On Wed, 26 Sep 2001, Ingo Molnar wrote:
> sample startup of the netconsole on the server:
>
> insmod netconsole dev=eth1 target_ip=0x0a000701 \
> source_port=6666 \
> target_port=6666 \
> target_eth_byte0=0x00 \
> target_eth_byte1=0x90\
> target_eth_byte2=0x27 \
> target_eth_byte3=0x8C \
> target_eth_byte4=0xA0 \
> target_eth_byte5=0xA8
Ugh. Maybe a wrapper script (netconsole-server) which automates this is
in order? I imagine the eth_byteX is a MAC address (or at least that this
is in the documentation)?
> > and on the client:
> >
> > # ./netconsole-client -server 10.0.7.5 -client 10.0.7.1 -port 6666
> > [...network console startup...]
> > netconsole: network logging started up successfully!
> > SysRq : Loglevel set to 9
<wishlist>
Any chance the netconsole-client can be set up to listen for multiple hosts
and log to the local syslog? This would allow you to run netconsole-client
on your normal syslog host and add timestamps, clean up old logs, etc.
I take it that this is only a one-way interface (i.e. logs sent from the
server to the client), and not a real serial-console replacement?
</wishlist>
In any case, this will be EXTREMELY useful for me, as a lot of new machines
do not have serial ports and are a PITA to debug in case of a crash. Thanks.
Cheers, Andreas
-- Andreas Dilger \ "If a man ate a pound of pasta and a pound of antipasto, \ would they cancel out, leaving him still hungry?" http://www-mddsp.enel.ucalgary.ca/People/adilger/ -- Dogbert- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Sep 30 2001 - 21:00:51 EST