Here is a third update for the winbond driver:
* tx_timeout implemented, the driver now actually recovers from timeouts
;-)
* tx fifo underrun code modified
* further cleanups
The driver is stable under high load, please give it a try.
I'll submit it to Linus in a few days if I get some positive reports.
-- Manfred
--- 2.4/drivers/net/winbond-840.c Sun Dec 17 18:03:56 2000 +++ build-2.4/drivers/net/winbond-840.c Tue Dec 26 17:17:21 2000 @@ -21,11 +21,25 @@ Do not change the version information unless an improvement has been made. Merely removing my name, as Compex has done in the past, does not count as an improvement. + + Changelog: + * ported to 2.4 + ??? + * spin lock update, memory barriers, new style dma mappings + limit each tx buffer to < 1024 bytes + remove bogus DescIntr from Rx descriptors + remove bogus next pointer from Tx descriptors + software reset in tx_timeout + Manfred Spraul + + TODO: + * according to the documentation, the chip supports big endian + internally. Replace the cpu_to_le32 with that bit. */ /* These identify the driver base version and may not be removed. */ static const char version1[] = -"winbond-840.c:v1.01 5/15/2000 Donald Becker <becker@scyld.com>\n"; +"winbond-840.c:v1.01 (2.4 port) 5/15/2000 Donald Becker <becker@scyld.com>\n"; static const char version2[] = " http://www.scyld.com/network/drivers.html\n"; @@ -81,6 +95,8 @@ #define TX_FIFO_SIZE (2048) #define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16) +#define TX_BUFLIMIT (1024-128) + /* Operational parameters that usually are not changed. */ /* Time in jiffies before concluding the transmitter is hung. */ #define TX_TIMEOUT (2*HZ) @@ -113,12 +129,7 @@ #include <asm/processor.h> /* Processor type for cache alignment. */ #include <asm/bitops.h> #include <asm/io.h> - -/* Condensed operations for readability. - The compatibility defines are in kern_compat.h */ - -#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr)) -#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr)) +#include <asm/delay.h> MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver"); @@ -280,7 +291,7 @@ s32 status; s32 length; u32 buffer1; - u32 next_desc; + u32 buffer2; }; struct w840_tx_desc { @@ -293,14 +304,21 @@ enum desc_status_bits { DescOwn=0x80000000, DescEndRing=0x02000000, DescUseLink=0x01000000, DescWholePkt=0x60000000, DescStartPkt=0x20000000, DescEndPkt=0x40000000, +}; + +/* Bits in w840_tx_desc.length */ +enum desc_length_bits { DescIntr=0x80000000, }; #define PRIV_ALIGN 15 /* Required alignment mask */ struct netdev_private { - /* Descriptor rings first for alignment. */ - struct w840_rx_desc rx_ring[RX_RING_SIZE]; - struct w840_tx_desc tx_ring[TX_RING_SIZE]; + struct w840_rx_desc *rx_ring; + dma_addr_t rx_addr[RX_RING_SIZE]; + struct w840_tx_desc *tx_ring; + dma_addr_t tx_addr[RX_RING_SIZE]; + dma_addr_t ring_dma_addr; + struct pci_dev *pdev; /* The addresses of receive-in-place skbuffs. */ struct sk_buff* rx_skbuff[RX_RING_SIZE]; /* The saved address of a sent-in-place packet/buffer, for later free(). */ @@ -334,13 +352,15 @@ static int netdev_open(struct net_device *dev); static void check_duplex(struct net_device *dev); static void netdev_timer(unsigned long data); +static void init_rxtx_rings(struct net_device *dev); +static void free_rxtx_rings(struct netdev_private *np); +static void init_registers(struct net_device *dev); static void tx_timeout(struct net_device *dev); -static void init_ring(struct net_device *dev); +static int alloc_ring(struct net_device *dev); static int start_tx(struct sk_buff *skb, struct net_device *dev); static void intr_handler(int irq, void *dev_instance, struct pt_regs *regs); static void netdev_error(struct net_device *dev, int intr_status); static int netdev_rx(struct net_device *dev); -static void netdev_error(struct net_device *dev, int intr_status); static inline unsigned ether_crc(int length, unsigned char *data); static void set_rx_mode(struct net_device *dev); static struct net_device_stats *get_stats(struct net_device *dev); @@ -364,6 +384,11 @@ return -EIO; pci_set_master(pdev); + if(!pci_dma_supported(pdev,0xFFFFffff)) { + printk(KERN_WARNING "Winbond-840: Device %s disabled due to DMA limitations.\n", + pdev->name); + return -EIO; + } dev = init_etherdev(NULL, sizeof(*np)); if (!dev) return -ENOMEM; @@ -403,6 +428,7 @@ np = dev->priv; np->chip_id = chip_idx; np->drv_flags = pci_id_tbl[chip_idx].drv_flags; + np->pdev = pdev; spin_lock_init(&np->lock); pdev->driver_data = dev; @@ -632,60 +658,12 @@ printk(KERN_DEBUG "%s: w89c840_open() irq %d.\n", dev->name, dev->irq); - init_ring(dev); - - writel(virt_to_bus(np->rx_ring), ioaddr + RxRingPtr); - writel(virt_to_bus(np->tx_ring), ioaddr + TxRingPtr); - - for (i = 0; i < 6; i++) - writeb(dev->dev_addr[i], ioaddr + StationAddr + i); - - /* Initialize other registers. */ - /* Configure the PCI bus bursts and FIFO thresholds. - 486: Set 8 longword cache alignment, 8 longword burst. - 586: Set 16 longword cache alignment, no burst limit. - Cache alignment bits 15:14 Burst length 13:8 - 0000 <not allowed> 0000 align to cache 0800 8 longwords - 4000 8 longwords 0100 1 longword 1000 16 longwords - 8000 16 longwords 0200 2 longwords 2000 32 longwords - C000 32 longwords 0400 4 longwords - Wait the specified 50 PCI cycles after a reset by initializing - Tx and Rx queues and the address filter list. */ -#if defined(__powerpc__) /* Big-endian */ - writel(0x00100080 | 0xE010, ioaddr + PCIBusCfg); -#elif defined(__alpha__) - writel(0xE010, ioaddr + PCIBusCfg); -#elif defined(__i386__) -#if defined(MODULE) - writel(0xE010, ioaddr + PCIBusCfg); -#else - /* When not a module we can work around broken '486 PCI boards. */ -#define x86 boot_cpu_data.x86 - writel((x86 <= 4 ? 0x4810 : 0xE010), ioaddr + PCIBusCfg); - if (x86 <= 4) - printk(KERN_INFO "%s: This is a 386/486 PCI system, setting cache " - "alignment to %x.\n", dev->name, - (x86 <= 4 ? 0x4810 : 0x8010)); -#endif -#else - writel(0xE010, ioaddr + PCIBusCfg); -#warning Processor architecture undefined! -#endif - - if (dev->if_port == 0) - dev->if_port = np->default_port; + if((i=alloc_ring(dev))) + return i; - writel(0, ioaddr + RxStartDemand); - np->csr6 = 0x20022002; - check_duplex(dev); - set_rx_mode(dev); + init_registers(dev); netif_start_queue(dev); - - /* Clear and Enable interrupts by setting the interrupt mask. */ - writel(0x1A0F5, ioaddr + IntrStatus); - writel(0x1A0F5, ioaddr + IntrEnable); - if (debug > 2) printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name); @@ -733,15 +711,149 @@ "config %8.8x.\n", dev->name, (int)readl(ioaddr + IntrStatus), (int)readl(ioaddr + NetworkConfig)); + spin_lock_irq(&np->lock); check_duplex(dev); if (np->csr6 != old_csr6) { writel(np->csr6 & ~0x0002, ioaddr + NetworkConfig); writel(np->csr6 | 0x2002, ioaddr + NetworkConfig); } + spin_unlock_irq(&np->lock); np->timer.expires = jiffies + next_tick; add_timer(&np->timer); } +static void init_rxtx_rings(struct net_device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + int i; + + np->rx_head_desc = &np->rx_ring[0]; + np->tx_ring = (struct w840_tx_desc*)&np->rx_ring[RX_RING_SIZE]; + + /* Initial all Rx descriptors. