RE: configuring from kernel source directory

From: Tan Chee Wei (eng80386@nus.edu.sg)
Date: Wed Sep 13 2000 - 09:59:06 EST


Chris, Thanks a lot ! I think i have found out what the problem is . The
symbolic link for asm/ in the old src dir is copied as a directory in the
new one. Hence I deleted the directory in the new source directory and made
it into a soft link.

rgds.
chee-wei

-----Original Message-----
From: Mason, Christopher (Paging) Engineering
To: 'Tan Chee Wei'; Mason, Christopher (Paging) Engineering;
''linux-kernel@vger.kernel.org' '
Sent: 9/13/00 10:46 PM
Subject: RE: configuring from kernel source directory

It is probably down to when you do cp -Rr x x, you are not copying the
symlinks or something, no doubt someone here will know what the problem
is.

I usually find when I copy things with symlinks in I usually tar it up,
using tar -zcvf x.tar.gz *, then untar it at the required location,
especially if I am moving it to DOS partitions.

-----Original Message-----
From: Tan Chee Wei [mailto:eng80386@nus.edu.sg]
Sent: 13 September 2000 15:43
To: 'Mason, Christopher (Paging) Engineering '; Tan Chee Wei;
''linux-kernel@vger.kernel.org' '
Subject: RE: configuring from kernel source directory

 hallo ,

Thanks for the quick reply !
However, after make clean && make mrproper have been done, the same
error
message:

[root@edge1 linux-2.2]# make xconfig
rm -f include/asm
rm: include/asm: is a directory
make: *** [symlinks] Error 1

 appears

There is also an error message from make mrproper :
rm -f include/asm
rm: include/asm: is a directory

How should I resolve this ?

ciao
chee-wei

-----Original Message-----
From: Mason, Christopher (Paging) Engineering
To: 'Tan Chee Wei'; 'linux-kernel@vger.kernel.org'
Sent: 9/13/00 10:31 PM
Subject: RE: configuring from kernel source directory

You tried doing a make clean && make mrproper first in the
/usr/src/2.2.5_New before doing make xconfig. I think I had this
problem
before.

-----Original Message-----
From: Tan Chee Wei [mailto:eng80386@nus.edu.sg]
Sent: 13 September 2000 15:27
To: 'linux-kernel@vger.kernel.org'
Subject: configuring from kernel source directory

hallo ,
To back up a linux source directory, I tried a $ cp -Rr
/usr/src/linux2.2.5
/usr/src/2.2.5_New
and then I made the soft link to point to the new directory.
My question is why does 'make xconfig' or any 'make config' in the new
directory does not work ,even though the .config file is the same in the
original and the new one?
 The following errors are encountered.
    rm -f include/asm
   rm: include/asm: is a directory
   make: *** [symlinks] Error 1

But strange enough, make xconfig works in the original old kernel source
directory.
Thanks !
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

--

Vodafone Paging Limited Registered Office: The Courtyard, 2-4 London Road, Newbury, Berks RG14 1JX Registered in England No. 1964836

--

Vodafone Paging Limited Registered Office: The Courtyard, 2-4 London Road, Newbury, Berks RG14 1JX Registered in England No. 1964836

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Fri Sep 15 2000 - 21:00:21 EST