On Tue, 6 Mar 2001, Vojtech Pavlik wrote:
> On Tue, Mar 06, 2001 at 10:09:05AM +0100, Mike Galbraith wrote:
>
> > The driver forget what it always called a vt82c596b before. Reverting
> > the below brought it back on-line, and all seems well again. (hope I
> > don't receive any unpleasant suprises.. I've not the foggiest clue what
> > that number means;)
> >
> > - { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x12, 0x2f, VIA_UDMA_66 },
> > + { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 },
>
> Can you verify it's a 596b and not 596a? Preferably by looking on the
> chip? This change was brought in because I wasn't sure for the 10 and 11
> revisions. 586a doesn't have a functional UDMA66 engine and causes
> crashes if programmed to UDMA66.
*blur* SQUINT (I _definitely_ need new glasses) it's a 596b.
Probably dumb question wrt hdparm -i output...
/dev/hda:
Model=IBM-DJNA-352030, FwRev=J58OA30K, SerialNo=GQ0GQFP8740
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34
BuffType=DualPortCache, BuffSize=1966kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39876480
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Why is it defaulting to udma4, and :) why the heck does it work?
-Mike
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Mar 07 2001 - 21:00:19 EST