[PATCH] make mousedev resolution module parameter

From: Erik Mouw (J.A.K.Mouw@ITS.TUDelft.NL)
Date: Sun Oct 15 2000 - 10:09:37 EST

Next message: Chris Kloiber: "[OT] Re: Oops on booting stock RH6"
Previous message: Andi Kleen: "Re: rotr32 / rotl32 (wordops.h) in 2.4.x ?"
Next in thread: Vojtech Pavlik: "Re: [PATCH] make mousedev resolution module parameter"
Reply: Vojtech Pavlik: "Re: [PATCH] make mousedev resolution module parameter"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

(Second try, this time with the correct mailing list address. Duh.)

Hi,

This patch makes the X and Y resolution in drivers/input/mousedev.c a
module parameter. In this way the screen resolution can be set by
using:

modprobe mousedev xres=1280 yres=1024

The configure-time resolution is used as a default resolution. The
patch is against 2.4.0-test10-pre3. Please consider applying.

Erik

-- J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department of Electrical Engineering, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: J.A.K.Mouw@its.tudelft.nl WWW: http://www-ict.its.tudelft.nl/~erik/

text/plain attachment: mousedev.diff

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/

Next message: Chris Kloiber: "[OT] Re: Oops on booting stock RH6"
Previous message: Andi Kleen: "Re: rotr32 / rotl32 (wordops.h) in 2.4.x ?"
Next in thread: Vojtech Pavlik: "Re: [PATCH] make mousedev resolution module parameter"
Reply: Vojtech Pavlik: "Re: [PATCH] make mousedev resolution module parameter"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Sun Oct 15 2000 - 21:00:28 EST