[root@dugite /root]# sfdisk -l /dev/sda
ll_rw_block: device 08:00: only 2048-char blocks implemented (1024)
kernel BUG at buffer.c:765!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c012f0cd>]
EFLAGS: 00010282
eax: 0000001c ebx: c1b91ac8 ecx: c029ca68 edx: c029ca68
esi: 00000001 edi: 00000001 ebp: c1f55f2c esp: c1f55ef0
ds: 0018 es: 0018 ss: 0018
Process sfdisk (pid: 1323, stackpage=c1f55000)
Stack: c024aba5 c024ae5a 000002fd c1b91a80 c017a4c4 c1b91a80 00000000 00000000
bffffaa8 c1f55f78 c1215400 c012f663 00000000 00000001 c1f55f2c c1b91a80
c01c8a68 00000800 00000000 00000400 00000000 bffffaa8 bffffaa8 00000800
Call Trace: [<c024aba5>] [<c024ae5a>] [<c017a4c4>] [<c012f663>] [<c01c8a68>] [<c01ce84e>] [<c01349b1>]
[<c013ad96>] [<c010a933>]
Code: 0f 0b 83 c4 0c 5b c3 55 57 56 53 8b 74 24 14 8b 54 24 18 85
eth0: Abnormal interrupt, status 00000051.
eth0: Abnormal interrupt, status 00000010.
eth0: Abnormal interrupt, status 00000020.
Segmentation fault
[root@dugite /root]# uname -a
Linux dugite 2.4.0-test12 #11 Wed Dec 20 16:28:41 WST 2000 i586 unknown
[root@dugite /root]#
lspci says:
00:0b.0 SCSI storage controller: Adaptec AHA-294x / AIC-7871 (rev 03)
relevant kernel boot-time messages
Dec 28 15:10:13 dugite kernel: PCI: Found IRQ 10 for device 00:0b.0
Dec 28 15:10:13 dugite kernel: (scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 0/11/0
Dec 28 15:10:13 dugite kernel: (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
Dec 28 15:10:13 dugite kernel: (scsi0) Downloading sequencer code... 415 instructions downloaded
Dec 28 15:10:13 dugite kernel: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
Dec 28 15:10:13 dugite kernel: <Adaptec AHA-294X SCSI host adapter>
Dec 28 15:10:13 dugite kernel: (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 10.
Dec 28 15:10:13 dugite kernel: Vendor: FUJITSU Model: M2513A Rev: 1200
Dec 28 15:10:13 dugite kernel: Type: Direct-Access ANSI SCSI revision: 01
Dec 28 15:10:13 dugite kernel: (scsi0:0:4:0) Synchronous at 5.0 Mbyte/sec, offset 15.
Dec 28 15:10:13 dugite kernel: Vendor: CONNER Model: CTT8000-S Rev: 1.17
Dec 28 15:10:13 dugite kernel: Type: Sequential-Access ANSI SCSI revision: 02
Dec 28 15:10:13 dugite kernel: Detected scsi tape st0 at scsi0, channel 0, id 4, lun 0
Dec 28 15:10:13 dugite kernel: st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16.
Dec 28 15:10:13 dugite kernel: Detected scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Dec 28 15:10:13 dugite kernel: SCSI device sda: 310352 2048-byte hdwr sectors (636 MB)
Dec 28 15:10:13 dugite kernel: sda: Write Protect is off
Dec 28 15:10:13 dugite kernel: sda: sda1
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Dec 31 2000 - 21:00:12 EST