Hi!
> > At work i have a Toshiba 4090CDS Laptop with a single ethernet card (uses
> > 8390 module i think). I have no other cards. Using kernel 2.4.0-test4 and
> > all previous, i can boot the machine and it will detect the card if it is
> > plugged into either of the 2 slots (0 or 1). However, with 2.4.0-test6 (and
> > maybe test5 not tested fully yet but can do) the card only gets detected if
> > it is instaled in slot 0. It does not make any difference if you boot with
> > the card in place or put it in after booting.
>
> Hmm. I have a Toshiba 4070CDT. i82365.o which I used to use
> disappeared from -test5. So what's the secret incantation to now?
Remember that I have same machine and same problem: pcmcia does not
work for me any more:
Aug 12 00:41:09 bug cardmgr[126]: starting, version is 3.0.14
Aug 12 00:41:09 bug cardmgr[126]: no pcmcia driver in /proc/devices
Aug 12 00:41:09 bug cardmgr[126]: exiting
If you find solution, let me know.
Pavel
-- I'm pavel@ucw.cz. "In my country we have almost anarchy and I don't care." Panos Katsaloulis describing me w.r.t. patents at discuss@linmodems.org- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Aug 15 2000 - 21:00:27 EST