Thanks to all for their advice on this problem. So far I've tried
hdparm flags six ways from sunday to no effect, but I have yet to
try suggestions such as those below. Alas I have to set aside this
problem for the next few weeks.
In the mean time, I note that the linux machines at my Lab are being
subjected to fairly severe security attacks at the moment (the latest
involved a hold in the bind DNS server (?) ) - a reminder
to all to keep applying those updates and security patches.
B.D.
On Fri, 23 Mar 2001, David Balazic wrote:
> Brian Dushaw (dushaw@munk.apl.washington.edu) wrote :
>
> > Dear Linux Kernel Wisemen,
> > I have been following the discussion of the VIA vt82c686b chipset
> > and the troubles people have had in getting UDMA(100) to work. This
> > is to report that I have now tried the 2.4.2-ac20 kernel and the
> > 2.2.18 kernel with Andre's patch (dated March 20) and neither of
> > them get the disk speed up to where it ought to be. hdparm -t reports
> > back 11 MB/s or so for either kernel.
> > VIA82CXXX enabled, and I also tried the ide0=ata66 flag, in desparation.
> > At boot up both kernels report the disk as UDMA(100) - everything
> > seems to be peachy keen, but for the sluggish disk performance.
> >
> > Merely a report from the front lines,
> >
> > B.D.
>
> Do you also have IDE_AUTO_WHATEVER option enabled ,
> as suggested ( no, commanded ) in the VIA_IDE_OPTION help text ?
> ( press '?' when selecting the VIA IDE driver option )
>
> cat /proc/ide/via ?
>
> What do you think is the "correct" transfer rate of the disk ?
>
> For the record , I have a MSI K7T Pro2A board ( VIA KT133 with a
> vt82c686b south bridge ) and a IBM DTLA 307045 hard drive on a 80
> wire IDE cable ( set to CABLE-SELECT , connected to the end connector;
> you must always first use both connectors on the end of the cable !
> never left one end unused )
>
> Without doing any settings with hdparm, I get the full transfer rate
> of the disk, measured with hdparm : ~35MB/s
>
>
> kernel is 2.4.recent or redhat recent 2.4.x versions.
>
>
-- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%Brian Dushaw Applied Physics Laboratory University of Washington 1013 N.E. 40th Street Seattle, WA 98105-6698 (206) 685-4198 (206) 543-1300 (206) 543-6785 (fax) dushaw@apl.washington.edu
Web Page: http://staff.washington.edu/dushaw/index.html
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Mar 23 2001 - 21:00:23 EST