Hi,
I got my ATM driver working properly, both LE155 and PCA200E did
good throughput when I found out the problem. I had some fancy option in
BIOS setup described like "Enhance chip performance", after turning this
on everything started to rock. So, my best guess is that there was
something terribly wrong in my PCI or chipset setup and this option fixed
the configuration.
My benchmark results on can be found from
http://www.netsonic.fi/~sampsa/netpipe/ if anyone else is interested on
the results. Based on my benchmark results I would say ForeRunner LE155
and PCA-200E and their Linux drivers seemed to benchmark equally well on
throughput, I have no idea on CPU usage, tho.
Thanks,
Sampsa
> --
> Subject: Performance is weird
> The following message was first posted to linux-atm mailing list, it
> is followed with one of the replies I got, thanks Werner Almesberger
> <Werner.Almesberger@epfl.ch>.
>
> Actually, with 2.4.3pre4 kernel I got something like 66Mbit/s which were
> better than the 2.4.2 results.
> --
>
> Hello,
>
> I am running a set of ForeRunner LE 155 cards on two Athlon 900
> machines. The cards are currently back to back connected. I am having
> problems with performance and this problem seems a bit curious to me.
>
> The boxes are running kernel versions 2.4.2 with the builtin ATM
> functionality.
>
> First when the machine is idle and i run ttcp_atm, the record is:
>
> [root@akvagw test]# ./ttcp_atm -t -a -s 0.90
> ttcp-t: buflen=8192, nbuf=2048, align=16384/0, port=5013 atm -> 0.90
> ttcp-t: socket
> ttcp-t: 16777216 bytes in 3.805066 real seconds = 4305.838585 KB/sec
> (35.273430
> Mb/sec)
>
> I can get the same result when I run it as many times as I want when the
> machine is idle, however, the performance of the increases a lot when I
> give the processor something to do, for example compile the kernel, when
> gcc is compiling the kernel, I get better results:
>
> [root@akvagw test]# ./ttcp_atm -t -a -s 0.90
> ttcp-t: buflen=8192, nbuf=2048, align=16384/0, port=5013 atm -> 0.90
> ttcp-t: socket
> ttcp-t: 16777216 bytes in 0.997561 real seconds = 16424.058278 KB/sec (134.545885 Mb/sec)
>
> For the record, the remote machine does not affect the tests, because the
> machine just sends data even when none listens.
>
> Can someone explain, and maybe do something, please? Or am I supposed to
> compile kernel all the time on my production ATM routers.
>
> Same seems to apply when I stream UDP via my 3C905C card to one of my
> routers, first I get 60Mbytes / s, then 94Mbytes/s when I start to compile
> the kernel.
>
> Thanks,
> Sampsa Ranta
> sampsa@netsonic.fi
>
>
> "
> Don't know where those "negative CPU cycles" come from. It's probably
> a driver problem. Could be that either you're triggering scheduling of a
> softirq or such, where there normally wouldn't be one (but should be),
> or that there's a race condition leading to the loss of an event
> (softirq, tasklet, wait queue, etc.), and background activity makes this
> happen in the correct order.
> "
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to majordomo@vger.kernel.org
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Mar 31 2001 - 21:00:10 EST