uname-a

Linux es40-06 2.4.2smp #1 SMP Wed May 2 13:58:01 EDT 2001 alpha unknown
 



kernel log with debug=7 passed to modprobe




May  2 16:45:52 es40-06 kernel: 3c59x.c:LK1.1.12 06 Jan 2000  Donald Becker and others. http://www.scyld.com/network/vortex.html $Revision: 1.102.2.46 $
May  2 16:45:52 es40-06 kernel: See Documentation/networking/vortex.txt
May  2 16:45:52 es40-06 kernel: eth0: 3Com PCI 3c905B Cyclone 100baseTx at 0x8400,  00:01:02:d9:94:f0, IRQ 32
May  2 16:45:52 es40-06 kernel:   product code 'CG' rev 00.12 date 09-22-00
May  2 16:45:52 es40-06 kernel:   8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
May  2 16:45:52 es40-06 kernel:   MII transceiver found at address 24, status 786d.
May  2 16:45:52 es40-06 kernel: 3c59x: Wake-on-LAN functions disabled
May  2 16:45:52 es40-06 kernel:   Enabling bus-master transmits and whole-frame receives.
May  2 16:46:07 es40-06 sysctl: error: 'net.ipv4.ip_always_defrag' is an unknown key
May  2 16:46:07 es40-06 sysctl: net.ipv4.ip_forward = 0
May  2 16:46:07 es40-06 sysctl: net.ipv4.conf.all.rp_filter = 1
May  2 16:46:07 es40-06 sysctl: kernel.sysrq = 0
May  2 16:46:07 es40-06 network: Setting network parameters:  succeeded
May  2 16:46:07 es40-06 ifup: SIOCADDRT: Network is unreachable
May  2 16:46:07 es40-06 network: Bringing up interface lo:  succeeded
May  2 16:46:07 es40-06 kernel: eth0: using NWAY autonegotiation
May  2 16:46:07 es40-06 kernel: eth0: MII #24 status 786d, link partner capability 41e1, setting full-duplex.
May  2 16:46:07 es40-06 network: Bringing up interface eth0:  succeeded
May  2 16:47:02 es40-06 ftpd[1225]: FTP LOGIN FROM es40-05.idris.domain [10.1.1.5], toto
May  2 16:47:29 es40-06 kernel: <74 ticks.
May  2 16:47:29 es40-06 kernel: <7tart_xmit()
May  2 16:47:29 es40-06 kernel: < e401.
May  2 16:47:29 es40-06 kernel: <77>eth0: exiting interrupt, status e000.
May  2 16:47:29 es40-06 kernel: t size 66 status 60008042.
May  2 16:47:29 es40-06 kernel: <nterrupt. status=0xe401
May  2 16:47:29 es40-06 kernel: <t()
May  2 16:47:29 es40-06 kernel: <<7>boomerang_rx(): status e001
May  2 16:47:29 es40-06 kernel:  interrupt loop, status e401.
May  2 16:47:29 es40-06 kernel: <7errupt, status e201, latency 3 ticks.
May  2 16:47:29 es40-06 kernel: <_xmit()
May  2 16:47:29 es40-06 kernel: <status e401.
May  2 16:47:29 es40-06 kernel: <rt_xmit()


next line is syslog restart after the freeze of the machine

lspci -vx

00:03.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
        Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
        Flags: bus master, medium devsel, latency 32, IRQ 32
        I/O ports at 8400 [size=128]
        Memory at 000000000a0c3000 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at 000000000a0a0000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 1
00: b7 10 55 90 07 00 10 02 30 00 00 02 10 20 00 00
10: 01 84 00 00 00 30 0c 0a 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 55 90
30: 00 00 0a 0a dc 00 00 00 00 00 00 00 20 01 0a 0a
vortex --aaee

 ./vortex -aaee
vortex-diag.c:v2.04 1/8/2001 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a 3c905B Cyclone 100baseTx adapter at 0x8400.
The Vortex chip may be active, so FIFO registers will not be read.
To see all register values use the '-f' flag.
Initial window 7, registers values by window:
  Window 0: 0000 0000 0000 0000 f5f5 00bf 0000 0000.
  Window 1: FIFO FIFO 0000 0000 0000 0000 0000 2000.
  Window 2: 0100 d902 1a93 0000 0000 0000 000a 4000.
  Window 3: 0000 0180 05ea 0020 000a 0800 0800 6000.
  Window 4: 0000 0000 0000 0cd8 0003 8880 0000 8000.
  Window 5: 1ffc 0000 0000 0600 0807 06ce 06c6 a000.
  Window 6: 0000 0000 0000 0900 1000 0252 0a87 c000.
  Window 7: 0000 0000 0000 0000 0000 0000 0000 e000.
Vortex chip registers at 0x8400
  0x8410: **FIFO** 00000000 00000011 *STATUS*
  0x8420: 00000020 00000000 00080000 00000004
  0x8430: 00000000 234ddcb3 c1d88090 00080004
 Indication enable is 06c6, interrupt enable is 06ce.
 No interrupt sources are pending.
 Transceiver/media interfaces available:  100baseTx 10baseT.
Transceiver type in use:  Autonegotiate.
 MAC settings: full-duplex.
 Station address set to 00:01:02:d9:93:1a.
 Configuration options 000a.
EEPROM contents (64 words, offset 0):
 0x000: 0001 02d9 931a 9055 0135 0048 4743 6d50
 0x008: 2971 0000 0001 02d9 931a 0010 0000 0022
 0x010: 32a2 0000 0000 0180 0000 0000 0000 10b7
 0x018: 9055 000a 0000 0000 0000 0000 0000 0000
 0x020: 0093 0000 0000 0000 0000 0000 0000 0000
 0x028: 0000 0000 0000 0000 0000 0000 0000 0000
 0x030: 0000 0000 0000 0000 0000 0000 0000 0000
 0x038: 0000 0000 0000 0000 0000 0000 0000 0000
 The word-wide EEPROM checksum is 0x71bb.
Parsing the EEPROM of a 3Com Vortex/Boomerang:
 3Com Node Address 00:01:02:D9:93:1A (used as a unique ID only).
 OEM Station address 00:01:02:D9:93:1A (used as the ethernet address).
 Manufacture date (MM/DD/YYYY) 9/21/2000, division H, product CG.
Options: none.
  Vortex format checksum is incorrect (00fb vs. 10b7).
  Cyclone format checksum is correct (0x93 vs. 0x93).
  Hurricane format checksum is correct (0x93 vs. 0x93).