Linux version 2.4.3-ac12 (root@hawkeye) (gcc version 2.95.4 20010319 (Debian prerelease)) #4 Sun Apr 22 21:08:07 CEST 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007fe0000 (usable)
 BIOS-e820: 0000000007fe0000 - 0000000007ff0000 (ACPI data)
 BIOS-e820: 0000000007ff0000 - 0000000008000000 (reserved)
 BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved)
 BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS)
 BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
On node 0 totalpages: 32736
zone(0): 4096 pages.
zone(1): 28640 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Testkernel ro root=304 BOOT_FILE=/boot/vmlinuz-2.4.3-ac12
Initializing CPU#0
Detected 497.568 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 992.87 BogoMIPS
Memory: 126892k/130944k available (938k kernel code, 3664k reserved, 242k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfee03, last bus=21
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:05.0
PCI: Found IRQ 11 for device 00:0b.0
PCI: The same IRQ used for device 01:00.0
PCI: Found IRQ 11 for device 00:0b.1
PCI: The same IRQ used for device 00:0c.0
  got res[10000000:10000fff] for resource 0 of PCI device 1179:0617
  got res[10001000:10001fff] for resource 0 of PCI device 1179:0617
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 84266kB/28088kB, 256 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 29
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
hda: TOSHIBA MK6014MAP, ATA DISK drive
hdc: CD-224E-B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 11733120 sectors (6007 MB), CHS=730/255/63
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda3 hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
Real Time Clock Driver v1.10d
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
fatfs: bogus cluster size
fatfs: bogus cluster size
reiserfs: checking transaction log (device 03:04) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 64k freed
Adding Swap: 265064k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Linux PCMCIA Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:0b.0
PCI: The same IRQ used for device 01:00.0
PCI: Found IRQ 11 for device 00:0b.1
PCI: The same IRQ used for device 00:0c.0
Yenta IRQ list 04b0, PCI irq11
Socket status: 30000020
Yenta IRQ list 04b0, PCI irq11
Socket status: 30000007
cs: cb_alloc(bus 20): vendor 0x115d, device 0x0003
  got res[1000:107f] for resource 0 of PCI device 115d:0003
  got res[10800000:108007ff] for resource 1 of PCI device 115d:0003
  got res[10800800:10800fff] for resource 2 of PCI device 115d:0003
  got res[10400000:10403fff] for resource 6 of PCI device 115d:0003
PCI: Enabling device 14:00.0 (0000 -> 0003)
  got res[1080:1087] for resource 0 of PCI device 115d:0103
  got res[10801000:108017ff] for resource 1 of PCI device 115d:0103
  got res[10801800:10801fff] for resource 2 of PCI device 115d:0103
  got res[10404000:10407fff] for resource 6 of PCI device 115d:0103
PCI: Enabling device 14:00.1 (0000 -> 0003)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x330-0x337 0x378-0x37f 0x3f8-0x3ff 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
PCI: Setting latency timer of device 14:00.0 to 64
eth0: Xircom cardbus revision 3 at irq 11 
Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
serial_cs: ParseTuple: No more items
usb-uhci.c: $Revision: 1.251 $ time 21:10:52 Apr 22 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:05.2
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
mice: PS/2 mouse device common for all mice
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 8
0x378: readIntrThreshold is 8
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x4b
0x378: ECP settings irq=7 dma=3
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).