I put the Oops on my web site (see Section 5 for links). BTW, tell me
if I did not do the ksymoops ok !
Jf.
--[1.] One line summary of the problem:
kernel panic while copying files
[2.] Full description of the problem/report:
When I copy a 450 MB file from one partition (/usr) to another (/tmp) I get a kernel panic. It happens everytime I copy that file. The amount of data copied before the kernel panic is not always the same. These two partitions use ext2fs.
[3.] Keywords (i.e., modules, networking, kernel):
xx
[4.] Kernel version (from /proc/version):
The problem happens with kernel 2.4.0-test{1,5,8,9} and it doesn't happen with kernel 2.2.{14,17}
I would like to use newer kernels since I want to add XFS support (SGI's filesystem). Although I must specify that my problems are happening even with kernel that have not had the XFS patch applied.
[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt)
http://volks.suid.com/csrc228.capture http://volks.suid.com/csrc228.capture-ksymed
[6.] A small shell script or example program which triggers the problem (if possible)
cp /usr/blah1 /tmp
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
THIS IS THE OUTPUT WHEN I BOOT THE "WORKING KERNEL" (2.2.17)
[root@csrc228 linux]# sh scripts/ver_linux -- Versions installed: (if some fields are empty or looks -- unusual then possibly you have very old versions) Linux csrc228 2.2.17 #1 Wed Nov 1 10:03:58 EST 2000 i686 unknown Kernel modules 2.3.10-pre1 Gnu C egcs-2.91.66 Binutils 2.9.5.0.22 Linux C Library 2.1.3 Dynamic linker ldd (GNU libc) 2.1.3 Procps 2.0.6 Mount 2.10f Net-tools 1.54 Console-tools 0.3.3 Sh-utils 2.0 Modules Loaded [root@csrc228 linux]#
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 7 model name : Pentium III (Katmai) stepping : 3 cpu MHz : 499.889 cache size : 512 KB fdiv_bug : no hlt_bug : no sep_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr xmm bogomips : 996.15
[7.3.] Module information (from /proc/modules):
no modules loaded
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 02f8-02ff : serial(auto) 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 2000-207f : sym53c8xx 2400-247f : sym53c8xx 4000-401f : Intel Speedo3 Ethernet 4020-403f : Intel Speedo3 Ethernet
[7.5.] PCI information ('lspci -vvv' as root)
00:0b.0 PCI Hot-plug controller: Compaq Computer Corporation: Unknown device a0f7 (rev 04) Subsystem: Compaq Computer Corporation: Unknown device a2f8 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 5 Region 0: Memory at c6af0000 (32-bit, non-prefetchable)
00:0c.0 System peripheral: Compaq Computer Corporation: Unknown device a0f0 Subsystem: Compaq Computer Corporation: Unknown device b0f3 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 1800 Region 1: Memory at c6ae0000 (32-bit, non-prefetchable)
00:0d.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 14) Subsystem: Compaq Computer Corporation Embedded Ultra Wide SCSI Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 17 min, 64 max, 255 set, cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 2000 Region 1: Memory at c6ad0000 (32-bit, non-prefetchable) Region 2: Memory at c6ac0000 (32-bit, non-prefetchable)
00:0d.1 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 14) Subsystem: Compaq Computer Corporation Embedded Ultra Wide SCSI Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 17 min, 64 max, 255 set, cache line size 08 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at 2400 Region 1: Memory at c6ab0000 (32-bit, non-prefetchable) Region 2: Memory at c6aa0000 (32-bit, non-prefetchable)
00:0e.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 7a) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 4756 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 8 min, 64 set, cache line size 08 Region 0: Memory at c5000000 (32-bit, prefetchable) Region 1: I/O ports at 2800 Region 2: Memory at c6a90000 (32-bit, non-prefetchable) Capabilities: [5c] Power Management version 1 Flags: PMEClk- AuxPwr- DSI- D1- D2- PME- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set
00:0f.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 set Region 4: I/O ports at 2c00
00:0f.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 set Interrupt: pin D routed to IRQ 0 Region 4: I/O ports at 2c20
00:0f.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.0 Host bridge: Intel Corporation 450NX - 82451NX Memory & I/O Controller (rev 03) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:12.0 Host bridge: Intel Corporation 450NX - 82454NX PCI Expander Bridge (rev 04) Subsystem: Intel Corporation: Unknown device 84cb Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 set, cache line size 08
00:14.0 Host bridge: Intel Corporation 450NX - 82454NX PCI Expander Bridge (rev 04) Subsystem: Intel Corporation: Unknown device 84cb Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 set, cache line size 08
04:01.0 PCI bridge: IBM IBM27-82351 (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 set, cache line size 08 Bus: primary=04, secondary=05, subordinate=05, sec-latency=248 I/O behind bridge: 00003000-00003fff Memory behind bridge: c6d00000-c6dfffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
04:02.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 set, cache line size 08 Bus: primary=04, secondary=06, subordinate=06, sec-latency=64 I/O behind bridge: 00004000-00004fff Memory behind bridge: c6e00000-c6ffffff Prefetchable memory behind bridge: 00000000c6b00000-00000000c6b00000 BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [dc] Power Management version 1 Flags: PMEClk- AuxPwr- DSI- D1- D2- PME- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:0b.0 PCI Hot-plug controller: Compaq Computer Corporation: Unknown device a0f7 (rev 04) Subsystem: Compaq Computer Corporation: Unknown device a2f8 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 5 Region 0: Memory at c6cf0000 (32-bit, non-prefetchable)
05:00.0 Unknown mass storage controller: Compaq Computer Corporation Smart-2/P RAID Controller (rev 04) Subsystem: Compaq Computer Corporation Smart Array Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set, cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 3000 Region 1: Memory at c6df0000 (32-bit, non-prefetchable)
06:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05) Subsystem: Compaq Computer Corporation NC3131 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 8 min, 56 max, 64 set, cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: Memory at c6bf0000 (32-bit, prefetchable) Region 1: I/O ports at 4000 Region 2: Memory at c6f00000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 1 Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
06:05.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05) Subsystem: Compaq Computer Corporation NC3131 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 8 min, 56 max, 64 set, cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: Memory at c6be0000 (32-bit, prefetchable) Region 1: I/O ports at 4020 Region 2: Memory at c6e00000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 1 Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices: Host: scsi1 Channel: 00 Id: 04 Lun: 00 Vendor: QUANTUM Model: DLT8000 Rev: 0119 Type: Sequential-Access ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
- The machine is a Compaq Proliant which has a RAID array (SMART2).
[root@csrc228 /proc]# free total used free shared buffers cached Mem: 1296208 154624 1141584 8732 124276 6228 -/+ buffers/cache: 24120 1272088 Swap: 526312 0 526312 [root@csrc228 /proc]#
[X.] Other notes, patches, fixes, workarounds:
-- /\/\/\/\/\/\/\/ Jean-Francois Patenaude MGR EXPERT. CTRE CLIENTS SERV. / DIR. CTRE EXP. SERVICE CLIENTS 700 DE LA GAUCHETIERE OUEST RC-MEZ MONTREAL (QUEBEC) H3B 4L1 Tel: (514) 870-3190 Fax: (514) 391-8660 Pag: (514) 330-4479 /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ jf.patenaude@bell.ca
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Nov 07 2000 - 21:00:20 EST