>VP_IDE: IDE controller on PCI bus 00 dev 39
>VP_IDE: chipset revision 16
>VP_IDE: not 100% native mode: will probe irqs later
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
>hda: WDC WD205BA, ATA DISK drive
>hdc: TOSHIBA DVD-ROM SD-M1202, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: 40088160 sectors (20525 MB) w/2048KiB Cache, CHS=2495/255/63, UDMA(33)
>hdc: ATAPI 32X DVD-ROM drive, 256kB Cache, DMA
...
>PCI: Found IRQ 10 for device 00:08.0
>PCI: The same IRQ used for device 00:07.2
>PCI: The same IRQ used for device 00:07.3
>3c59x.c:LK1.1.12 06 Jan 2000 Donald Becker and others.
>http://www.scyld.com/network/vortex.html $Revision: 1.102.2.46 $
>See Documentation/networking/vortex.txt
>eth0: 3Com PCI 3c905C Tornado at 0xdc00, 00:01:03:30:0f:3a, IRQ 10
> product code 'HN' rev 00.3 date 11-03-00
> 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
> MII transceiver found at address 24, status 782d.
> Enabling bus-master transmits and whole-frame receives.
...
>PCI: Found IRQ 10 for device 00:07.2
>PCI: The same IRQ used for device 00:07.3
>PCI: The same IRQ used for device 00:08.0
>uhci.c: USB UHCI at I/O 0xd400, IRQ 10
>uhci.c: detected 2 ports
>usb.c: new USB bus registered, assigned bus number 1
>hub.c: USB hub found
>hub.c: 2 ports detected
>PCI: Found IRQ 10 for device 00:07.3
>PCI: The same IRQ used for device 00:07.2
>PCI: The same IRQ used for device 00:08.0
>uhci.c: USB UHCI at I/O 0xd800, IRQ 10
>uhci.c: detected 2 ports
>usb.c: new USB bus registered, assigned bus number 2
>hub.c: USB hub found
>hub.c: 2 ports detected
...
>eth0: using NWAY autonegotiation
>eth0: command 0x2800 took 33590 usecs! Please tell andrewm@uow.edu.au
>hda: DMA disabled
>VFS: Disk change detected on device ide1(22,0)
>hdc: DMA disabled
I suggest moving your network card to a different PCI slot, which should
partially resolve those IRQ conflicts and may improve reliability.
--------------------------------------------------------------
from: Jonathan "Chromatix" Morton
mail: chromi@cyberspace.org (not for attachments)
big-mail: chromatix@penguinpowered.com
uni-mail: j.d.morton@lancaster.ac.uk
The key to knowledge is not to rely on people to teach you it.
Get VNC Server for Macintosh from http://www.chromatix.uklinux.net/vnc/
-----BEGIN GEEK CODE BLOCK-----
Version 3.12
GCS$/E/S dpu(!) s:- a20 C+++ UL++ P L+++ E W+ N- o? K? w--- O-- M++$ V? PS
PE- Y+ PGP++ t- 5- X- R !tv b++ DI+++ D G e+ h+ r- y+
-----END GEEK CODE BLOCK-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Mar 07 2001 - 21:00:21 EST