Hello,
I'm trying to get 2.4 to run on a Dell Poweredge 8450, with no luck so
far ..
Below is what I get when I boot a 2.4 kernel (happens in 2.4.3(-ac9)
and 2.4.5(-ac5), 2.2.19 works fine).. I've attached a full boot log and
my config settings .. The settings, and kernels I'm trying (at least
2.4.3-ac9) work on other Dell boxes here, such as the 2450, and 6350
(with same internals, ie the raid (dual channel) + nic)...
Quick spec of the box is:
Dell PowerEdge 8450
4x550 Xeon / 2gig
Onboard Adaptec SCSI
AMI MegaRaid Single Channel 16mb
Dual Port Intel EtherExpress Pro/100+
Any ideas as to why this is happening, are welcome :)
If any more information is needed, it can be provided ...
Thanks,
Terry
.
.
.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PnP: PNP BIOS installation structure at 0xc00f68f0
PnP: PNP BIOS version 1.0, entry at f0000:a611, dseg at 400 Unable to
handle kernel paging request at virtual address 0000ff48 printing eip:
00003c9c *pde = 00000000
Oops: 0002
CPU: 0
EIP: 0068:[<00003c9c>]
EFLAGS: 00010246
eax: 00000001 ebx: 00000002 ecx: 00000001 edx: 00000313
esi: 00000000 edi: 00000000 ebp: c3feff4a esp: c3feff28
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c3fef000)
Stack: 00000000 0000d14e c3feff4a c3feff48 00000002 00000313 00000000
0000028e
ff80997b 00005889 0000d4e0 00008066 d4e0a81e a7ee0000 0000a6ec
0018a6c4
00000018 e4780000 8080c02f 00780000 00780070 ff800002 ffffffff
c3feff88
Call Trace: [<c01e8db0>] [<c01e9668>] [<c01e9084>] [<c0105035>]
[<c01054bc>]
Code: Bad EIP value.
<0>Kernel panic: Attempted to kill init!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jun 07 2001 - 21:00:14 EST