> Kindly let me know in which part comes the IDE, ext2 and ELF after
> running the command make menuconfig.
Oh come on, these things aren't *that* hard to find. In any case,
judging from the device number 08:01, I suspect you are using SCSI
rather than IDE. Check your SCSI options. You must compile in (not as
modules) the SCSI disk driver as well as your host adapter.
If you are indeed using IDE, make sure you are passing the correct root
dev into the booting kernel. Check your boot loader config (lilo.conf,
likely as not) or try the 'rdev' utility.
Peter
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jan 07 2001 - 21:00:21 EST