It might be vm related, it might be not, but I get very funny effects when
running:
buffer -S1m -s128k -m32m </dev/hde >/dev/null
(buffer is just a fast read/write buffer reading stdin to stdout, i use it
to check wether all sectors of a disk are readable, it's similar to dd,
which creates the same effects).
The problem is that under 2.4.4, 2.4.5 and 2.4.8pre4, the machine first
reads at about 30mb/s. then, after a few minutes, it stops for small
amounts of time, and, even worse, the system becomes totally sluggish,
even unusable for parts of seconds or even a second (mouse doesn't move,
programs need ages to starte etc...)
Then, after quite some time this behaviour stops, and the command reads
only very very slowly:
procs memory swap io system cpu
r b w swpd free buff cache si so bi bo in cs us sy id
1 0 0 0 3168 327504 51964 0 0 256 0 123 704 0 46 54
2 0 0 0 3168 327504 51964 0 0 256 0 333 1167 0 51 49
1 0 0 0 3168 327504 51964 0 0 256 6 141 740 0 50 50
2 0 0 0 3172 327500 51964 0 0 256 0 110 661 0 50 50
1 0 0 0 3128 327548 51960 0 0 8512 44 470 1595 0 45 55
1 0 0 0 3128 327544 51960 0 0 256 2 394 2071 3 51 46
1 0 0 0 3124 327544 51960 0 0 320 0 164 798 0 50 50
1 0 0 0 3124 327540 51964 0 0 256 8 121 743 0 50 50
1 0 0 0 3124 327540 51964 0 0 1280 0 176 826 0 50 50
1 0 1 0 3120 327544 51964 0 0 320 64 201 858 0 50 50
as you can see, it reads about 256k/s only, but requires 100% cpu (it's a
dual cpu system and idle == 50 means one cpu is tied up):
CPU1 states: 0.0% user, 100.0% system, 0.0% nice, 0.0% idle
Tied up in the kernel, btw. the rest of the system works and is fast.
hdparm reports nothing spectacular:
/dev/hde:
multcount = 16 (on)
I/O support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 1 (on)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 53614/16/63, sectors = 120103200, start = 0
and indeed the disk is still fast:
cerebro:~# hdparm -tT /dev/hde
/dev/hde:
Timing buffer-cache reads: 128 MB in 0.76 seconds =168.42 MB/sec
Timing buffered disk reads: 64 MB in 1.78 seconds = 35.96 MB/sec
this is, btw, WHILE the above buffer command was still running.
any ideas how to proceed with this problem?
--
-----==- |
----==-- _ |
---==---(_)__ __ ____ __ Marc Lehmann +--
--==---/ / _ \/ // /\ \/ / pcg@goof.com |e|
-=====/_/_//_/\_,_/ /_/\_\ XX11-RIPE --+
The choice of a GNU generation |
|
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Aug 15 2001 - 21:00:18 EST