Re: PROBLEM: SCSI hangs with aic7xxx in 2.4.0 SMP

From: mull (mullein@mullein.org)
Date: Sat Jan 06 2001 - 19:43:03 EST


On Sat, Jan 06, 2001 at 09:26:55PM -0000, Craig Freeze wrote:
> [1.] One line summary of the problem:
> SCSI hangs with aic7xxx in 2.4.0 SMP
>
> [2.] Full description of the problem/report:
> SCSI device errors and bus resets observed in 2.4.0 that do not occur in
> 2.2.13. Sysrq keys have no effect (ie hard reset required to recover)
>
I've noticed pretty much the same situation on my uniproc box, aic7xxx driver, adaptec 2940uw card since going to 2.4.0-prerelease. haven't had to hard reset, but have seen a LOT of scsi timeout errors. i did not notice this on 2.4.0-test12 or test13pre2. when i'm at home i'll see if i can find any pattern or more info, and also test with 2.4.0 final.
mullein
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Jan 07 2001 - 21:00:26 EST