Re: No SCSI Ultra 160 with Adaptec Controller

From: Tim Sullivan (tsulliva@iex.net)
Date: Wed Jan 24 2001 - 10:20:01 EST


Matt_Domsch@Dell.com wrote:
>
> > Justin's 6.0.9beta(latest release) hasn't corrected the problem yet.
> >
> > scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.0.9 BETA
> > <Adaptec 29160 Ultra160 SCSI adapter>
> > aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs
> >
> > Vendor: QUANTUM Model: ATLAS10K2-TY367L Rev: DDD6
> > Type: Direct-Access ANSI SCSI revision: 03
> > (scsi0:A:0): async, 8bit
> > scsi0:0:0:0: Tagged Queuing enabled. Depth 8
> > Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
> > (scsi0:A:0): async, 16bit
> > (scsi0:A:0): synchronous at 80.0MHz DT, offset 0x7f, 16bit
> > SCSI device sda: 71721820 512-byte hdwr sectors (36722 MB)
>
> I could still be wrong, but 80 MHz * 16 bits (2 bytes) = 160 MB/sec.
> We are testing Justin's driver internally. I'll grab our SCSI disk guys and
> make sure it's up to speed.
>
> Thanks,
> Matt

My apologies, you're right of course :-) I was seeing MHz and thinking
MB!

Thanks,
tim
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Wed Jan 31 2001 - 21:00:18 EST