Linux version 2.4.0-test10 (root@zaphod) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 Sun Nov 5 18:06:36 CET 2000
BIOS-provided physical RAM map:
 BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
 BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved)
 BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
 BIOS-e820: 0000000009efc000 @ 0000000000100000 (usable)
 BIOS-e820: 0000000000003000 @ 0000000009ffc000 (ACPI data)
 BIOS-e820: 0000000000001000 @ 0000000009fff000 (ACPI NVS)
 BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009fc00 for 4096 bytes.
On node 0 totalpages: 40956
zone(0): 4096 pages.
zone(1): 36860 pages.
zone(2): 0 pages.
mapped APIC to ffffe000 (012ab000)
Kernel command line: auto BOOT_IMAGE=linux-2.4.0t10 ro root=305 BOOT_FILE=/boot/vmlinuz-2.4.0-test10
Initializing CPU#0
Detected 333.416 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 665.19 BogoMIPS
Memory: 159420k/163824k available (853k kernel code, 4016k reserved, 52k data, 176k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: L1 I Cache: 32K  L1 D Cache: 32K (32 bytes/line)
CPU: AMD-K6(tm) 3D processor stepping 00
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xf0560, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
isapnp: Scanning for Pnp cards...
isapnp: Calling quirk for 01:00
ISAPnP: SB audio device quirk - increasing port range
isapnp: Calling quirk for 01:02
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 Gold'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 78
PCI: No IRQ known for interrupt pin A of device 00:0f.0. Please try using pci=biosirq.
ALI15X3: chipset revision 193
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALL EL5.1A, ATA DISK drive
hdb: QUANTUM FIREBALL_TM2100A, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: PCA382RW IDE, ATAPI CDROM drive
hdd: CD-ROM 32X/AKU, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 10018890 sectors (5130 MB) w/418KiB Cache, CHS=623/255/63, UDMA(33)
hdb: 4124736 sectors (2112 MB) w/76KiB Cache, CHS=1023/64/63, DMA
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
 hdb: hdb1 hdb2
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 176k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 128484k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xca829000, IRQ 9
usb-ohci.c: usb-00:02.0, Acer Laboratories Inc. [ALi] M5237 USB
usb.c: new USB bus registered, assigned bus number 1
usb.c: kmalloc IF c9f609c0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: ca829000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c9f609c0
usb.c: kusbd: /sbin/hotplug add 1
usb.c: registered new driver hid
mice: PS/2 mouse device common for all mice
usb.c: registered new driver audio
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Linux Tulip driver version 0.9.10 (September 6, 2000)
eth0: Digital DS21140 Tulip rev 34 at 0xd800, 00:C0:F0:16:F3:C5, IRQ 10.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
eth0:  MII transceiver #1 config 3000 status 7829 advertising 01e1.
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.