Hi,
I am having some strange problems with a special mediaGX device.
There is a BT878 and a DP83815 onboard, and I want to use an
MPEG2 decoder in its only PCI slot, this is why I try to compile
a kernel for it.
The original SuSE 7.2 kernel (2.4.4) works, but every kernel I
tried to compile for it fails because the DP83815 does not get
its interrupt. This is what the driver says:
natsemi.c:v1.07 1/9/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/natsemi.html
(unofficial 2.4.x kernel port, version 1.07+LK1.0.8, Aug 07, 2001 Jeff Garzik
, Tjeerd Mulder)
PCI: Found IRQ 10 for device 00:0e.0
IRQ routing conflict for 00:0e.0, have irq 11, want irq 10
eth0: NatSemi DP83815 at 0xc2815000, fb:ff:fb:ff:fb:ff, IRQ 11.
eth0: Transceiver status 0x7869 advertising 05e1.
Attached are lspci -v output and the boot.msg of the non-working kernel
2.4.9-ac12 (sorry, latest I tried...)
Any help (configuration options, patches, hints) welcome! :)
Thanks,
Wolfgang
This archive was generated by hypermail 2b29 : Wed Oct 31 2001 - 21:00:31 EST