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].length = cpu_to_le32(np->rx_buf_sz); + np->rx_ring[i].status = 0; + np->rx_skbuff[i] = 0; + } + /* Mark the last entry as wrapping the ring. */ + np->rx_ring[i-1].length |= cpu_to_le32(DescEndRing); + + /* Fill in the Rx buffers. Handle allocation failure gracefully. */ + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz); + np->rx_skbuff[i] = skb; + if (skb == NULL) + break; + skb->dev = dev; /* Mark as being used by this device. */ + np->rx_addr[i] = pci_map_single(np->pdev,skb->tail, + skb->len,PCI_DMA_FROMDEVICE); + + np->rx_ring[i].buffer1 = cpu_to_le32(np->rx_addr[i]); + np->rx_ring[i].status = cpu_to_le32(DescOwn); + } + + np->cur_rx = 0; + np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); + + /* Initialize the Tx descriptors */ + for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_skbuff[i] = 0; + np->tx_ring[i].status = 0; + } + np->tx_full = 0; + np->tx_q_bytes = np->dirty_tx = np->cur_tx = 0; + + writel(np->ring_dma_addr, dev->base_addr + RxRingPtr); + writel(np->ring_dma_addr+sizeof(struct w840_rx_desc)*RX_RING_SIZE, + dev->base_addr + TxRingPtr); + +} + +static void free_rxtx_rings(struct netdev_private* np) +{ + int i; + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].status = 0; + if (np->rx_skbuff[i]) { + pci_unmap_single(np->pdev, + np->rx_addr[i], + np->rx_skbuff[i]->len, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(np->rx_skbuff[i]); + } + np->rx_skbuff[i] = 0; + } + for (i = 0; i < TX_RING_SIZE; i++) { + if (np->tx_skbuff[i]) { + pci_unmap_single(np->pdev, + np->tx_addr[i], + np->tx_skbuff[i]->len, + PCI_DMA_TODEVICE); + dev_kfree_skb(np->tx_skbuff[i]); + } + np->tx_skbuff[i] = 0; + } +} + +static void init_registers(struct net_device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + int i; + + for (i = 0; i < 6; i++) + writeb(dev->dev_addr[i], ioaddr + StationAddr + i); + + /* Initialize other registers. */ + /* Configure the PCI bus bursts and FIFO thresholds. + 486: Set 8 longword cache alignment, 8 longword burst. + 586: Set 16 longword cache alignment, no burst limit. + Cache alignment bits 15:14 Burst length 13:8 + 0000 <not allowed> 0000 align to cache 0800 8 longwords + 4000 8 longwords 0100 1 longword 1000 16 longwords + 8000 16 longwords 0200 2 longwords 2000 32 longwords + C000 32 longwords 0400 4 longwords + Wait the specified 50 PCI cycles after a reset by initializing + Tx and Rx queues and the address filter list. */ +#if defined(__powerpc__) /* Big-endian */ + writel(0x00100080 | 0xE010, ioaddr + PCIBusCfg); +#elif defined(__alpha__) + writel(0xE010, ioaddr + PCIBusCfg); +#elif defined(__i386__) +#if defined(MODULE) + writel(0xE010, ioaddr + PCIBusCfg); +#else + /* When not a module we can work around broken '486 PCI boards. */ +#define x86 boot_cpu_data.x86 + writel((x86 <= 4 ? 0x4810 : 0xE010), ioaddr + PCIBusCfg); + if (x86 <= 4) + printk(KERN_INFO "%s: This is a 386/486 PCI system, setting cache " + "alignment to %x.\n", dev->name, + (x86 <= 4 ? 