Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo

From: Cliff Albert (cliff@oisec.net)
Date: Mon Aug 20 2001 - 15:45:36 EST


On Mon, Aug 20, 2001 at 02:27:49PM -0600, Justin T. Gibbs wrote:

> >I'm getting similair errors on 2.4.8-ac7 on my P2B-S motherboard using
> >the NEW AIC7xxx driver, the old isn't experiencing these problems. Further
> >i've been getting these errors since 2.4.3.
> >
> >> booting with append="noapic", gives the same errors
>
> Can you send me the full messages when you boot with "aic7xxx=verbose"?
> That should help indicate the source of your problems. I also
> need to see the devices that are attached to the bus, so a full dmesg
> from a successful boot with the old driver would be helpful.

Well booting is successful on my board, but the same errors that almost
everyone is getting are the same i'm getting. I just turned on verbose.

Most debugging info i already send to the linux-kernel mailinglist, i'll
forward it on to you. The verbose info will be send also in about a few
hours.

-- 
Cliff Albert		| RIPE:	     CA3348-RIPE | www.oisec.net
cliff@oisec.net		| 6BONE:     CA2-6BONE	 | icq 18461740
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Aug 23 2001 - 21:00:37 EST