Hello Alan,
As previously discussed, I've slighlty arranged the version identification
code in the 2.2.18 megaraid driver so that it correcly sees bios and firmware
versions on a netraid. Without the patch, I only get smileys and hieroglyphs
because the version is interpreted as a string which it is not, on the netraid.
On the netraid I have here, the fourth byte in the version is always 0x20, which
I used to identify the version coding because on a megaraid, I have a number
here instead. I'd like people who also have a netraid to test if this is enough
to catch their bios and firmware releases too.
Here comes the small patch. Please note that I extended the version length to
8 bytes to conform to the syntax the bios uses : letter.2digits.2digits
The old undefined code under #ifdef HP has been removed since it was buggy
anyway (char >> 8 always gives 0 ...)
Regards,
Willy
--- linux/drivers/scsi/megaraid.h-orig Wed Dec 27 16:08:26 2000
+++ linux/drivers/scsi/megaraid.h Wed Dec 27 16:08:00 2000
@@ -639,8 +639,8 @@
u32 nWriteBlocks[FC_MAX_LOGICAL_DRIVES];
u32 nInterrupts;
/* Host adapter parameters */
- u8 fwVer[7];
- u8 biosVer[7];
+ u8 fwVer[8];
+ u8 biosVer[8];
struct Scsi_Host *host;
--- linux/drivers/scsi/megaraid.c-orig Wed Dec 27 13:22:27 2000
+++ linux/drivers/scsi/megaraid.c Wed Dec 27 16:02:27 2000
@@ -1767,27 +1767,25 @@
if (megaCfg->host->can_queue >= MAX_COMMANDS) {
megaCfg->host->can_queue = MAX_COMMANDS-1;
}
+ if ((megaCfg->productInfo.FwVer[3] == 0x20) &&
+ (megaCfg->productInfo.BiosVer[3] == 0x20)) {
+ /* use HP firmware and bios version encoding */
+ sprintf (megaCfg->fwVer, "%c.%02x.%02x",
+ megaCfg->productInfo.FwVer[2],
+ megaCfg->productInfo.FwVer[1],
+ megaCfg->productInfo.FwVer[0]);
+ sprintf (megaCfg->biosVer, "%c.%02x.%02x",
+ megaCfg->productInfo.BiosVer[2],
+ megaCfg->productInfo.BiosVer[1],
+ megaCfg->productInfo.BiosVer[0]);
+ }
+ else {
+ memcpy (megaCfg->fwVer, (char *)megaCfg->productInfo.FwVer, 4);
+ megaCfg->fwVer[4] = 0;
-#ifdef HP /* use HP firmware and bios version encoding */
- sprintf (megaCfg->fwVer, "%c%d%d.%d%d",
- megaCfg->productInfo.FwVer[2],
- megaCfg->productInfo.FwVer[1] >> 8,
- megaCfg->productInfo.FwVer[1] & 0x0f,
- megaCfg->productInfo.FwVer[2] >> 8,
- megaCfg->productInfo.FwVer[2] & 0x0f);
- sprintf (megaCfg->biosVer, "%c%d%d.%d%d",
- megaCfg->productInfo.BiosVer[2],
- megaCfg->productInfo.BiosVer[1] >> 8,
- megaCfg->productInfo.BiosVer[1] & 0x0f,
- megaCfg->productInfo.BiosVer[2] >> 8,
- megaCfg->productInfo.BiosVer[2] & 0x0f);
-#else
- memcpy (megaCfg->fwVer, (char *)megaCfg->productInfo.FwVer, 4);
- megaCfg->fwVer[4] = 0;
-
- memcpy (megaCfg->biosVer, (char *)megaCfg->productInfo.BiosVer, 4);
- megaCfg->biosVer[4] = 0;
-#endif
+ memcpy (megaCfg->biosVer, (char *)megaCfg->productInfo.BiosVer, 4);
+ megaCfg->biosVer[4] = 0;
+ }
printk ("megaraid: [%s:%s] detected %d logical drives" CRLFSTR,
megaCfg->fwVer,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Dec 31 2000 - 21:00:10 EST