Re: VIA VT82C686X

From: Andre Hedrick (andre@linux-ide.org)
Date: Wed Jan 31 2001 - 01:49:26 EST


On Tue, 30 Jan 2001, David D.W. Downey wrote:

>
> Woohoo! Just found out that ATA66 on the VIA aint too great.
>
> I set the kernel boot options idebus=66 ide0=ata66 enabling ATA66

Sorry but you are not right in this world .......

Where in you manual does is "QUOTE" you can drive the ATA/IDE bus at 66MHz?

> according to dmesg. The HDD is a WDC UDMA100 30.5GB drive. I retried the
>
> dd if=/dev/hda7 of=/tmp/testing2.img bs=1024k count=2000
>
> on one VT, ran renice -20 on the dd process then ran procinfo on another
> and top on a 3rd. I logged into a fourth and ran sync;sync;sync;sync;sync.
>
> After @30 seconds the machine became totally unresponsive, locking up all
> but the current VT.
>
> I let it sit there and waited until the dd finished in case the renice was
> what killed the control. When dd finished I tried running any type of
> command but the tty was completely frozen. All other VTs were non
> responsive as well.
>
>
> This is gonna be fun when I test the Promise controller. hehe
>
>
> David D.W. Downey
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
>

Andre Hedrick
Linux ATA Development

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Wed Jan 31 2001 - 21:00:37 EST