Thanks all for the info. You have been very helpful.
Many Thanks,
Chuck
On Mon, Aug 20, 2001 at 09:04:28AM -0700, george anzinger wrote:
> chuckw@ieee.org wrote:
> >
> > Thanks.
> >
> > So, Bottom halves don't need to be re-entrant as do tasklets. SoftIRQ's
> > need to be re-entrant. The advantage of tasklets is that each tasklet can
> > be farmed out to different CPU's AND they don't need to be re-entrant
> > because only one instance is allowed at a time. I think I got it.
> >
> > Could you direct me to some code in the kernel which uses tasklets
> > so I can see the inner workings?
> >
> > Thanks much,
> > Chuck
> >
> > On Sun, Aug 19, 2001 at 06:59:22PM +0200, Anders Peter Fugmann wrote:
> > >
> > > chuckw@ieee.org wrote:
> > > > Greetings,
> > > > I was reading the unreliable guide to kernel hacking and was looking for
> > > > a little clarification on something. 2 Bottom halves cannot run at the same
> > > > time, why?
> > >
> > > Per linux definition of bottom halves, there can only run one buttom
> > > half at one system wide. But dont use those - They are old and waists
> > > resources. Try tasklets instead. Multible tasklets can run in parrallel
> > > (but not the same tasklet)
> > >
> > > > Also, could someone give me an example of a service which is a bottom half/
> > > > tasklet/SoftIRQ?
> > > Simple.
> > >
> > > Imagine some hardware that generates interrupts.
> > > Now we want to write a driver that keeps the hardware busy, so we
> > > implement a top half handler (IRQ-handler), and let it retrieve som data
> > > from the hardware. Instead of processing it right away, we shedule a
> > > tasklet to do that job. This way we can handle more interrupts/sec from
> > > the card, and the hardware is kept busy.
> > >
> > >
> > > To summerize.
> > > Buttom halves are the strictest (only one at a time.)
> > > Takslets can run in parralel, but still no need to worry about reentrant
> > > code.
> > > SoftIrq give no guarrentee at all, and should be used with great care
> > > (code need to be reentrant).
> > >
> > > Also try to readLinux device drivers by A. Rubini:
> > > http://www.xml.com/ldd/chapter/book/index.html
> > >
> > > Hope it helps.
> > > Anders Fugmann
> > >
> > > >
>
> A simple example is the ../kernel/timer.c code. The "run_task_list()"
> function is called from a tasklet. "do_timer()" is called from
> interrupt and "mark_bh(TIMER_BH)" puts the tasklet in the queue.
> "timer_bh()" (old names die hard) is the tasklet.
>
> George
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 23 2001 - 21:00:38 EST