On Fri, Mar 16, 2001, Grover, Andrew <andrew.grover@intel.com> wrote:
> This is a preliminary patch against 2.4.2 to uhci.c that puts the host
> controller into global suspend when there are no devices attached. This
> conserves power on mobile systems, and because suspending the host
> controller ceases UHCI's incessant busmastering activity, it allows the CPU
> to enter a deeper idle state.
>
> The main problem with this implementation is that it just looks at the 2
> root hub ports and suspends if nothing is connected. Ideally, it would be
> smart enough to realize it can also suspend when only hubs are present, or
> when all devices on the USB are also suspended. I hope a USB expert can add
> these enhancements, as it's beyond me.
If you want it to be seamless, you really can't do that. USB is a polled
bus, so the HC needs to send something to the device so it tells us that
something has changed, like a device being plugged into a hub (not the root
hub).
> You should be able to verify this patch is working in one of two ways:
> 1) Turn on USB debug messages, and look for suspend_hc and wakeup_hc
> messages
> 2) Download the latest ACPI patch from
> http://developer.intel.com/technology/iapc/acpi/downloads.htm and verify
> that /proc/acpi/processor/0/status shows mostly 0's for busmastering
> activity (as opposed to mostly F's) when no USB devices are connected.
Thanks for the patch. I'll integrate into my patch and send it off to Linus
as well after I run it through it's paces.
It looks good on visual inspection atleast.
JE
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Mar 23 2001 - 21:00:09 EST