As my original message seems to have disappeared, here a Repost:
-------- Original Message --------
Subject: Re: AHA-154X/1535 not recognized any more
Date: Fri, 20 Apr 2001 14:28:14 +0200 (MEST)
From: Markus Schaber <markus.schaber@student.uni-ulm.de>
To: "Rafael E. Herrera" <raffo@neuronet.pitt.edu>
CC: Markus Schaber <markus.schaber@student.uni-ulm.de>,Alan Cox
<alan@lxorguk.ukuu.org.uk>,Linux Kernel Mailing List
<linux-kernel@vger.kernel.org>
On Wed, 18 Apr 2001, Rafael E. Herrera wrote:
> > lunix:~# isapnp pnpconfig.txt
> > Board 1 has Identity 08 0f 6d b9 45 42 15 90 04: ADP1542 Serial No 258849093 [checksum 08]
> > pnptext:60 -- Fatal - IO range check attempted while device activated
> > pnptext:60 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted
>
> I've a pnp sound card that fails to configure with a similar error
> message when a (CHECK) entry was found in an (IO ...) block. Removing
> those entries solved the problem. Try this in your pnpconfig.txt:
>
> (IO 0 (SIZE 4) (BASE 0x0330))
In this case, isapnp configures the card.
Using a modularized kernel, modprobe also loads the driver without any
further parameters:
lunix:/home/schabi/public_html/scsi# /rescue/sbin/isapnp
pnpconfig_nocheck.txt
Board 1 has Identity 08 0f 6d b9 45 42 15 90 04: ADP1542 Serial No
258849093 [checksum 08]
ADP1542/258849093[0]{SCSI Host Adapter }: Port 0x330; IRQ10 DMA0 ---
Enabled OK
lunix:/home/schabi/public_html/scsi# modprobe aha1542
lunix:/home/schabi/public_html/scsi#
ls /proc/scsi
advansys aha1542 ide-scsi scsi sg
lunix:/home/schabi/public_html/scsi# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: YAMAHA Model: CRW8424S Rev: 1.0j
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: 03.H
Type: Direct-Access ANSI SCSI revision: ffffffff
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: SAMSUNG Model: CD-ROM SCR-3231 Rev: S104
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 06 Lun: 00
Vendor: IOMEGA Model: ZIP 100 PLUS Rev: J.66
Type: Direct-Access ANSI SCSI revision: 02
So the isapnp tools can configure the card correctly.
markus
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Apr 30 2001 - 21:00:10 EST