Re: ide.2.2.19.04092001.patch

From: William Park (parkw@better.net)
Date: Wed Apr 11 2001 - 00:46:40 EST


On Tue, Apr 10, 2001 at 10:35:54PM -0700, Shane Wegner wrote:
> Hi,
>
> This isn't working here on my Abit VP6 board. The
> ide.2.2.18.1221 works fine but this latest patch as well as
> ide.2.2.19.0325 fails.
>
> Uniform Multi-Platform E-IDE driver Revision: 6.30
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: IDE controller on PCI bus 00 dev 39
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
> ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
> HPT370: IDE controller on PCI bus 00 dev 70
> HPT370: chipset revision 3
> HPT370: not 100% native mode: will probe irqs later
> ide2: BM-DMA at 0xec00-0xec07, BIOS settings: hde:pio, hdf:pio
> ide3: BM-DMA at 0xec08-0xec0f, BIOS settings: hdg:DMA, hdh:pio
> hda: Maxtor 92720U8, ATA DISK drive
> hdg: Maxtor 96147U8, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide3 at 0xe400-0xe407,0xe802 on irq 10
>
> That's where it stops. Locks solid, not even sysrq-b
> works.

Same here with my VP6. ide-2.2.18 worked, but ide-2.2.19 doesn't.

--William Park, Open Geometry Consulting, Linux/Python/LaTeX/vim, 8 CPUs.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Apr 15 2001 - 21:00:15 EST