Justin Guyett wrote:
>
> On Wed, 1 Aug 2001 joseph.bueno@trader.com wrote:
>
> > I am currently using a Xircom Ethernet adapter (tulip_cb module) with a
> > 2.4.5 kernel.
> >
> > The only way I have found to make it work is to turn on promiscuous mode
> > (with 'tcpdump -i eth0 -n > /dev/null') after bootup. I can turn it off
> > after a few minutes without problem.
>
> i saw something like that with a wireless ethernet card, but presumed it
> to be something wrong with WAP+multicast, plus it doesn't happen with new
> card firmware.
>
> at any rate, this made my card work, and sounds like it would be better
> than running tcpdump and killing it after a few minutes. the critical
> element in getting things working was getting traffic while the interface
> was in promisc mode (arp replies to wrong mac address maybe?)
>
That's right.
In fact, I generally start a ping to a remote IP address after bootup
and, if I don't get any response (which is always the case), I start
tcpdump and I do some network activity before stopping it.
> ifconfig ethX promisc
> ping -n -c 5 <pick a remote ip>
> ifconfig ethX -promisc
In fact, I ran tcpdump to check what was going on and, since it "solved"
the problem, I didn't check for a better way to do it.
Obviously, your solution is better.
>
> if you have no traffic for a few minutes, it might break again.
Hopefully, there is some periodic network activity on my machine (at
least checking of my POP account), so it doesn't break.
>
> justin
Thanks
-- Joseph Bueno NetClub/Trader.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Aug 07 2001 - 21:00:17 EST