> > Throughput: 100Mbps is really nothing. Linux never had a problem with
> > 4-500Mbps file serving. So throughput is an important number. so is
> > end to end latency, but in file serving case, latency might
> > not be a big deal so ignore it.
>
> If I try to route more than 40mbps (40% line utilization) through a 100mbps
> port (tulip) on a 2.4.0-test kernel running on a pIII 500 (or higher)
> system, not only does the performance drop to nearly 0, the system gets all
> sluggish and unusable. This is with or without Jamal's FF patches.
>
> How are you managing to get such high throughput?
>
I have used 2.2.13 to 2.2.18 and 2.4.0, for first approach, with no
patches and with no probles I managed bandwidth about 200 and 300 Mbps
Antonin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jan 31 2001 - 21:00:32 EST