USB verbose debug is ON, using driver usb-uhci, on an alpha, kernel
2.4.9, new batteries in the thing. This worked with 2.4.7. What
happened? It seems like every other kernel version it gets broken
again, and I can't sync my visor.
Aug 28 01:08:53 draal kernel: usb-uhci.c: $Revision: 1.259 $ time 12:40:16 Aug 25 2001
Aug 28 01:08:53 draal kernel: usb-uhci.c: High bandwidth mode enabled
Aug 28 01:08:53 draal kernel: usb-uhci.c: USB UHCI at I/O 0x8080, IRQ 18
Aug 28 01:08:53 draal kernel: usb-uhci.c: Detected 2 ports
Aug 28 01:08:53 draal kernel: usb.c: new USB bus registered, assigned bus number 1
Aug 28 01:08:53 draal kernel: usb.c: kmalloc IF fffffc000fbef0a0, numif 1
Aug 28 01:08:53 draal kernel: usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
Aug 28 01:08:53 draal kernel: usb.c: USB device number 1 default language ID 0x0
Aug 28 01:08:53 draal kernel: Product: USB UHCI Root Hub
Aug 28 01:08:53 draal kernel: SerialNumber: 8080
Aug 28 01:08:53 draal kernel: hub.c: USB hub found
Aug 28 01:08:53 draal kernel: hub.c: 2 ports detected
Aug 28 01:08:53 draal kernel: hub.c: standalone hub
Aug 28 01:08:53 draal kernel: hub.c: ganged power switching
Aug 28 01:08:53 draal kernel: hub.c: global over-current protection
Aug 28 01:08:53 draal kernel: hub.c: power on to power good time: 2ms
Aug 28 01:08:53 draal kernel: hub.c: hub controller current requirement: 0mA
Aug 28 01:08:53 draal kernel: hub.c: port removable status: RR
Aug 28 01:08:53 draal kernel: hub.c: local power source is good
Aug 28 01:08:53 draal kernel: hub.c: no over-current condition exists
Aug 28 01:08:53 draal kernel: hub.c: enabling power on all ports
Aug 28 01:08:53 draal kernel: usb.c: hub driver claimed interface fffffc000fbef0a0
Aug 28 01:08:53 draal kernel: usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
Aug 28 01:08:53 draal kernel: hub.c: port 1 connection change
Aug 28 01:08:53 draal kernel: hub.c: port 1, portstatus 100, change 3, 12 Mb/s
Aug 28 01:08:53 draal kernel: hub.c: port 2 connection change
Aug 28 01:08:53 draal kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s
Aug 28 01:08:53 draal kernel: hub.c: port 1 enable change, status 100
Aug 28 01:08:53 draal kernel: hub.c: port 2 enable change, status 100
Aug 28 01:09:01 draal kernel: hub.c: port 1 connection change
Aug 28 01:09:01 draal kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s
Aug 28 01:09:01 draal kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s
Aug 28 01:09:01 draal kernel: hub.c: USB new device connect on bus1/1, assigned device number 2
Aug 28 01:09:04 draal kernel: usb_control/bulk_msg: timeout
Aug 28 01:09:04 draal kernel: usb.c: USB device not accepting new address=2 (error=-60)
Aug 28 01:09:04 draal kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s
Aug 28 01:09:04 draal kernel: hub.c: USB new device connect on bus1/1, assigned device number 3
Aug 28 01:09:07 draal kernel: usb_control/bulk_msg: timeout
Aug 28 01:09:07 draal kernel: usb.c: USB device not accepting new address=3 (error=-60)
Aug 28 01:09:34 draal kernel: hub.c: port 1 connection change
Aug 28 01:09:34 draal kernel: hub.c: port 1, portstatus 100, change 3, 12 Mb/s
Aug 28 01:09:34 draal kernel: hub.c: port 1 enable change, status 100
Aug 28 01:15:22 draal kernel: hub.c: port 1 connection change
Aug 28 01:15:22 draal kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s
Aug 28 01:15:22 draal kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s
Aug 28 01:15:22 draal kernel: hub.c: USB new device connect on bus1/1, assigned device number 4
Aug 28 01:15:25 draal kernel: usb_control/bulk_msg: timeout
Please cc me as I am not on this list.
Cheers,
-- Bob
Bob McElrath (rsmcelrath@students.wisc.edu)
Univ. of Wisconsin at Madison, Department of Physics
This archive was generated by hypermail 2b29 : Fri Aug 31 2001 - 21:00:27 EST