Thanks for your work with the OnStream driver! Unfortunately, I'm
having some trouble getting it to work. It looks like my kernel
(2.2.17) detects the drive properly, but I keep getting I/O errors
when I stat it. My drive is a slave on my second ide channel
(/dev/hdd). I'd really appreciate any advice you could offer.
Thanks,
--Noel
mt -f /dev/nht0 status
/dev/nht0: Device or resource busy
tail /var/log/messages
kernel: ide-tape: hdd <-> ht0: OnStream DI-30 rev 1.08
kernel: ide-tape: hdd <-> ht0: 990KBps, 64*32kB buffer, 10208kB pipeline, 60ms tDSC
kernel: ide-tape: ht0: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0
kernel: ide-tape: ht0: drive not ready
Kernel:
linux-2.2.17
ide.2.2.17.all.20000904.patch.bz2
cat /proc/ide/hdd/model
OnStream DI-30
cat /proc/ide/hdd/driver
ide-tape version 1.16f
cat /proc/ide/hdd/settings
name value min max mode
---- ----- --- --- ----
avg_speed 0 0 65535 r
buffer 2048 0 32767 r
cur_frames 0 0 65535 r
current_speed 0 0 69 rw
debug_level 0 0 65535 rw
dsc_overlap 1 0 1 rw
ide_scsi 0 0 1 rw
init_speed 0 0 69 rw
insert_size 0 0 65535 r
insert_speed 0 0 65535 r
io_32bit 0 0 3 rw
keepsettings 0 0 1 rw
max_frames 0 0 65535 r
max_insert_speed 500 0 65535 rw
nice1 1 0 1 rw
number 3 0 3 rw
pio_mode write-only 0 255 w
pipeline 10208 64 2097120 rw
pipeline_head_speed_c 0 0 65535 r
pipeline_head_speed_u 0 0 65535 r
pipeline_max 20416 64 2097120 rw
pipeline_min 10208 64 2097120 rw
pipeline_pending 0 0 2097120 r
pipeline_used 0 0 2097120 r
slow 0 0 1 rw
speed 990 0 65535 r
speed_control 1 0 65535 rw
stage 32 0 63 r
tape_still_time 0 0 65535 r
tdsc 60 50 400 rw
unmaskirq 0 0 1 rw
using_dma 0 0 1 rw
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Oct 23 2000 - 21:00:10 EST