0x4810 : 0x8010)); +#endif +#else + writel(0xE010, ioaddr + PCIBusCfg); +#warning Processor architecture undefined! +#endif + + if (dev->if_port == 0) + dev->if_port = np->default_port; + + /* Fast Ethernet; 128 byte Tx threshold; + Transmit on; Receive on; */ + np->csr6 = 0x20022002; + check_duplex(dev); + set_rx_mode(dev); + writel(0, ioaddr + RxStartDemand); + + /* Clear and Enable interrupts by setting the interrupt mask. */ + writel(0x1A0F5, ioaddr + IntrStatus); + writel(0x1A0F5, ioaddr + IntrEnable); + +} + static void tx_timeout(struct net_device *dev) { struct netdev_private *np = (struct netdev_private *)dev->priv; @@ -758,70 +870,61 @@ printk(" %8.8x", (unsigned int)np->rx_ring[i].status); printk("\n"KERN_DEBUG" Tx ring %8.8x: ", (int)np->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x", np->tx_ring[i].status); + printk(" %8.8x", np->tx_ring[i].status); printk("\n"); } + printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d.\n", + np->cur_tx, np->dirty_tx, np->tx_full,np->tx_q_bytes); + printk(KERN_DEBUG "Tx Descriptor addr %lxh.\n",readl(ioaddr+0x4C)); + #endif + spin_lock_irq(&np->lock); + /* + * Under high load dirty_tx and the internal tx descriptor pointer + * come out of sync, thus perform a software reset and reinitialize + * everything. + */ + + writel(1, dev->base_addr+PCIBusCfg); + udelay(10); + + free_rxtx_rings(np); - /* Perhaps we should reinitialize the hardware here. Just trigger a - Tx demand for now. */ - writel(0, ioaddr + TxStartDemand); - dev->if_port = 0; - /* Stop and restart the chip's Tx processes . */ + init_rxtx_rings(dev); + + init_registers(dev); + + netif_wake_queue(dev); + spin_unlock_irq(&np->lock); dev->trans_start = jiffies; np->stats.tx_errors++; return; } - /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static void init_ring(struct net_device *dev) +static int alloc_ring(struct net_device *dev) { struct netdev_private *np = (struct netdev_private *)dev->priv; - int i; - - np->tx_full = 0; - np->tx_q_bytes = np->cur_rx = np->cur_tx = 0; - np->dirty_rx = np->dirty_tx = 0; np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); - np->rx_head_desc = &np->rx_ring[0]; - - /* Initial all Rx descriptors. */ - for (i = 0; i < RX_RING_SIZE; i++) { - np->rx_ring[i].length = cpu_to_le32(np->rx_buf_sz); - np->rx_ring[i].status = 0; - np->rx_ring[i].next_desc = virt_to_le32desc(&np->rx_ring[i+1]); - np->rx_skbuff[i] = 0; - } - /* Mark the last entry as wrapping the ring. */ - np->rx_ring[i-1].length |= cpu_to_le32(DescEndRing); - np->rx_ring[i-1].next_desc = virt_to_le32desc(&np->rx_ring[0]); - - /* Fill in the Rx buffers. Handle allocation failure gracefully. */ - for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz); - np->rx_skbuff[i] = skb; - if (skb == NULL) - break; - skb->dev = dev; /* Mark as being used by this device. */ - np->rx_ring[i].buffer1 = virt_to_le32desc(skb->tail); - np->rx_ring[i].status = cpu_to_le32(DescOwn | DescIntr); - } - np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); - for (i = 0; i < TX_RING_SIZE; i++) { - np->tx_skbuff[i] = 0; - np->tx_ring[i].status = 0; - } - return; + np->rx_ring = pci_alloc_consistent(np->pdev, + sizeof(struct w840_rx_desc)*RX_RING_SIZE + + sizeof(struct w840_tx_desc)*TX_RING_SIZE, + &np->ring_dma_addr); + if(!np->rx_ring) + return -ENOMEM; + init_rxtx_rings(dev); + return 0; } + static int start_tx(struct sk_buff *skb, struct net_device *dev) { struct netdev_private *np = (struct netdev_private *)dev->priv; unsigned entry; + int len1, len2; /* Caution: the write order is important here, set the field with the "ownership" bits last. */ @@ -830,76 +933,27 @@ entry = np->cur_tx % TX_RING_SIZE; np->tx_skbuff[entry] = skb; - np->tx_ring[entry].buffer1 = virt_to_le32desc(skb->data); - -#define one_buffer -#define BPT 1022 -#if defined(one_buffer) - np->tx_ring[entry].length = cpu_to_le32(DescWholePkt | skb->len); + np->tx_addr[entry] = pci_map_single(np->pdev, + skb->data,skb->len, PCI_DMA_TODEVICE); + np->tx_ring[entry].buffer1 = cpu_to_le32(np->tx_addr[entry]); + len2 = 0; + len1 = skb->len; + if(len1 > TX_BUFLIMIT) { + len1 = TX_BUFLIMIT; + len2 = skb->len-len1; + np->tx_ring[entry].buffer2 = cpu_to_le32(np->tx_addr[entry]+TX_BUFLIMIT); + } + np->tx_ring[entry].length = cpu_to_le32(DescWholePkt | (len2 << 11) | len1); if (entry >= TX_RING_SIZE-1) /* Wrap ring */ np->tx_ring[entry].length |= cpu_to_le32(DescIntr | DescEndRing); + wmb(); np->tx_ring[entry].status = cpu_to_le32(DescOwn); np->cur_tx++; -#elif defined(two_buffer) - if (skb->len > BPT) { - unsigned int entry1 = ++np->cur_tx % TX_RING_SIZE; - np->tx_ring[entry].length = cpu_to_le32(DescStartPkt | BPT); - np->tx_ring[entry1].length = cpu_to_le32(DescEndPkt | (skb->len - BPT)); - np->tx_ring[entry1].buffer1 = virt_to_le32desc((skb->data) + BPT); - np->tx_ring[entry1].status = cpu_to_le32(DescOwn); - np->tx_ring[entry].status = cpu_to_le32(DescOwn); - if (entry >= TX_RING_SIZE-1) - np->tx_ring[entry].length |= cpu_to_le32(DescIntr|DescEndRing); - else if (entry1 >= TX_RING_SIZE-1) - np->tx_ring[entry1].length |= cpu_to_le32(DescIntr|DescEndRing); - np->cur_tx++; - } else { - np->tx_ring[entry].length = cpu_to_le32(DescWholePkt | skb->len); - if (entry >= TX_RING_SIZE-1) /* Wrap ring */ - np->tx_ring[entry].length |= cpu_to_le32(DescIntr | DescEndRing); - np->tx_ring[entry].status = cpu_to_le32(DescOwn); - np->cur_tx++; - } -#elif defined(split_buffer) - { - /* Work around the Tx-FIFO-full bug by splitting our transmit packet - into two pieces, the first which may be loaded without overflowing - the FIFO, and the second which contains the remainder of the - packet. When we get a Tx-done interrupt that frees enough room - in the FIFO we mark the remainder of the packet as loadable. - - This has the problem that the Tx descriptors are written both - here and in the interrupt handler. - */ - - int buf1size = TX_FIFO_SIZE - np->tx_q_bytes; - int buf2size = skb->len - buf1size; - - if (buf2size <= 0) { /* We fit into one descriptor. */ - np->tx_ring[entry].length = cpu_to_le32(DescWholePkt | skb->len); - } else { /* We must use two descriptors. */ - unsigned int entry2; - np->tx_ring[entry].length = - cpu_to_le32(DescIntr | DescStartPkt | buf1size); - if (entry >= TX_RING_SIZE-1) { /* Wrap ring */ - np->tx_ring[entry].length |= cpu_to_le32(DescEndRing); - entry2 = 0; - } else - entry2 = entry + 1; - np->cur_tx++; - np->tx_ring[entry2].buffer1 = - virt_to_le32desc(skb->data + buf1size); - np->tx_ring[entry2].length = cpu_to_le32(DescEndPkt | buf2size); - if (entry2 >= TX_RING_SIZE-1) /* Wrap ring */ - np->tx_ring[entry2].length |= cpu_to_le32(DescEndRing); - } - np->tx_ring[entry].status = cpu_to_le32(DescOwn); - np->cur_tx++; - } -#endif + np->tx_q_bytes += skb->len; writel(0, dev->base_addr + TxStartDemand); + spin_lock_irq(&np->lock); /* Work around horrible bug in the chip by marking the queue as full when we do not have FIFO room for a maximum sized packet. */ if (np->cur_tx - np->dirty_tx > TX_QUEUE_LEN) @@ -911,6 +965,7 @@ netif_stop_queue(dev); dev->trans_start = jiffies; + spin_unlock_irq(&np->lock); if (debug > 4) { printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n", @@ -977,6 +1032,9 @@ np->stats.tx_packets++; } /* Free the original skb. */ + pci_unmap_single(np->pdev,np->tx_addr[entry], + np->tx_skbuff[entry]->len, + PCI_DMA_TODEVICE); np->tx_q_bytes -= np->tx_skbuff[entry]->len; dev_kfree_skb_irq(np->tx_skbuff[entry]); np->tx_skbuff[entry] = 0; @@ -1070,6 +1128,9 @@ && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { skb->dev = dev; skb_reserve(skb, 2); /* 16 byte align the IP header */ + pci_dma_sync_single(np->pdev,np->rx_addr[entry], + np->rx_skbuff[entry]->len, + PCI_DMA_FROMDEVICE); /* Call copy + cksum if available. */ #if HAS_IP_COPYSUM eth_copy_and_sum(skb, np->rx_skbuff[entry]->tail, pkt_len, 0); @@ -1079,15 +1140,11 @@ pkt_len); #endif } else { - char *temp = skb_put(skb = np->rx_skbuff[entry], pkt_len); + pci_unmap_single(np->pdev,np->rx_addr[entry], + np->rx_skbuff[entry]->len, + PCI_DMA_FROMDEVICE); + skb_put(skb = np->rx_skbuff[entry], pkt_len); np->rx_skbuff[entry] = NULL; -#ifndef final_version /* Remove after testing. */ - if (le32desc_to_virt(desc->buffer1) != temp) - printk(KERN_ERR "%s: Internal fault: The skbuff addresses " - "do not match in netdev_rx: %p vs. %p / %p.\n", - dev->name, le32desc_to_virt(desc->buffer1), - skb->head, temp); -#endif } #ifndef final_version /* Remove after testing. */ /* You will want this info for the initial debug. */ @@ -1122,8 +1179,12 @@ if (skb == NULL) break; /* Better luck next round. */ skb->dev = dev; /* Mark as being used by this device. */ - np->rx_ring[entry].buffer1 = virt_to_le32desc(skb->tail); + np->rx_addr[entry] = pci_map_single(np->pdev, + skb->tail, + skb->len, PCI_DMA_FROMDEVICE); + np->rx_ring[entry].buffer1 = cpu_to_le32(np->rx_addr[entry]); } + wmb(); np->rx_ring[entry].status = cpu_to_le32(DescOwn); } @@ -1141,7 +1202,21 @@ if (intr_status == 0xffffffff) return; if (intr_status & TxFIFOUnderflow) { - np->csr6 += 0x4000; /* Bump up the Tx threshold */ + /* Bump up the Tx threshold */ +#if 0 + /* This causes lots of dropped packets, + * and under high load even tx_timeouts + */ + np->csr6 += 0x4000; +#else + int cur = (np->csr6 >> 14)&0x7f; + if (cur < 64) + cur *= 2; + else + cur = 0; /* load full packet before starting */ + np->csr6 &= ~(0x7F << 14); + np->csr6 |= cur<<14; +#endif printk(KERN_DEBUG "%s: Tx underflow, increasing threshold to %8.8x.\n", dev->name, np->csr6); writel(np->csr6, ioaddr + NetworkConfig); @@ -1270,13 +1345,13 @@ #ifdef __i386__ if (debug > 2) { printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n", - (int)virt_to_le32desc(np->tx_ring)); + (int)np->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) printk(" #%d desc. %4.4x %4.4x %8.8x.\n", i, np->tx_ring[i].length, np->tx_ring[i].status, np->tx_ring[i].buffer1); printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", - (int)virt_to_le32desc(np->rx_ring)); + (int)np->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) { printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", i, np->rx_ring[i].length, @@ -1289,19 +1364,7 @@ del_timer_sync(&np->timer); - /* Free all the skbuffs in the Rx queue. */ - for (i = 0; i < RX_RING_SIZE; i++) { - np->rx_ring[i].status = 0; - if (np->rx_skbuff[i]) { - dev_kfree_skb(np->rx_skbuff[i]); - } - np->rx_skbuff[i] = 0; - } - for (i = 0; i < TX_RING_SIZE; i++) { - if (np->tx_skbuff[i]) - dev_kfree_skb(np->tx_skbuff[i]); - np->tx_skbuff[i] = 0; - } + free_rxtx_rings(np); return 0; } @@ -1311,7 +1374,7 @@ struct net_device *dev = pdev->driver_data; /* No need to check MOD_IN_USE, as sys_delete_module() checks. */ - while (dev) { + if (dev) { struct netdev_private *np = (void *)(dev->priv); unregister_netdev(dev); #ifdef USE_IO_OPS
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Dec 31 2000 - 21:00:09 EST