I am having a problem with the md software raid in 2.4.10. I have
tried 2.4.10 final and 2.4.10-pre13, and both exhibit the same problem.
The problem does not appear in 2.4.9 so far.
The problem is that when adding a device to a degraded raid, the system
locks up. If I boot 2.4.9 it adds it fine, and starts the recovery.
If the raid is recovered, 2.4.10 boots fine of the raid.
The system is using 2 x 18G IBM U160 hot swap scsi drives on an aic7xxx
controller.
Does anyone know what the md changes between 2.4.9 and 2.4.10 were and
if any of them could be causing the lockups I am seeing?
It seems like occationally 2.4.10 will succeed at adding a drive to the
raid without crashing, but most of the time it does crash.
Please let me know if there is any logs or such that I can provide to
possibly help figure out what is going on.
The system is an IBM 8654-51Y. P3 1GHz, 256M ram.
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Sep 30 2001 - 21:00:24 EST