On Fri, 2 Mar 2001, Stéphane GARIN wrote:
> Hi,
>
> I have a kernel panic with the patch 2.2.19pre16 that I test. I use a 2.2.18
> Kernel very well. I used the last patch on this kernel and make my kernel
> with sames parameters without error message. At the boot, I can see this :
>
> ...
> eth0: RealTek RTL8139 Fast Ethernet at 0xa800, IRQ 10, 00:50:fc:0b:60:70
> eth1: RealTek RTL8139 Fast Ethernet at 0xac00, IRQ 11, 00:50:fc:1f:c1:98
> Partition check:
> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
> Trying to vfree() noexistent vm area (c00f0000)
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 68k freed
> Kernel panic: No init found. Try passing init= option to kernel.
>
I get similar messages on 2.4.2 and 2.4.2-ac7 :
...
ACPI: Core Subsystem version [20010208]
ACPI: Subsystem enabled
ACPI: System firmware supports: C2 C3
ACPI: plvl2lat=10 plvl3lat=20
ACPI: C2 enter=143 C2 exit=35
ACPI: C3 enter=858 C3 exit=71
ACPI: Not using ACPI idle
ACPI: System firmware supports: S0 S1 S5
ACPI: If experiencing system slowdowns, pass acpi=no-idle #FROM MEMORY
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 232k freed
Kernel panic: No init found. Try passing init= option to kernel.
The solution was to pass acpi=no-idle on the kernel command line. The same
configuration worked fine with 2.4.1
Jason
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Mar 07 2001 - 21:00:14 EST