> > With 2.4.8-ac7, I get SCSI errors and the kernel fails to boot. If I
> > compile with APIC enabled and APIC on UP also enabled, it boots
> > cleanly
>
> I'm getting similair errors on 2.4.8-ac7 on my P2B-S motherboard using
> the NEW AIC7xxx driver, the old isn't experiencing these problems. Further
> i've been getting these errors since 2.4.3.
There is a known BIOS irq routing table problem with a large number of Intel
BIOS boards with onboard adaptec controllers. The fact that making it use
the io-apic works suggest this is the same thing.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 23 2001 - 21:00:34 EST