce you network card being stuck only when using NFS and
having Rx_TCO_Packets > 0 after it is stuck, this is it.
Then you either need tu upgrade your BMC firmware or add another network card,
which doesn't eat NFS packets.

...Juergen

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Wed Nov 07 2001 - 21:00:14 EST