Hi!
Kernel 2.4.0-test13-pre4 (without any patches) does not see some of the PCI
devices with my setup here. The machine is a IBM Netfinity 7100 Quad-Xeon with
a Serverworks Chipset.
The RAID-Controller (a IBM ServeRAID-4L) is not detected. Kernel 2.2.17
detects it. I also checked -test10 and -test12 kernels which suffer the same
problem.
$ lspci
00:00.0 Host bridge: ServerWorks CNB20HE (rev 21)
00:00.1 Host bridge: ServerWorks CNB20HE (rev 01)
00:00.2 Host bridge: ServerWorks: Unknown device 0006
00:00.3 Host bridge: ServerWorks: Unknown device 0006
00:01.0 SCSI storage controller: Adaptec 7896
00:01.1 SCSI storage controller: Adaptec 7896
00:05.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet LANCE] (rev 44)
00:06.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01)
00:0f.0 ISA bridge: ServerWorks OSB4 (rev 4f)
00:0f.1 IDE interface: ServerWorks: Unknown device 0211
00:0f.2 USB Controller: ServerWorks: Unknown device 0220 (rev 04)
$ lspci -vv -s 00:00.0
00:00.0 Host bridge: ServerWorks CNB20HE (rev 21)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
$ lspci -vv -s 00:00.1
00:00.1 Host bridge: ServerWorks CNB20HE (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 96, cache line size 08
$ lspci -vv -s 00:00.2
00:00.2 Host bridge: ServerWorks: Unknown device 0006
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
$ lspci -vv -s 00:00.3
00:00.3 Host bridge: ServerWorks: Unknown device 0006
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Additional output when using a 2.2.17 kernel (actually it's a 2.2.17pre6-1
kernel coming with the Debian 2.2r0-boot-disks):
02:06.0 RAID bus controller: IBM: Unknown device 01bd
Subsystem: IBM: Unknown device 01bf
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 96 set, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f6ffe000 (32-bit, prefetchable)
$ uname -r
2.2.17
$ dmesg | grep -i pci
PCI: PCI BIOS revision 2.10 entry at 0xfd5cc
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:00 [1166/0008]: Scanning peer host bridges
PCI: Scanning ServerWorks HE/LE Peer Bus Bridge 00/00
PCI: 00:01 [1166/0008]: Scanning peer host bridges
PCI: Scanning ServerWorks HE/LE Peer Bus Bridge 00/01
PCI_IDE: unknown IDE controller on PCI bus 00 device 79, VID=1166, DID=0211
PCI_IDE: not 100% native mode: will probe irqs later
(scsi0) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/1/0
(scsi1) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/1/1
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4
pcnet32.c: PCI bios is present, checking for devices...
Found PCnet/PCI at 0x2200, irq 11.
$ uname -r
2.4.0-test13-pre4
$ dmesg | grep -i pci
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is PCI
Bus #3 is PCI
Bus #4 is PCI
Bus #5 is PCI
Bus #6 is PCI
PCI: PCI BIOS revision 2.10 entry at 0xfd5cc, last bus=6
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ServerWorks host bridge: secondary bus 01
PCI: ServerWorks host bridge: secondary bus 00
PCI->APIC IRQ transform: (B0,I1,P0) -> 17
PCI->APIC IRQ transform: (B0,I1,P0) -> 17
PCI->APIC IRQ transform: (B0,I5,P0) -> 16
PCI->APIC IRQ transform: (B0,I15,P0) -> 26
ServerWorks OSB4: IDE controller on PCI bus 00 dev 79
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
pcnet32_probe_pci: found device 0x001022.0x002000
(scsi0) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/1/0
(scsi1) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/1/1
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
I plugged an additional nic (tulip) into the same bus but it is not detected as
well.
Any hints?
Adam
-- Adam al10@inf.tu-dresden.de Lackorzynski http://a.home.dhs.org - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Dec 31 2000 - 21:00:09 EST