(no subject)

From: Vibol Hou (vhou@khmer.cc)
Date: Tue Apr 17 2001 - 19:15:34 EST

Next message: David Relson: "Re: Adaptec 2940 and Linux 2.2.19"
Previous message: Mr. James W. Laferriere: "Re: Is printing broke on sparc ?"
Next in thread: Jaquemet Loic: "Re:"
Reply: Jaquemet Loic: "Re:"
Reply: Francois Cami: "Re:"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

I'm using 2.4.4-pre3 and get this message occasionally when the system is
loaded:

Apr 17 16:10:12 omega kernel: eth0: Too much work in interrupt, status e401.
Apr 17 16:10:12 omega kernel: eth0: Too much work in interrupt, status e401.

The nic is a 3Com 3c905B. Is this a bad thing?

/proc/interrupts:
           CPU0 CPU1
  0: 13167527 12036422 IO-APIC-edge timer
  1: 0 2 IO-APIC-edge keyboard
  2: 0 0 XT-PIC cascade
  4: 22773 19820 IO-APIC-edge
  8: 1 0 IO-APIC-edge rtc
15: 1 4 IO-APIC-edge ide1
17: 50001929 49606064 IO-APIC-level eth0
18: 2459038 2364252 IO-APIC-level aic7xxx
NMI: 0 0
LOC: 25202946 25202942
ERR: 0

-- Vibol Hou KhmerConnection http://khmer.cc

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Next message: David Relson: "Re: Adaptec 2940 and Linux 2.2.19"
Previous message: Mr. James W. Laferriere: "Re: Is printing broke on sparc ?"
Next in thread: Jaquemet Loic: "Re:"
Reply: Jaquemet Loic: "Re:"
Reply: Francois Cami: "Re:"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Mon Apr 23 2001 - 21:00:25 EST